linux-kernel - Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f9b01690-8940-4f8b-b142-6c2ec4db3e83@kernel.org>
Date: Fri, 22 Nov 2024 08:04:31 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Yuanjie Yang <quic_yuanjiey@...cinc.com>, ulf.hansson@...aro.org,
 robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
 bhupesh.sharma@...aro.org, andersson@...nel.org, konradybcio@...nel.org
Cc: linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
 quic_tingweiz@...cinc.com
Subject: Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2

On 22/11/2024 07:51, Yuanjie Yang wrote:
> Add SDHC1 and SDHC2 support to the QCS615 Ride platform.
> 
> Signed-off-by: Yuanjie Yang <quic_yuanjiey@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs615.dtsi | 198 +++++++++++++++++++++++++++
>  1 file changed, 198 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> index 590beb37f441..37c6ab217c96 100644
> --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> @@ -399,6 +399,65 @@ qfprom: efuse@...000 {
>  			#size-cells = <1>;
>  		};
>  
> +		sdhc_1: mmc@...000 {
> +			compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x0 0x007c4000 0x0 0x1000>,
> +			      <0x0 0x007c5000 0x0 0x1000>;
> +			reg-names = "hc",
> +				    "cqhci";
> +
> +			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq",
> +					  "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> +				 <&gcc GCC_SDCC1_APPS_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>,
> +				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
> +			clock-names = "iface",
> +				      "core",
> +				      "xo",
> +				      "ice";
> +
> +			resets = <&gcc GCC_SDCC1_BCR>;
> +
> +			power-domains = <&rpmhpd RPMHPD_CX>;
> +			operating-points-v2 = <&sdhc1_opp_table>;
> +			iommus = <&apps_smmu 0x02c0 0x0>;
> +			interconnects = <&aggre1_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS
> +					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> +					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> +					 &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ALWAYS>;
> +			interconnect-names = "sdhc-ddr",
> +					     "cpu-sdhc";
> +
> +			bus-width = <8>;
> +			qcom,dll-config = <0x000f642c>;
> +			qcom,ddr-config = <0x80040868>;
> +			supports-cqe;
> +			dma-coherent;
> +			mmc-ddr-1_8v;
> +			mmc-hs200-1_8v;
> +			mmc-hs400-1_8v;
> +			mmc-hs400-enhanced-strobe;

These are properties of memory, not SoC. If the node is disabled, means
memory is not attached to the SoC, right?

> +			status = "disabled";




...

> +
> +		sdhc_2: mmc@...4000 {
> +			compatible = "qcom,qcs615-sdhci","qcom,sdhci-msm-v5";
> +			reg = <0x0 0x08804000 0x0 0x1000>;
> +			reg-names = "hc";
> +
> +			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq",
> +					  "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> +				 <&gcc GCC_SDCC2_APPS_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "iface",
> +				      "core",
> +				      "xo";
> +
> +			power-domains = <&rpmhpd RPMHPD_CX>;
> +			operating-points-v2 = <&sdhc2_opp_table>;
> +			iommus = <&apps_smmu 0x02a0 0x0>;
> +			resets = <&gcc GCC_SDCC2_BCR>;
> +			interconnects = <&aggre1_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
> +					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> +					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> +					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
> +			interconnect-names = "sdhc-ddr",
> +					     "cpu-sdhc";
> +
> +			bus-width = <4>;

Same comments.

> +			qcom,dll-config = <0x0007642c>;
> +			qcom,ddr-config = <0x80040868>;
> +			dma-coherent;
> +			status = "disabled";
> +
> +			sdhc2_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-100000000 {
> +					opp-hz = /bits/ 64 <100000000>;
> +					required-opps = <&rpmhpd_opp_low_svs>;
> +				};
> +
> +				opp-202000000 {
> +					opp-hz = /bits/ 64 <202000000>;
> +					required-opps = <&rpmhpd_opp_nom>;
> +				};
> +			};
>  		};
>  
>  		dc_noc: interconnect@...0000 {


Best regards,
Krzysztof