linux-kernel - [PATCH v4 2/3] drm/rockchip: vop2: Add clock resets support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20241115162120.83990-3-detlev.casanova@collabora.com>
Date: Fri, 15 Nov 2024 11:20:41 -0500
From: Detlev Casanova <detlev.casanova@...labora.com>
To: linux-kernel@...r.kernel.org
Cc: Sandy Huang <hjc@...k-chips.com>,
	Heiko Stübner <heiko@...ech.de>,
	Andy Yan <andy.yan@...k-chips.com>,
	David Airlie <airlied@...il.com>,
	Simona Vetter <simona@...ll.ch>,
	Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
	Maxime Ripard <mripard@...nel.org>,
	Thomas Zimmermann <tzimmermann@...e.de>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Heiko Stuebner <heiko.stuebner@...rry.de>,
	Sebastian Reichel <sebastian.reichel@...labora.com>,
	Dragan Simic <dsimic@...jaro.org>,
	Alexey Charkov <alchark@...il.com>,
	Jianfeng Liu <liujianfeng1994@...il.com>,
	Cristian Ciocaltea <cristian.ciocaltea@...labora.com>,
	dri-devel@...ts.freedesktop.org,
	devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org,
	kernel@...labora.com,
	Detlev Casanova <detlev.casanova@...labora.com>
Subject: [PATCH v4 2/3] drm/rockchip: vop2: Add clock resets support

At the end of initialization, each VP clock needs to be reset before
they can be used.

Failing to do so can put the VOP in an undefined state where the
generated HDMI signal is either lost or not matching the selected mode.

This issue can be reproduced by switching modes multiple times.
Depending on the setup, after about 10 mode switches, the signal will be
lost and the value in register 0x890 (VSYNCWIDTH + VFRONT) will take the value
`0x0000018c`.
That makes VSYNCWIDTH=0, which is wrong.

Adding the clock resets after the VOP configuration fixes the issue.

Signed-off-by: Detlev Casanova <detlev.casanova@...labora.com>
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 30 ++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
index 9ad025aa9ab05..42e165e42c833 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 #include <linux/swab.h>
 
 #include <drm/drm.h>
@@ -157,6 +158,7 @@ struct vop2_win {
 struct vop2_video_port {
 	struct drm_crtc crtc;
 	struct vop2 *vop2;
+	struct reset_control *dclk_rst;
 	struct clk *dclk;
 	unsigned int id;
 	const struct vop2_video_port_data *data;
@@ -2060,6 +2062,26 @@ static int us_to_vertical_line(struct drm_display_mode *mode, int us)
 	return us * mode->clock / mode->htotal / 1000;
 }
 
+static int vop2_clk_reset(struct vop2_video_port *vp)
+{
+	struct reset_control *rstc = vp->dclk_rst;
+	struct vop2 *vop2 = vp->vop2;
+	int ret;
+
+	if (!rstc)
+		return 0;
+
+	ret = reset_control_assert(rstc);
+	if (ret < 0)
+		drm_warn(vop2->drm, "failed to assert reset\n");
+	udelay(10);
+	ret = reset_control_deassert(rstc);
+	if (ret < 0)
+		drm_warn(vop2->drm, "failed to deassert reset\n");
+
+	return ret;
+}
+
 static void vop2_crtc_atomic_enable(struct drm_crtc *crtc,
 				    struct drm_atomic_state *state)
 {
@@ -2202,6 +2224,8 @@ static void vop2_crtc_atomic_enable(struct drm_crtc *crtc,
 
 	vop2_crtc_atomic_try_set_gamma(vop2, vp, crtc, crtc_state);
 
+	vop2_clk_reset(vp);
+
 	drm_crtc_vblank_on(crtc);
 
 	vop2_unlock(vop2);
@@ -2891,6 +2915,12 @@ static int vop2_create_crtcs(struct vop2 *vop2)
 		vp->data = vp_data;
 
 		snprintf(dclk_name, sizeof(dclk_name), "dclk_vp%d", vp->id);
+		vp->dclk_rst = devm_reset_control_get_optional(vop2->dev, dclk_name);
+		if (IS_ERR(vp->dclk_rst)) {
+		        drm_err(vop2->drm, "failed to get %s reset\n", dclk_name);
+		        return PTR_ERR(vp->dclk_rst);
+		}
+
 		vp->dclk = devm_clk_get(vop2->dev, dclk_name);
 		if (IS_ERR(vp->dclk)) {
 			drm_err(vop2->drm, "failed to get %s\n", dclk_name);
-- 
2.47.0