| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <36b61684-fede-4422-bd54-0421e6a0fc23@kernel.org>
Date: Fri, 8 Nov 2024 15:03:01 +0200
From: Roger Quadros <rogerq@...nel.org>
To: Andreas Kemnade <andreas@...nade.info>, Rob Herring <robh@...nel.org>,
Tero Kristo <kristo@...nel.org>
Cc: Michael Turquette <mturquette@...libre.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, linux-omap@...r.kernel.org,
Tony Lindgren <tony@...mide.com>, Conor Dooley <conor+dt@...nel.org>,
Stephen Boyd <sboyd@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH] dt-bindings: clock: ti: Convert mux.txt to json-schema
Hi Andreas,
On 07/11/2024 08:58, Andreas Kemnade wrote:
> Am Tue, 5 Nov 2024 07:52:34 -0600
> schrieb Rob Herring <robh@...nel.org>:
>
>> On Mon, Nov 04, 2024 at 02:55:49PM +0100, Andreas Kemnade wrote:
>>> Convert the OMAP mux clock device tree binding to json-schema.
>>> Specify the creator of the original binding as a maintainer.
>>> Choose GPL-only license because original binding was also GPL.
>>>
>>> Signed-off-by: Andreas Kemnade <andreas@...nade.info>
>>> ---
>>> .../bindings/clock/ti/composite.txt | 2 +-
>>> .../devicetree/bindings/clock/ti/mux.txt | 78 -----------
>>> .../bindings/clock/ti/ti,mux-clock.yaml | 123 ++++++++++++++++++
>>> 3 files changed, 124 insertions(+), 79 deletions(-)
>>> delete mode 100644 Documentation/devicetree/bindings/clock/ti/mux.txt
>>> create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
>>> index b02f22490dcb..238e6f7d74f8 100644
>>> --- a/Documentation/devicetree/bindings/clock/ti/composite.txt
>>> +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
>>> @@ -16,7 +16,7 @@ merged to this clock. The component clocks shall be of one of the
>>> "ti,*composite*-clock" types.
>>>
>>> [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>>> -[2] Documentation/devicetree/bindings/clock/ti/mux.txt
>>> +[2] Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
>>> [3] Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
>>> [4] Documentation/devicetree/bindings/clock/ti/gate.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
>>> deleted file mode 100644
>>> index cd56d3c1c09f..000000000000
>>> --- a/Documentation/devicetree/bindings/clock/ti/mux.txt
>>> +++ /dev/null
>>> @@ -1,78 +0,0 @@
>>> -Binding for TI mux clock.
>>> -
>>> -This binding uses the common clock binding[1]. It assumes a
>>> -register-mapped multiplexer with multiple input clock signals or
>>> -parents, one of which can be selected as output. This clock does not
>>> -gate or adjust the parent rate via a divider or multiplier.
>>> -
>>> -By default the "clocks" property lists the parents in the same order
>>> -as they are programmed into the register. E.g:
>>> -
>>> - clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
>>> -
>>> -results in programming the register as follows:
>>> -
>>> -register value selected parent clock
>>> -0 foo_clock
>>> -1 bar_clock
>>> -2 baz_clock
>>> -
>>> -Some clock controller IPs do not allow a value of zero to be programmed
>>> -into the register, instead indexing begins at 1. The optional property
>>> -"index-starts-at-one" modified the scheme as follows:
>>> -
>>> -register value selected clock parent
>>> -1 foo_clock
>>> -2 bar_clock
>>> -3 baz_clock
>>> -
>>> -The binding must provide the register to control the mux. Optionally
>>> -the number of bits to shift the control field in the register can be
>>> -supplied. If the shift value is missing it is the same as supplying
>>> -a zero shift.
>>> -
>>> -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>>> -
>>> -Required properties:
>>> -- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
>>> -- #clock-cells : from common clock binding; shall be set to 0.
>>> -- clocks : link phandles of parent clocks
>>> -- reg : register offset for register controlling adjustable mux
>>> -
>>> -Optional properties:
>>> -- clock-output-names : from common clock binding.
>>> -- ti,bit-shift : number of bits to shift the bit-mask, defaults to
>>> - 0 if not present
>>> -- ti,index-starts-at-one : valid input select programming starts at 1, not
>>> - zero
>>> -- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
>>> - not supported by the composite-mux-clock subtype
>>> -- ti,latch-bit : latch the mux value to HW, only needed if the register
>>> - access requires this. As an example, dra7x DPLL_GMAC H14 muxing
>>> - implements such behavior.
>>> -
>>> -Examples:
>>> -
>>> -sys_clkin_ck: sys_clkin_ck@...06110 {
>>> - #clock-cells = <0>;
>>> - compatible = "ti,mux-clock";
>>> - clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
>>> - reg = <0x0110>;
>>> - ti,index-starts-at-one;
>>> -};
>>> -
>>> -abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@...06108 {
>>> - #clock-cells = <0>;
>>> - compatible = "ti,mux-clock";
>>> - clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
>>> - ti,bit-shift = <24>;
>>> - reg = <0x0108>;
>>> -};
>>> -
>>> -mcbsp5_mux_fck: mcbsp5_mux_fck {
>>> - #clock-cells = <0>;
>>> - compatible = "ti,composite-mux-clock";
>>> - clocks = <&core_96m_fck>, <&mcbsp_clks>;
>>> - ti,bit-shift = <4>;
>>> - reg = <0x02d8>;
>>> -};
>>> diff --git a/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
>>> new file mode 100644
>>> index 000000000000..b271ab86dde1
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
>>> @@ -0,0 +1,123 @@
>>> +# SPDX-License-Identifier: GPL-2.0-only
>>
>> Surely TI as the only author of the original binding would agree to
>> dual-license this?
>>
> So there is a question mark. So you are waiting for some confirmation
> form TI?
TI code uses below license clause. So better to stick to that.
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
--
cheers,
-roger
Powered by blists - more mailing lists