| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <trinity-d08557e5-9d2e-45e0-b9e2-45864ef192ff-1731234046657@trinity-msg-rest-gmx-gmx-live-c75c5fb4b-6zcvs> Date: Sun, 10 Nov 2024 10:20:46 +0000 From: Frank Wunderlich <frank-w@...lic-files.de> To: frank-w@...lic-files.de, andrew@...n.ch, linux@...web.de Cc: dlemoal@...nel.org, cassel@...nel.org, robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org, gregory.clement@...tlin.com, sebastian.hesselbarth@...il.com, linux@...linux.org.uk, hdegoede@...hat.com, axboe@...nel.dk, linux-ide@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org Subject: Aw: Re: [PATCH v1 1/3] arm64: dts: marvell: Fix anyOf conditional failed > Gesendet: Sonntag, 10. November 2024 um 10:25 > Von: "Frank Wunderlich" <frank-w@...lic-files.de> > Am 9. November 2024 18:29:44 MEZ schrieb Andrew Lunn <andrew@...n.ch>: > >On Sat, Nov 09, 2024 at 10:46:19AM +0100, Frank Wunderlich wrote: > >> From: Frank Wunderlich <frank-w@...lic-files.de> > >> > >> after converting the ahci-platform binding to yaml the following files > >> reporting "'anyOf' conditional failed" on > >> > >> sata@...000: sata-port@0 ... > > > >I don't know the yaml too well, but it is not obvious how adding a few > >status = "disabled"; status = "okay"; fixes a "'anyOf' conditional failed". > > > >Maybe you can expand the explanation a bit? > > > > Andrew > > Hi angelo, > > I guess the dtbs_check only checks required properties from yaml if the node is enabled. > > As you know, phys that can supply different types (sata,usb,pcie,*gmii,...),but only one mode can be used per phy. So only one controller can be used with it,the other(s) can not. I do not know marvell,but there are similar in mediatek (xsphy) and rockchip (combphy). > > From my PoV it makes sense to check only enabled nodes for required properties,but i do not know internals of dtbs_check. This patch is 2 years old and i only rebased it and run dtbs check with the others to have a clean result...i can test again without this one to check if anyOf is shown again. > > regards Frank Hi issue is still there and patch is still needed...without it i get these messages: $ ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/ata/ahci-platform.yaml UPD include/config/kernel.release DTC [C] arch/arm64/boot/dts/marvell/armada-7040-db.dtb arch/arm64/boot/dts/marvell/armada-7040-db.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/armada-7040-mochabin.dtb DTC [C] arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/armada-8040-db.dtb DTC [C] arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dtb arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dtb DTC [C] arch/arm64/boot/dts/marvell/cn9130-db.dtb arch/arm64/boot/dts/marvell/cn9130-db.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/cn9130-db-B.dtb arch/arm64/boot/dts/marvell/cn9130-db-B.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/cn9131-db.dtb arch/arm64/boot/dts/marvell/cn9131-db.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# /media/data_ext/git/kernel/BPI-R2-4.14/arch/arm64/boot/dts/marvell/cn9131-db.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/cn9131-db-B.dtb arch/arm64/boot/dts/marvell/cn9131-db-B.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# arch/arm64/boot/dts/marvell/cn9131-db-B.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/cn9132-db.dtb arch/arm64/boot/dts/marvell/cn9132-db.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# arch/arm64/boot/dts/marvell/cn9132-db.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# arch/arm64/boot/dts/marvell/cn9132-db.dtb: sata@...000: sata-port@1: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/cn9132-db-B.dtb arch/arm64/boot/dts/marvell/cn9132-db-B.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# arch/arm64/boot/dts/marvell/cn9132-db-B.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# arch/arm64/boot/dts/marvell/cn9132-db-B.dtb: sata@...000: sata-port@1: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/cn9130-crb-A.dtb DTC [C] arch/arm64/boot/dts/marvell/cn9130-crb-B.dtb arch/arm64/boot/dts/marvell/cn9130-crb-B.dtb: sata@...000: sata-port@1: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dtb arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: sata@...000: sata-port@1: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: sata@...000: sata-port@1: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: sata@...000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# DTC [C] arch/arm64/boot/dts/marvell/cn9132-clearfog.dtb that imho confirms my guess that only enabled nodes are checked and without the disabled this node is always enabled and by disabling the SoC-node and enabling at board-level let the others (here printed) disabled and so not need the required properties. i can try to add short description about it, something like this: The dtbs-check only checks enabled nodes and there required nodes must be present. Nodes are enabled by default (current state for sata@...000 node), but some boards seem to use the phy somewhere else or just not want to use the sata contoller and so miss the required properties 'phys' and 'target-supply'. So disable the sata@...000 node at SoC level and enable it where it is filled with required properties. maybe adding this phrase to commit is enough? regards Frank</frank-w@...lic-files.de></andrew@...n.ch></frank-w@...lic-files.de>
Powered by blists - more mailing lists