| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1257f76168ae03dba027bd33e6fca31b8df29c35.1732444746.git.andrea.porta@suse.com>
Date: Sun, 24 Nov 2024 11:51:43 +0100
From: Andrea della Porta <andrea.porta@...e.com>
To: Andrea della Porta <andrea.porta@...e.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczynski <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Linus Walleij <linus.walleij@...aro.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Derek Kiernan <derek.kiernan@....com>,
Dragan Cvetic <dragan.cvetic@....com>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Saravana Kannan <saravanak@...gle.com>,
linux-clk@...r.kernel.org,
devicetree@...r.kernel.org,
linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org,
linux-gpio@...r.kernel.org,
Masahiro Yamada <masahiroy@...nel.org>,
Stefan Wahren <wahrenst@....net>,
Herve Codina <herve.codina@...tlin.com>,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH v4 06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
The RP1 is an MFD supporting a gpio controller and /pinmux/pinctrl.
Add minimum support for the gpio only portion. The driver is in
pinctrl folder since upcoming patches will add the pinmux/pinctrl
support where the gpio part can be seen as an addition.
Signed-off-by: Andrea della Porta <andrea.porta@...e.com>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
---
MAINTAINERS | 1 +
drivers/pinctrl/Kconfig | 11 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-rp1.c | 789 ++++++++++++++++++++++++++++++++++
4 files changed, 802 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-rp1.c
diff --git a/MAINTAINERS b/MAINTAINERS
index dc064cd4b6b5..06277969a522 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19388,6 +19388,7 @@ F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml
F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml
F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
F: drivers/clk/clk-rp1.c
+F: drivers/pinctrl/pinctrl-rp1.c
F: include/dt-bindings/clock/rp1.h
F: include/dt-bindings/misc/rp1.h
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 354536de564b..b56e207dcf82 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -587,6 +587,17 @@ config PINCTRL_MLXBF3
each pin. This driver can also be built as a module called
pinctrl-mlxbf3.
+config PINCTRL_RP1
+ tristate "Pinctrl driver for RP1"
+ depends on MISC_RP1
+ default MISC_RP1
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ help
+ Enable the gpio and pinctrl/mux driver for RaspberryPi RP1
+ multi function device.
+
source "drivers/pinctrl/actions/Kconfig"
source "drivers/pinctrl/aspeed/Kconfig"
source "drivers/pinctrl/bcm/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 97823f52b972..2d714047a1ce 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o
obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o
obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
+obj-$(CONFIG_PINCTRL_RP1) += pinctrl-rp1.o
obj-$(CONFIG_PINCTRL_SCMI) += pinctrl-scmi.o
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o
diff --git a/drivers/pinctrl/pinctrl-rp1.c b/drivers/pinctrl/pinctrl-rp1.c
new file mode 100644
index 000000000000..7f550d4f677d
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-rp1.c
@@ -0,0 +1,789 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Raspberry Pi RP1 GPIO unit
+ *
+ * Copyright (C) 2023 Raspberry Pi Ltd.
