[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a837df85-2505-4250-a81e-3683b74d618a@linaro.org>
Date: Wed, 20 Nov 2024 11:59:36 +0100
From: neil.armstrong@...aro.org
To: Cheng Jiang <quic_chejiang@...cinc.com>,
Marcel Holtmann <marcel@...tmann.org>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>, Rob Herring
<robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Balakrishna Godavarthi <quic_bgodavar@...cinc.com>,
Rocky Liao <quic_rjliao@...cinc.com>, quic_zijuhu@...cinc.com
Cc: linux-bluetooth@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
quic_mohamull@...cinc.com
Subject: Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant
properties
On 20/11/2024 10:54, Cheng Jiang wrote:
> Since different products use the same SoC chip, features cannot
> be included in a single patch. Use the qcom,product-variant to
> load the appropriate firmware.
>
> The qcom,product-variant provides product line information, which
> the driver uses to load firmware from different directories.
>
> If it's not defined in dts, the default firmware will be loaded.
>
> Signed-off-by: Cheng Jiang <quic_chejiang@...cinc.com>
> ---
> drivers/bluetooth/btqca.c | 142 +++++++++++++++++++++++++++++-------
> drivers/bluetooth/btqca.h | 11 ++-
> drivers/bluetooth/hci_qca.c | 73 +++++++++---------
> 3 files changed, 164 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index dfbbac92242a..0845e5a60412 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -700,8 +700,79 @@ static int qca_check_bdaddr(struct hci_dev *hdev, const struct qca_fw_config *co
> return 0;
> }
>
> -static void qca_generate_hsp_nvm_name(char *fwname, size_t max_size,
> - struct qca_btsoc_version ver, u8 rom_ver, u16 bid)
> +
> +const char *qca_get_soc_name(enum qca_btsoc_type soc_type)
> +{
> + const char *soc_name = "";
> +
> + switch (soc_type) {
> + case QCA_QCA2066:
> + soc_name = "QCA2066";
> + break;
> +
> + case QCA_QCA6698:
> + soc_name = "QCA6698";
> + break;
> +
> + case QCA_WCN3988:
> + case QCA_WCN3990:
> + case QCA_WCN3991:
> + case QCA_WCN3998:
> + soc_name = "WCN399x";
> + break;
> +
> + case QCA_WCN6750:
> + soc_name = "WCN6750";
> + break;
> +
> + case QCA_WCN6855:
> + soc_name = "WCN6855";
> + break;
> +
> + case QCA_WCN7850:
> + soc_name = "WCN7850";
> + break;
> +
> + default:
> + soc_name = "ROME/QCA6390";
> + }
> +
> + return soc_name;
> +}
> +EXPORT_SYMBOL_GPL(qca_get_soc_name);
> +
> +static void qca_get_firmware_path(enum qca_btsoc_type soc_type, char *fw_path,
> + size_t max_size, enum qca_product_type product_type)
> +{
> + const char *fw_dir = NULL;
> +
> + switch (product_type) {
> + case QCA_MCC:
> + fw_dir = "qca";
> + break;
> + case QCA_CE:
> + fw_dir = "qca/ce";
> + break;
> + case QCA_IOT:
> + fw_dir = "qca/iot";
> + break;
> + case QCA_AUTO:
> + fw_dir = "qca/auto";
> + break;
> + default:
> + fw_dir = "qca";
> + break;
> + }
> +
> + if (product_type == QCA_IOT)
> + snprintf(fw_path, max_size, "%s/%s", fw_dir, qca_get_soc_name(soc_type));
> + else
> + snprintf(fw_path, max_size, "%s", fw_dir);
> +}
> +
> +static void qca_generate_hsp_nvm_name(enum qca_btsoc_type soc_type, char *fwname,
> + size_t max_size, const char *fw_path, struct qca_btsoc_version ver, u8 rom_ver,
> + u16 bid)
> {
> const char *variant;
>
> @@ -712,33 +783,36 @@ static void qca_generate_hsp_nvm_name(char *fwname, size_t max_size,
> variant = "";
>
> if (bid == 0x0)
> - snprintf(fwname, max_size, "qca/hpnv%02x%s.bin", rom_ver, variant);
