[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20241122221650.633981-13-dario.binacchi@amarulasolutions.com>
Date: Fri, 22 Nov 2024 23:15:53 +0100
From: Dario Binacchi <dario.binacchi@...rulasolutions.com>
To: linux-kernel@...r.kernel.org
Cc: linux-amarula@...rulasolutions.com,
Dario Binacchi <dario.binacchi@...rulasolutions.com>,
"Ji-Ze Hong (Peter Hong)" <peter_hong@...tek.com.tw>,
Marc Kleine-Budde <mkl@...gutronix.de>,
Vincent Mailhol <mailhol.vincent@...adoo.fr>,
linux-can@...r.kernel.org
Subject: [PATCH v2 12/12] can: f81604: fix {rx,tx}_errors statistics
The f81604_handle_can_bus_errors() function only incremented the receive
error counter and never the transmit error counter, even if the ECC_DIR
flag reported that an error had occurred during transmission. Increment
the receive/transmit error counter based on the value of the ECC_DIR
flag.
Fixes: 88da17436973 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Dario Binacchi <dario.binacchi@...rulasolutions.com>
---
Changes in v2:
- Fix patches 7 through 12 to ensure that statistics are updated even
if the allocation of skb fails.
- Add five new patches (i. e. 1-5), created during the further analysis
of the code while correcting patches from the v1 series (i. e. 7-12).
- Update statistics even if skb allocation fails
drivers/net/can/usb/f81604.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/usb/f81604.c b/drivers/net/can/usb/f81604.c
index bc0c8903fe77..e0cfa1460b0b 100644
--- a/drivers/net/can/usb/f81604.c
+++ b/drivers/net/can/usb/f81604.c
@@ -526,7 +526,6 @@ static void f81604_handle_can_bus_errors(struct f81604_port_priv *priv,
netdev_dbg(netdev, "bus error interrupt\n");
priv->can.can_stats.bus_error++;
- stats->rx_errors++;
if (skb) {
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
@@ -548,10 +547,15 @@ static void f81604_handle_can_bus_errors(struct f81604_port_priv *priv,
/* set error location */
cf->data[3] = data->ecc & F81604_SJA1000_ECC_SEG;
+ }
- /* Error occurred during transmission? */
- if ((data->ecc & F81604_SJA1000_ECC_DIR) == 0)
+ /* Error occurred during transmission? */
+ if ((data->ecc & F81604_SJA1000_ECC_DIR) == 0) {
+ stats->tx_errors++;
+ if (skb)
cf->data[2] |= CAN_ERR_PROT_TX;
+ } else {
+ stats->rx_errors++;
}
set_bit(F81604_CLEAR_ECC, &priv->clear_flags);
--
2.43.0
Powered by blists - more mailing lists