linux-kernel - [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241120105954.9665-1-quic_mukhopad@quicinc.com>
Date: Wed, 20 Nov 2024 16:29:52 +0530
From: Soutrik Mukhopadhyay <quic_mukhopad@...cinc.com>
To: andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org,
        krzk+dt@...nel.org, conor+dt@...nel.org
Cc: Soutrik Mukhopadhyay <quic_mukhopad@...cinc.com>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, quic_riteshk@...cinc.com,
        quic_vproddut@...cinc.com, quic_abhinavk@...cinc.com
Subject: [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform

This series adds the DPTX0 and DPTX1 nodes, as a part of mdss0
on Qualcomm SA8775P SoC. It also enables Display Port on Qualcomm
SA8775P-ride platform.

---
This patch depends on following series:
https://lore.kernel.org/all/20240816-sa8775p-mm-v3-v1-0-77d53c3c0cef@quicinc.com/
https://lore.kernel.org/all/20241019-patchv3_1-v5-0-d2fb72c9a845@quicinc.com/
https://lore.kernel.org/all/20241018070706.28980-1-quic_mukhopad@quicinc.com/

v2: Fixed review comments from Dmitry, Konrad and Bjorn
	- Added a new patchset to separate out the soc and board parts.[Konrad]
	- Patchset 1 now comprises of the soc parts and patchset 2 includes board specific changes.[Bjorn]
	- Patchset 2 enables all the DP ports validated on the sa8775p-ride platform.[Bjorn]
	- Fixed indentation errors in the dtsi file containing the soc information.[Dmitry][Konrad]
	- Updated clocks to be used by respective PHYs.[Dmitry]
	- Added mdss0_dp1 device node.[Dmitry]
	- Updated the names of PHYs using label prefix "mdssM_dpN" for clarity.[Bjorn]
	- Avoided use of referring any label in the board(dts) file in the dtsi(platform) file.[Bjorn]

v3: Fixed review comments from Dmitry and other minor changes to prevent warnings and maintain alignment
	- Added specific DP connector node for each DP port validated in patchset 2.[Dmitry]
	- Updated the reg value to 1 for port 1 under mdss_mdp in patchset 1.
	- Fixed the register address space for mdss0_dp1 and mdss0_dp1_phy in alignment to the 
	  register address space for mdss0_dp0 and mdss0_dp0_phy, in patchset 1.

v4: Fixed review comments from Dmitry
	- Added p1 region to the register set of both mdss_dp0 and mdss_dp1
	  alongside validation of devicetree against DT schema.[Dmitry]

---

Soutrik Mukhopadhyay (2):
  arm64: dts: qcom: sa8775p: add DisplayPort device nodes
  arm64: dts: qcom: sa8775p-ride: Enable Display Port

 arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi |  80 ++++++++
 arch/arm64/boot/dts/qcom/sa8775p.dtsi      | 218 ++++++++++++++++++++-
 2 files changed, 297 insertions(+), 1 deletion(-)

-- 
2.17.1