> + snprintf(fwname, max_size, "%s/hpnv%02x%s.bin", fw_path, rom_ver, variant);
> else
> - snprintf(fwname, max_size, "qca/hpnv%02x%s.%x", rom_ver, variant, bid);
> + snprintf(fwname, max_size, "%s/hpnv%02x%s.%x", fw_path, rom_ver, variant, bid);
> }
>
> -static inline void qca_get_nvm_name_generic(struct qca_fw_config *cfg,
> +static inline void qca_get_nvm_name_generic(struct qca_fw_config *cfg, const char *fw_path,
> const char *stem, u8 rom_ver, u16 bid)
> {
> if (bid == 0x0)
> - snprintf(cfg->fwname, sizeof(cfg->fwname), "qca/%snv%02x.bin", stem, rom_ver);
> + snprintf(cfg->fwname, sizeof(cfg->fwname),
> + "%s/%snv%02x.bin", fw_path, stem, rom_ver);
> else if (bid & 0xff00)
> snprintf(cfg->fwname, sizeof(cfg->fwname),
> - "qca/%snv%02x.b%x", stem, rom_ver, bid);
> + "%s/%snv%02x.b%x", fw_path, stem, rom_ver, bid);
> else
> snprintf(cfg->fwname, sizeof(cfg->fwname),
> - "qca/%snv%02x.b%02x", stem, rom_ver, bid);
> + "%s/%snv%02x.b%02x", fw_path, stem, rom_ver, bid);
> }
>
> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
> - const char *firmware_name)
> + const char *firmware_name, uint32_t product_variant)
> {
> struct qca_fw_config config = {};
> int err;
> u8 rom_ver = 0;
> u32 soc_ver;
> u16 boardid = 0;
> + enum qca_product_type product_type;
> + char fw_path[64] = {0};
>
> bt_dev_dbg(hdev, "QCA setup on UART");
>
> @@ -759,6 +833,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> if (soc_type == QCA_WCN6750)
> qca_send_patch_config_cmd(hdev);
>
> + /* Get the f/w path based on product variant */
> + product_type = (product_variant >> 16) & 0xff;
> + qca_get_firmware_path(soc_type, fw_path, sizeof(fw_path), product_type);
> +
> /* Download rampatch file */
> config.type = TLV_TYPE_PATCH;
> switch (soc_type) {
> @@ -766,19 +844,23 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> case QCA_WCN3991:
> case QCA_WCN3998:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/crbtfw%02x.tlv", rom_ver);
> + "%s/crbtfw%02x.tlv", fw_path, rom_ver);
Changing firmware path will break existing platforms, please don't, or add fallbacks.
> break;
> case QCA_WCN3988:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/apbtfw%02x.tlv", rom_ver);
> + "%s/apbtfw%02x.tlv", fw_path, rom_ver);
> break;
> case QCA_QCA2066:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/hpbtfw%02x.tlv", rom_ver);
> + "%s/hpbtfw%02x.tlv", fw_path, rom_ver);
> break;
> case QCA_QCA6390:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/htbtfw%02x.tlv", rom_ver);
> + "%s/htbtfw%02x.tlv", fw_path, rom_ver);
> + break;
> + case QCA_QCA6698:
> + snprintf(config.fwname, sizeof(config.fwname),
> + "%s/hpbtfw%02x.tlv", fw_path, rom_ver);
> break;
> case QCA_WCN6750:
> /* Choose mbn file by default.If mbn file is not found
> @@ -786,19 +868,19 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> */
> config.type = ELF_TYPE_PATCH;
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/msbtfw%02x.mbn", rom_ver);
> + "%s/msbtfw%02x.mbn", fw_path, rom_ver);
> break;
> case QCA_WCN6855:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/hpbtfw%02x.tlv", rom_ver);
> + "%s/hpbtfw%02x.tlv", fw_path, rom_ver);
> break;
> case QCA_WCN7850:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/hmtbtfw%02x.tlv", rom_ver);
> + "%s/hmtbtfw%02x.tlv", fw_path, rom_ver);
> break;
> default:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/rampatch_%08x.bin", soc_ver);
> + "%s/rampatch_%08x.bin", fw_path, soc_ver);