+ *
+ * This driver is inspired by:
+ * pinctrl-bcm2835.c, please see original file for copyright information
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MODULE_NAME "pinctrl-rp1"
+#define RP1_NUM_GPIOS 54
+#define RP1_NUM_BANKS 3
+
+#define RP1_INT_EDGE_FALLING BIT(0)
+#define RP1_INT_EDGE_RISING BIT(1)
+#define RP1_INT_LEVEL_LOW BIT(2)
+#define RP1_INT_LEVEL_HIGH BIT(3)
+#define RP1_INT_MASK GENMASK(3, 0)
+#define RP1_INT_EDGE_BOTH (RP1_INT_EDGE_FALLING | \
+ RP1_INT_EDGE_RISING)
+
+#define RP1_FSEL_COUNT 9
+
+#define RP1_FSEL_ALT0 0x00
+#define RP1_FSEL_GPIO 0x05
+#define RP1_FSEL_NONE 0x09
+#define RP1_FSEL_NONE_HW 0x1f
+
+#define RP1_PAD_DRIVE_2MA 0x0
+#define RP1_PAD_DRIVE_4MA 0x1
+#define RP1_PAD_DRIVE_8MA 0x2
+#define RP1_PAD_DRIVE_12MA 0x3
+
+enum {
+ RP1_PUD_OFF = 0,
+ RP1_PUD_DOWN = 1,
+ RP1_PUD_UP = 2,
+};
+
+enum {
+ RP1_DIR_OUTPUT = 0,
+ RP1_DIR_INPUT = 1,
+};
+
+enum {
+ RP1_OUTOVER_PERI = 0,
+ RP1_OUTOVER_INVPERI = 1,
+ RP1_OUTOVER_LOW = 2,
+ RP1_OUTOVER_HIGH = 3,
+};
+
+enum {
+ RP1_OEOVER_PERI = 0,
+ RP1_OEOVER_INVPERI = 1,
+ RP1_OEOVER_DISABLE = 2,
+ RP1_OEOVER_ENABLE = 3,
+};
+
+enum {
+ RP1_INOVER_PERI = 0,
+ RP1_INOVER_INVPERI = 1,
+ RP1_INOVER_LOW = 2,
+ RP1_INOVER_HIGH = 3,
+};
+
+enum {
+ RP1_GPIO_CTRL_IRQRESET_SET = 0,
+ RP1_GPIO_CTRL_INT_CLR = 1,
+ RP1_GPIO_CTRL_INT_SET = 2,
+ RP1_GPIO_CTRL_OEOVER = 3,
+ RP1_GPIO_CTRL_FUNCSEL = 4,
+ RP1_GPIO_CTRL_OUTOVER = 5,
+ RP1_GPIO_CTRL = 6,
+};
+
+enum {
+ RP1_INTE_SET = 0,
+ RP1_INTE_CLR = 1,
+};
+
+enum {
+ RP1_RIO_OUT_SET = 0,
+ RP1_RIO_OUT_CLR = 1,
+ RP1_RIO_OE = 2,
+ RP1_RIO_OE_SET = 3,
+ RP1_RIO_OE_CLR = 4,
+ RP1_RIO_IN = 5,
+};
+
+enum {
+ RP1_PAD_SLEWFAST = 0,
+ RP1_PAD_SCHMITT = 1,
+ RP1_PAD_PULL = 2,
+ RP1_PAD_DRIVE = 3,
+ RP1_PAD_IN_ENABLE = 4,
+ RP1_PAD_OUT_DISABLE = 5,
+};
+
+static const struct reg_field rp1_gpio_fields[] = {
+ [RP1_GPIO_CTRL_IRQRESET_SET] = REG_FIELD(0x2004, 28, 28),
+ [RP1_GPIO_CTRL_INT_CLR] = REG_FIELD(0x3004, 20, 23),
+ [RP1_GPIO_CTRL_INT_SET] = REG_FIELD(0x2004, 20, 23),
+ [RP1_GPIO_CTRL_OEOVER] = REG_FIELD(0x0004, 14, 15),
+ [RP1_GPIO_CTRL_FUNCSEL] = REG_FIELD(0x0004, 0, 4),
+ [RP1_GPIO_CTRL_OUTOVER] = REG_FIELD(0x0004, 12, 13),
+ [RP1_GPIO_CTRL] = REG_FIELD(0x0004, 0, 31),
+};
+
+static const struct reg_field rp1_inte_fields[] = {
+ [RP1_INTE_SET] = REG_FIELD(0x2000, 0, 0),
+ [RP1_INTE_CLR] = REG_FIELD(0x3000, 0, 0),
+};
+
+static const struct reg_field rp1_rio_fields[] = {
+ [RP1_RIO_OUT_SET] = REG_FIELD(0x2000, 0, 0),
+ [RP1_RIO_OUT_CLR] = REG_FIELD(0x3000, 0, 0),
+ [RP1_RIO_OE] = REG_FIELD(0x0004, 0, 0),
+ [RP1_RIO_OE_SET] = REG_FIELD(0x2004, 0, 0),
+ [RP1_RIO_OE_CLR] = REG_FIELD(0x3004, 0, 0),
