[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241122023314.1616353-7-quic_ziyuzhan@quicinc.com>
Date: Fri, 22 Nov 2024 10:33:14 +0800
From: Ziyue Zhang <quic_ziyuzhan@...cinc.com>
To: vkoul@...nel.org, kishon@...nel.org, robh+dt@...nel.org,
manivannan.sadhasivam@...aro.org, bhelgaas@...gle.com, kw@...ux.com,
lpieralisi@...nel.org, quic_qianyu@...cinc.com, conor+dt@...nel.org,
neil.armstrong@...aro.org, andersson@...nel.org,
konradybcio@...nel.org
Cc: quic_tsoni@...cinc.com, quic_shashim@...cinc.com,
quic_kaushalk@...cinc.com, quic_tdas@...cinc.com,
quic_tingweiz@...cinc.com, quic_aiquny@...cinc.com, kernel@...cinc.com,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-phy@...ts.infradead.org,
Krishna chaitanya chundru <quic_krichai@...cinc.com>,
Ziyue Zhang <quic_ziyuzhan@...cinc.com>
Subject: [PATCH v2 6/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 platform dts
From: Krishna chaitanya chundru <quic_krichai@...cinc.com>
Add platform configurations in devicetree for PCIe, board related
gpios, PMIC regulators, etc.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@...cinc.com>
---
arch/arm64/boot/dts/qcom/qcs615-ride.dts | 42 ++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index ee6cab3924a6..18f131ae9e07 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -202,6 +202,23 @@ &gcc {
<&sleep_clk>;
};
+&pcie {
+ perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l12a>;
+
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -210,6 +227,31 @@ &rpmhcc {
clocks = <&xo_board_clk>;
};
+&tlmm {
+ pcie_default_state: pcie-default-state {
+ clkreq-pins {
+ pins = "gpio90";
+ function = "pcie_clk_req";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-pins {
+ pins = "gpio101";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wake-pins {
+ pins = "gpio100";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
--
2.34.1
Powered by blists - more mailing lists