> }
>
> err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
> @@ -810,7 +892,8 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> /* Give the controller some time to get ready to receive the NVM */
> msleep(10);
>
> - if (soc_type == QCA_QCA2066 || soc_type == QCA_WCN7850)
> + if (soc_type == QCA_QCA2066 || soc_type == QCA_WCN7850 ||
> + soc_type == QCA_QCA6698)
> qca_read_fw_board_id(hdev, &boardid);
>
> /* Download NVM configuration */
> @@ -825,39 +908,40 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> case QCA_WCN3998:
> if (le32_to_cpu(ver.soc_id) == QCA_WCN3991_SOC_ID) {
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/crnv%02xu.bin", rom_ver);
> + "%s/crnv%02xu.bin", fw_path, rom_ver);
> } else {
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/crnv%02x.bin", rom_ver);
> + "%s/crnv%02x.bin", fw_path, rom_ver);
> }
> break;
> case QCA_WCN3988:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/apnv%02x.bin", rom_ver);
> + "%s/apnv%02x.bin", fw_path, rom_ver);
> break;
> case QCA_QCA2066:
> - qca_generate_hsp_nvm_name(config.fwname,
> - sizeof(config.fwname), ver, rom_ver, boardid);
> + case QCA_QCA6698:
> + qca_generate_hsp_nvm_name(soc_type, config.fwname,
> + sizeof(config.fwname), fw_path, ver, rom_ver, boardid);
> break;
> case QCA_QCA6390:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/htnv%02x.bin", rom_ver);
> + "%s/htnv%02x.bin", fw_path, rom_ver);
> break;
> case QCA_WCN6750:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/msnv%02x.bin", rom_ver);
> + "%s/msnv%02x.bin", fw_path, rom_ver);
> break;
> case QCA_WCN6855:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/hpnv%02x.bin", rom_ver);
> + "%s/hpnv%02x.bin", fw_path, rom_ver);
> break;
> case QCA_WCN7850:
> - qca_get_nvm_name_generic(&config, "hmt", rom_ver, boardid);
> + qca_get_nvm_name_generic(&config, "hmt", fw_path, rom_ver, boardid);
> break;
>
> default:
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/nvm_%08x.bin", soc_ver);
> + "%s/nvm_%08x.bin", fw_path, soc_ver);
> }
> }
>
> @@ -871,6 +955,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> case QCA_WCN3991:
> case QCA_QCA2066:
> case QCA_QCA6390:
> + case QCA_QCA6698:
> case QCA_WCN6750:
> case QCA_WCN6855:
> case QCA_WCN7850:
> @@ -909,6 +994,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> case QCA_WCN6750:
> case QCA_WCN6855:
> case QCA_WCN7850:
> + case QCA_QCA6698:
> /* get fw build info */
> err = qca_read_fw_build_info(hdev);
> if (err < 0)
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index bb5207d7a8c7..baa3f979d017 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -151,21 +151,30 @@ enum qca_btsoc_type {
> QCA_WCN3991,
> QCA_QCA2066,
> QCA_QCA6390,
> + QCA_QCA6698,
> QCA_WCN6750,
> QCA_WCN6855,
> QCA_WCN7850,
> };
>
> +enum qca_product_type {
> + QCA_MCC = 0,
> + QCA_CE,
> + QCA_IOT,
> + QCA_AUTO,
> +};
> +
> #if IS_ENABLED(CONFIG_BT_QCA)
>
> int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
> - const char *firmware_name);
> + const char *firmware_name, uint32_t product_variant);
> int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
> enum qca_btsoc_type);
> int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
> +const char *qca_get_soc_name(enum qca_btsoc_type soc_type);
> #else
>
> static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 37129e6cb0eb..69fec890eb8c 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -227,6 +227,7 @@ struct qca_serdev {