+ [RP1_RIO_IN] = REG_FIELD(0x0008, 0, 0),
+};
+
+static const struct reg_field rp1_pad_fields[] = {
+ [RP1_PAD_SLEWFAST] = REG_FIELD(0, 0, 0),
+ [RP1_PAD_SCHMITT] = REG_FIELD(0, 1, 1),
+ [RP1_PAD_PULL] = REG_FIELD(0, 2, 3),
+ [RP1_PAD_DRIVE] = REG_FIELD(0, 4, 5),
+ [RP1_PAD_IN_ENABLE] = REG_FIELD(0, 6, 6),
+ [RP1_PAD_OUT_DISABLE] = REG_FIELD(0, 7, 7),
+};
+
+struct rp1_iobank_desc {
+ int min_gpio;
+ int num_gpios;
+ int gpio_offset;
+ int inte_offset;
+ int ints_offset;
+ int rio_offset;
+ int pads_offset;
+};
+
+struct rp1_pin_info {
+ u8 num;
+ u8 bank;
+ u8 offset;
+ u8 fsel;
+ u8 irq_type;
+
+ struct regmap_field *gpio[ARRAY_SIZE(rp1_gpio_fields)];
+ struct regmap_field *rio[ARRAY_SIZE(rp1_rio_fields)];
+ struct regmap_field *inte[ARRAY_SIZE(rp1_inte_fields)];
+ struct regmap_field *pad[ARRAY_SIZE(rp1_pad_fields)];
+};
+
+struct rp1_pinctrl {
+ struct device *dev;
+ void __iomem *gpio_base;
+ void __iomem *rio_base;
+ void __iomem *pads_base;
+ int irq[RP1_NUM_BANKS];
+ struct rp1_pin_info pins[RP1_NUM_GPIOS];
+
+ struct pinctrl_dev *pctl_dev;
+ struct gpio_chip gpio_chip;
+ struct pinctrl_gpio_range gpio_range;
+
+ raw_spinlock_t irq_lock[RP1_NUM_BANKS];
+};
+
+static const struct rp1_iobank_desc rp1_iobanks[RP1_NUM_BANKS] = {
+ /* gpio inte ints rio pads */
+ { 0, 28, 0x0000, 0x011c, 0x0124, 0x0000, 0x0004 },
+ { 28, 6, 0x4000, 0x411c, 0x4124, 0x4000, 0x4004 },
+ { 34, 20, 0x8000, 0x811c, 0x8124, 0x8000, 0x8004 },
+};
+
+static int rp1_pinconf_set(struct rp1_pin_info *pin,
+ unsigned int offset, unsigned long *configs,
+ unsigned int num_configs);
+
+static struct rp1_pin_info *rp1_get_pin(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct rp1_pinctrl *pc = gpiochip_get_data(chip);
+
+ if (pc && offset < RP1_NUM_GPIOS)
+ return &pc->pins[offset];
+ return NULL;
+}
+
+static void rp1_input_enable(struct rp1_pin_info *pin, int value)
+{
+ regmap_field_write(pin->pad[RP1_PAD_IN_ENABLE], !!value);
+}
+
+static void rp1_output_enable(struct rp1_pin_info *pin, int value)
+{
+ regmap_field_write(pin->pad[RP1_PAD_OUT_DISABLE], !value);
+}
+
+static u32 rp1_get_fsel(struct rp1_pin_info *pin)
+{
+ u32 oeover, fsel;
+
+ regmap_field_read(pin->gpio[RP1_GPIO_CTRL_OEOVER], &oeover);
+ regmap_field_read(pin->gpio[RP1_GPIO_CTRL_FUNCSEL], &fsel);
+
+ if (oeover != RP1_OEOVER_PERI || fsel >= RP1_FSEL_COUNT)
+ fsel = RP1_FSEL_NONE;
+
+ return fsel;
+}
+
+static void rp1_set_fsel(struct rp1_pin_info *pin, u32 fsel)
+{
+ if (fsel >= RP1_FSEL_COUNT)
+ fsel = RP1_FSEL_NONE_HW;
+
+ rp1_input_enable(pin, 1);
+ rp1_output_enable(pin, 1);
+
+ if (fsel == RP1_FSEL_NONE) {
