| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241118052839.382431-7-quic_varada@quicinc.com>
Date: Mon, 18 Nov 2024 10:58:39 +0530
From: Varadarajan Narayanan <quic_varada@...cinc.com>
To: <vkoul@...nel.org>, <kishon@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<gregkh@...uxfoundation.org>, <andersson@...nel.org>,
<konradybcio@...nel.org>, <dmitry.baryshkov@...aro.org>,
<mantas@...vices.com>, <manivannan.sadhasivam@...aro.org>,
<abel.vesa@...aro.org>, <quic_kriskura@...cinc.com>,
<quic_rohiagar@...cinc.com>, <quic_kbajaj@...cinc.com>,
<quic_varada@...cinc.com>, <quic_wcheng@...cinc.com>,
<linux-arm-msm@...r.kernel.org>, <linux-phy@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>
Subject: [PATCH v4 6/6] arm64: dts: qcom: Add USB controller and phy nodes for IPQ5424
The IPQ5424 SoC has both USB2.0 and USB3.0 controllers. The USB3.0
can connect to either of USB2.0 or USB3.0 phy and operate in the
respective mode.
Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
---
v4: Fix regulator names to match with other Qualcomm DT files
v3: Regulator node names, labels and 'regulator-name' changed per review suggestions
Stray newline removed
v2: Add dm/dp_hs_phy_irq to usb3@...0000 node
Add u1/u2-entry quirks to usb@...0000 node
---
arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 66 ++++++++
arch/arm64/boot/dts/qcom/ipq5424.dtsi | 159 ++++++++++++++++++++
2 files changed, 225 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
index d4d31026a026..dae83fe642ef 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -16,12 +16,70 @@ / {
aliases {
serial0 = &uart1;
};
+
+ vreg_misc_3p3: regulator-usb-3p3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "usb_hs_vdda_3p3";
+ };
+
+ vreg_misc_1p8: regulator-usb-1p8 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "vdda_1p8_usb";
+ };
+
+ vreg_misc_0p925: regulator-usb-0p925 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "vdd_core_usb";
+ };
+};
+
+&dwc_0 {
+ dr_mode = "host";
+};
+
+&dwc_1 {
+ dr_mode = "host";
+};
+
+&qusb_phy_0 {
+ vdd-supply = <&vreg_misc_0p925>;
+ vdda-pll-supply = <&vreg_misc_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
+
+ status = "okay";
+};
+
+&qusb_phy_1 {
+ vdd-supply = <&vreg_misc_0p925>;
+ vdda-pll-supply = <&vreg_misc_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
+
+ status = "okay";
};
&sleep_clk {
clock-frequency = <32000>;
};
+&ssphy_0 {
+ vdda-pll-supply = <&vreg_misc_1p8>;
+ vdda-phy-supply = <&vreg_misc_0p925>;
+
+ status = "okay";
+};
+
&tlmm {
sdc_default_state: sdc-default-state {
clk-pins {
@@ -53,6 +111,14 @@ &uart1 {
status = "okay";
};
+&usb2 {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
&xo_board {
clock-frequency = <24000000>;
};
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 5e219f900412..f8afd6f0412d 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -233,6 +233,165 @@ intc: interrupt-controller@...0000 {
msi-controller;
};
+ qusb_phy_1: phy@...00 {
+ compatible = "qcom,ipq5424-qusb2-phy";
+ reg = <0 0x00071000 0 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+ status = "disabled";
+ };
+
+ usb2: usb2@...0000 {
+ compatible = "qcom,ipq5424-dwc3", "qcom,dwc3";
+ reg = <0 0x01ef8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB1_MASTER_CLK>,
+ <&gcc GCC_USB1_SLEEP_CLK>,
+ <&gcc GCC_USB1_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_CNOC_USB_CLK>;
+
+ clock-names = "core",
+ "sleep",
+ "mock_utmi",
+ "iface",
+ "cfg_noc";
+
+ assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
+ <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <200000000>,
+ <24000000>;
+
+ interrupts-extended = <&intc GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "qusb2_phy",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
+
+ resets = <&gcc GCC_USB1_BCR>;
+ qcom,select-utmi-as-pipe-clk;
+ status = "disabled";
+
+ dwc_1: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x01e00000 0 0xe000>;
+ clocks = <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+ clock-names = "ref";
+ interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&qusb_phy_1>;
+ phy-names = "usb2-phy";
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
+ qusb_phy_0: phy@...00 {
+ compatible = "qcom,ipq5424-qusb2-phy";
+ reg = <0 0x0007b000 0 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+ status = "disabled";
+ };
+
+ ssphy_0: phy@...00 {
+ compatible = "qcom,ipq5424-qmp-usb3-phy";
+ reg = <0 0x0007d000 0 0xa00>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB0_AUX_CLK>,
+ <&xo_board>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB0_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+
+ resets = <&gcc GCC_USB0_PHY_BCR>,
+ <&gcc GCC_USB3PHY_0_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ #clock-cells = <0>;
+ clock-output-names = "usb0_pipe_clk";
+
+ status = "disabled";
+ };
+
+ usb3: usb3@...0000 {
+ compatible = "qcom,ipq5424-dwc3", "qcom,dwc3";
+ reg = <0 0x08af8800 0 0x400>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_CNOC_USB_CLK>;
+
+ clock-names = "core",
+ "sleep",
+ "mock_utmi",
+ "iface",
+ "cfg_noc";
+
+ assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <200000000>,
+ <24000000>;
+
+ interrupts-extended = <&intc GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "qusb2_phy",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
+
+ resets = <&gcc GCC_USB_BCR>;
+ status = "disabled";
+
+ dwc_0: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x08a00000 0 0xcd00>;
+ clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "ref";
+ interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&qusb_phy_0>, <&ssphy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ };
+ };
+
timer@...0000 {
compatible = "arm,armv7-timer-mem";
reg = <0 0xf420000 0 0x1000>;
--
2.34.1
Powered by blists - more mailing lists