> struct qca_power *bt_power;
> u32 init_speed;
> u32 oper_speed;
> + u32 product_variant;
> bool bdaddr_property_broken;
> const char *firmware_name;
> };
> @@ -1361,6 +1362,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
> case QCA_WCN6750:
> case QCA_WCN6855:
> case QCA_WCN7850:
> + case QCA_QCA6698:
> usleep_range(1000, 10000);
> break;
>
> @@ -1447,6 +1449,7 @@ static int qca_check_speeds(struct hci_uart *hu)
> case QCA_WCN6750:
> case QCA_WCN6855:
> case QCA_WCN7850:
> + case QCA_QCA6698:
> if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
> !qca_get_speed(hu, QCA_OPER_SPEED))
> return -EINVAL;
> @@ -1489,6 +1492,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
> case QCA_WCN6750:
> case QCA_WCN6855:
> case QCA_WCN7850:
> + case QCA_QCA6698:
> hci_uart_set_flow_control(hu, true);
> break;
>
> @@ -1523,6 +1527,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
> case QCA_WCN6750:
> case QCA_WCN6855:
> case QCA_WCN7850:
> + case QCA_QCA6698:
> hci_uart_set_flow_control(hu, false);
> break;
>
> @@ -1803,6 +1808,7 @@ static int qca_power_on(struct hci_dev *hdev)
> case QCA_WCN6855:
> case QCA_WCN7850:
> case QCA_QCA6390:
> + case QCA_QCA6698:
> ret = qca_regulator_init(hu);
> break;
>
> @@ -1858,7 +1864,6 @@ static int qca_setup(struct hci_uart *hu)
> int ret;
> struct qca_btsoc_version ver;
> struct qca_serdev *qcadev;
> - const char *soc_name;
>
> ret = qca_check_speeds(hu);
> if (ret)
> @@ -1873,34 +1878,7 @@ static int qca_setup(struct hci_uart *hu)
> */
> set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>
> - switch (soc_type) {
> - case QCA_QCA2066:
> - soc_name = "qca2066";
> - break;
> -
> - case QCA_WCN3988:
> - case QCA_WCN3990:
> - case QCA_WCN3991:
> - case QCA_WCN3998:
> - soc_name = "wcn399x";
> - break;
> -
> - case QCA_WCN6750:
> - soc_name = "wcn6750";
> - break;
> -
> - case QCA_WCN6855:
> - soc_name = "wcn6855";
> - break;
> -
> - case QCA_WCN7850:
> - soc_name = "wcn7850";
> - break;
> -
> - default:
> - soc_name = "ROME/QCA6390";
> - }
> - bt_dev_info(hdev, "setting up %s", soc_name);
> + bt_dev_info(hdev, "setting up %s", qca_get_soc_name(soc_type));
Move this into a new function in a separate patch
>
> qca->memdump_state = QCA_MEMDUMP_IDLE;
>
> @@ -1919,6 +1897,7 @@ static int qca_setup(struct hci_uart *hu)
> case QCA_WCN6750:
> case QCA_WCN6855:
> case QCA_WCN7850:
> + case QCA_QCA6698:
> qcadev = serdev_device_get_drvdata(hu->serdev);
> if (qcadev->bdaddr_property_broken)
> set_bit(HCI_QUIRK_BDADDR_PROPERTY_BROKEN, &hdev->quirks);
> @@ -1952,6 +1931,7 @@ static int qca_setup(struct hci_uart *hu)
> case QCA_WCN6750:
> case QCA_WCN6855:
> case QCA_WCN7850:
> + case QCA_QCA6698:
> break;
>
> default:
> @@ -1963,7 +1943,7 @@ static int qca_setup(struct hci_uart *hu)
>
> /* Setup patch / NVM configurations */
> ret = qca_uart_setup(hdev, qca_baudrate, soc_type, ver,
> - firmware_name);
> + firmware_name, qcadev->product_variant);
Add product variant support separately from adding QCA6698
> if (!ret) {
> clear_bit(QCA_IBS_DISABLED, &qca->flags);
> qca_debugfs_init(hdev);
> @@ -2089,6 +2069,20 @@ static const struct qca_device_data qca_soc_data_qca6390 __maybe_unused = {
> .num_vregs = 0,
> };
>
> +static const struct qca_device_data qca_soc_data_qca6698 __maybe_unused = {
> + .soc_type = QCA_QCA6698,
> + .vregs = (struct qca_vreg []) {
> + { "vddio", 5000 },
> + { "vddbtcxmx", 126000 },
> + { "vddrfacmn", 12500 },
