[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20241115193359.3618020-1-robh@kernel.org>
Date: Fri, 15 Nov 2024 13:33:59 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: ti: Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties
Remove "ti,(rx|tx)-fifo-depth" properties which are both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.
There are similar properties, but DP83867_PHYCR_FIFO_DEPTH_4_B_NIB
represents the default value so adding them is not necessary.
Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index e06a3b178b34..8f64d6272b1b 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -201,8 +201,6 @@ cpsw3g_phy0: ethernet-phy@0 {
reset-gpios = <&main_gpio0 44 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
- ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
@@ -230,8 +228,6 @@ icssg1_phy03: ethernet-phy@3 {
reset-gpios = <&main_gpio1 47 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
- ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
@@ -242,8 +238,6 @@ icssg1_phy0c: ethernet-phy@c {
reset-gpios = <&main_gpio1 51 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
- ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
--
2.45.2
Powered by blists - more mailing lists