[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20241107075803.2cf33ab4@akair>
Date: Thu, 7 Nov 2024 07:58:03 +0100
From: Andreas Kemnade <andreas@...nade.info>
To: Rob Herring <robh@...nel.org>, Tero Kristo <kristo@...nel.org>,
rogerq@...nel.org
Cc: Michael Turquette <mturquette@...libre.com>, Krzysztof Kozlowski
<krzk+dt@...nel.org>, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, linux-omap@...r.kernel.org, Tony Lindgren
<tony@...mide.com>, Conor Dooley <conor+dt@...nel.org>, Stephen Boyd
<sboyd@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH] dt-bindings: clock: ti: Convert mux.txt to json-schema
Am Tue, 5 Nov 2024 07:52:34 -0600
schrieb Rob Herring <robh@...nel.org>:
> On Mon, Nov 04, 2024 at 02:55:49PM +0100, Andreas Kemnade wrote:
> > Convert the OMAP mux clock device tree binding to json-schema.
> > Specify the creator of the original binding as a maintainer.
> > Choose GPL-only license because original binding was also GPL.
> >
> > Signed-off-by: Andreas Kemnade <andreas@...nade.info>
> > ---
> > .../bindings/clock/ti/composite.txt | 2 +-
> > .../devicetree/bindings/clock/ti/mux.txt | 78 -----------
> > .../bindings/clock/ti/ti,mux-clock.yaml | 123 ++++++++++++++++++
> > 3 files changed, 124 insertions(+), 79 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/clock/ti/mux.txt
> > create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
> > index b02f22490dcb..238e6f7d74f8 100644
> > --- a/Documentation/devicetree/bindings/clock/ti/composite.txt
> > +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
> > @@ -16,7 +16,7 @@ merged to this clock. The component clocks shall be of one of the
> > "ti,*composite*-clock" types.
> >
> > [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> > -[2] Documentation/devicetree/bindings/clock/ti/mux.txt
> > +[2] Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
> > [3] Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
> > [4] Documentation/devicetree/bindings/clock/ti/gate.txt
> >
> > diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
> > deleted file mode 100644
> > index cd56d3c1c09f..000000000000
> > --- a/Documentation/devicetree/bindings/clock/ti/mux.txt
> > +++ /dev/null
> > @@ -1,78 +0,0 @@
> > -Binding for TI mux clock.
> > -
> > -This binding uses the common clock binding[1]. It assumes a
> > -register-mapped multiplexer with multiple input clock signals or
> > -parents, one of which can be selected as output. This clock does not
> > -gate or adjust the parent rate via a divider or multiplier.
> > -
> > -By default the "clocks" property lists the parents in the same order
> > -as they are programmed into the register. E.g:
> > -
> > - clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
> > -
> > -results in programming the register as follows:
> > -
> > -register value selected parent clock
> > -0 foo_clock
> > -1 bar_clock
> > -2 baz_clock
> > -
> > -Some clock controller IPs do not allow a value of zero to be programmed
> > -into the register, instead indexing begins at 1. The optional property
> > -"index-starts-at-one" modified the scheme as follows:
> > -
> > -register value selected clock parent
> > -1 foo_clock
> > -2 bar_clock
> > -3 baz_clock
> > -
> > -The binding must provide the register to control the mux. Optionally
> > -the number of bits to shift the control field in the register can be
> > -supplied. If the shift value is missing it is the same as supplying
> > -a zero shift.
> > -
> > -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> > -
> > -Required properties:
> > -- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
> > -- #clock-cells : from common clock binding; shall be set to 0.
> > -- clocks : link phandles of parent clocks
> > -- reg : register offset for register controlling adjustable mux
> > -
> > -Optional properties:
> > -- clock-output-names : from common clock binding.
> > -- ti,bit-shift : number of bits to shift the bit-mask, defaults to
> > - 0 if not present
> > -- ti,index-starts-at-one : valid input select programming starts at 1, not
> > - zero
> > -- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
> > - not supported by the composite-mux-clock subtype
> > -- ti,latch-bit : latch the mux value to HW, only needed if the register
> > - access requires this. As an example, dra7x DPLL_GMAC H14 muxing
> > - implements such behavior.
> > -
> > -Examples:
> > -
> > -sys_clkin_ck: sys_clkin_ck@...06110 {
> > - #clock-cells = <0>;
> > - compatible = "ti,mux-clock";
> > - clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
> > - reg = <0x0110>;
> > - ti,index-starts-at-one;
> > -};
> > -
> > -abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@...06108 {
> > - #clock-cells = <0>;
> > - compatible = "ti,mux-clock";
> > - clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
> > - ti,bit-shift = <24>;
> > - reg = <0x0108>;
> > -};
> > -
> > -mcbsp5_mux_fck: mcbsp5_mux_fck {
> > - #clock-cells = <0>;
> > - compatible = "ti,composite-mux-clock";
> > - clocks = <&core_96m_fck>, <&mcbsp_clks>;
> > - ti,bit-shift = <4>;
> > - reg = <0x02d8>;
> > -};
> > diff --git a/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
> > new file mode 100644
> > index 000000000000..b271ab86dde1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
> > @@ -0,0 +1,123 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
>
> Surely TI as the only author of the original binding would agree to
> dual-license this?
>
So there is a question mark. So you are waiting for some confirmation
form TI?
Regards,
Andreas
Powered by blists - more mailing lists