[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <7qx65y6o4fvnnnspof2exzk7xru4bgpda43655deeu7hw6wowt@zcnpzyw2xutm>
Date: Fri, 15 Nov 2024 16:20:18 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Stephan Gerhold <stephan.gerhold@...aro.org>
Cc: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>, Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>, David Airlie <airlied@...il.com>,
Simona Vetter <simona@...ll.ch>, Abel Vesa <abel.vesa@...aro.org>, linux-arm-msm@...r.kernel.org,
dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Johan Hovold <johan@...nel.org>, stable@...r.kernel.org
Subject: Re: [PATCH] drm/msm/dpu: fix x1e80100 intf_6 underrun/vsync interrupt
On Fri, Nov 15, 2024 at 01:55:13PM +0100, Stephan Gerhold wrote:
> The IRQ indexes for the intf_6 underrun/vsync interrupts are swapped.
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16) is the actual underrun interrupt and
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17) is the vsync interrupt.
>
> This causes timeout errors when using the DP2 controller, e.g.
> [dpu error]enc37 frame done timeout
> *ERROR* irq timeout id=37, intf_mode=INTF_MODE_VIDEO intf=6 wb=-1, pp=2, intr=0
> *ERROR* wait disable failed: id:37 intf:6 ret:-110
>
> Correct them to fix these errors and make DP2 work properly.
>
> Cc: stable@...r.kernel.org
> Fixes: e3b1f369db5a ("drm/msm/dpu: Add X1E80100 support")
> Signed-off-by: Stephan Gerhold <stephan.gerhold@...aro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
This matches other DPU hardware, so
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
--
With best wishes
Dmitry
Powered by blists - more mailing lists