> + { "vddrfa0p8", 102000 },
> + { "vddrfa1p7", 302000 },
> + { "vddrfa1p2", 257000 },
> + },
> + .num_vregs = 6,
> + .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
> +};
> +
> static const struct qca_device_data qca_soc_data_wcn6750 __maybe_unused = {
> .soc_type = QCA_WCN6750,
> .vregs = (struct qca_vreg []) {
> @@ -2165,7 +2159,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
> pwrseq_power_off(power->pwrseq);
> set_bit(QCA_BT_OFF, &qca->flags);
> return;
> - }
> + }
This is cleanup
>
> switch (soc_type) {
> case QCA_WCN3988:
> @@ -2179,6 +2173,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
>
> case QCA_WCN6750:
> case QCA_WCN6855:
> + case QCA_QCA6698:
> gpiod_set_value_cansleep(qcadev->bt_en, 0);
> msleep(100);
> qca_regulator_disable(qcadev);
> @@ -2313,6 +2308,12 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> &qcadev->firmware_name);
> device_property_read_u32(&serdev->dev, "max-speed",
> &qcadev->oper_speed);
> + device_property_read_u32(&serdev->dev, "qcom,product-variant",
> + &qcadev->product_variant);
> +
> + if (qcadev->product_variant != 0)
> + BT_INFO("QC Product Variant: 0x%08x", qcadev->product_variant);
> +
> if (!qcadev->oper_speed)
> BT_DBG("UART will pick default operating speed");
>
> @@ -2333,6 +2334,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> case QCA_WCN6855:
> case QCA_WCN7850:
> case QCA_QCA6390:
> + case QCA_QCA6698:
> qcadev->bt_power = devm_kzalloc(&serdev->dev,
> sizeof(struct qca_power),
> GFP_KERNEL);
> @@ -2346,6 +2348,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> switch (qcadev->btsoc_type) {
> case QCA_WCN6855:
> case QCA_WCN7850:
> + case QCA_QCA6698:
> if (!device_property_present(&serdev->dev, "enable-gpios")) {
> /*
> * Backward compatibility with old DT sources. If the
> @@ -2380,7 +2383,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> GPIOD_OUT_LOW);
> if (IS_ERR(qcadev->bt_en) &&
> (data->soc_type == QCA_WCN6750 ||
> - data->soc_type == QCA_WCN6855)) {
> + data->soc_type == QCA_WCN6855 ||
> + data->soc_type == QCA_QCA6698)) {
> dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
> return PTR_ERR(qcadev->bt_en);
> }
> @@ -2393,7 +2397,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> if (IS_ERR(qcadev->sw_ctrl) &&
> (data->soc_type == QCA_WCN6750 ||
> data->soc_type == QCA_WCN6855 ||
> - data->soc_type == QCA_WCN7850)) {
> + data->soc_type == QCA_WCN7850 ||
> + data->soc_type == QCA_QCA6698)) {
> dev_err(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
> return PTR_ERR(qcadev->sw_ctrl);
> }
> @@ -2475,6 +2480,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
> case QCA_WCN6750:
> case QCA_WCN6855:
> case QCA_WCN7850:
> + case QCA_QCA6698:
> if (power->vregs_on)
> qca_power_shutdown(&qcadev->serdev_hu);
> break;
> @@ -2669,6 +2675,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
> { .compatible = "qcom,qca2066-bt", .data = &qca_soc_data_qca2066},
> { .compatible = "qcom,qca6174-bt" },
> { .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
> + { .compatible = "qcom,qca6698-bt", .data = &qca_soc_data_qca6698},
> { .compatible = "qcom,qca9377-bt" },
> { .compatible = "qcom,wcn3988-bt", .data = &qca_soc_data_wcn3988},
> { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
This patch is too long anf has multiple different changes merged together,
please split into multiple small pieces that can be reviewed easier,
Thanks,
Neil
Powered by blists - more mailing lists