+ regmap_field_write(pin->gpio[RP1_GPIO_CTRL_OEOVER], RP1_OEOVER_DISABLE);
+ } else {
+ regmap_field_write(pin->gpio[RP1_GPIO_CTRL_OUTOVER], RP1_OUTOVER_PERI);
+ regmap_field_write(pin->gpio[RP1_GPIO_CTRL_OEOVER], RP1_OEOVER_PERI);
+ }
+
+ regmap_field_write(pin->gpio[RP1_GPIO_CTRL_FUNCSEL], fsel);
+}
+
+static int rp1_get_dir(struct rp1_pin_info *pin)
+{
+ unsigned int val;
+
+ regmap_field_read(pin->rio[RP1_RIO_OE], &val);
+
+ return !val ? RP1_DIR_INPUT : RP1_DIR_OUTPUT;
+}
+
+static void rp1_set_dir(struct rp1_pin_info *pin, bool is_input)
+{
+ int reg = is_input ? RP1_RIO_OE_CLR : RP1_RIO_OE_SET;
+
+ regmap_field_write(pin->rio[reg], 1);
+}
+
+static int rp1_get_value(struct rp1_pin_info *pin)
+{
+ unsigned int val;
+
+ regmap_field_read(pin->rio[RP1_RIO_IN], &val);
+
+ return !!val;
+}
+
+static void rp1_set_value(struct rp1_pin_info *pin, int value)
+{
+ /* Assume the pin is already an output */
+ int reg = value ? RP1_RIO_OUT_SET : RP1_RIO_OUT_CLR;
+
+ regmap_field_write(pin->rio[reg], 1);
+}
+
+static int rp1_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rp1_pin_info *pin = rp1_get_pin(chip, offset);
+ int ret;
+
+ if (!pin)
+ return -EINVAL;
+
+ ret = rp1_get_value(pin);
+
+ return ret;
+}
+
+static void rp1_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+ struct rp1_pin_info *pin = rp1_get_pin(chip, offset);
+
+ if (pin)
+ rp1_set_value(pin, value);
+}
+
+static int rp1_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rp1_pin_info *pin = rp1_get_pin(chip, offset);
+ u32 fsel;
+
+ if (!pin)
+ return -EINVAL;
+
+ fsel = rp1_get_fsel(pin);
+ if (fsel != RP1_FSEL_GPIO)
+ return -EINVAL;
+
+ return (rp1_get_dir(pin) == RP1_DIR_OUTPUT) ?
+ GPIO_LINE_DIRECTION_OUT :
+ GPIO_LINE_DIRECTION_IN;
+}
+
+static int rp1_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rp1_pin_info *pin = rp1_get_pin(chip, offset);
+
+ if (!pin)
+ return -EINVAL;
+ rp1_set_dir(pin, RP1_DIR_INPUT);
+ rp1_set_fsel(pin, RP1_FSEL_GPIO);
+
+ return 0;
+}
+
+static int rp1_gpio_direction_output(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct rp1_pin_info *pin = rp1_get_pin(chip, offset);
+
+ if (!pin)
+ return -EINVAL;
+ rp1_set_value(pin, value);
+ rp1_set_dir(pin, RP1_DIR_OUTPUT);
+ rp1_set_fsel(pin, RP1_FSEL_GPIO);
+
+ return 0;
+}
+
+static int rp1_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+ unsigned long config)
+{
+ struct rp1_pin_info *pin = rp1_get_pin(chip, offset);
+ unsigned long configs[] = { config };
+
+ return rp1_pinconf_set(pin, offset, configs,
+ ARRAY_SIZE(configs));
+}
+
+static const struct gpio_chip rp1_gpio_chip = {
+ .label = MODULE_NAME,
+ .owner = THIS_MODULE,
+ .request = gpiochip_generic_request,
+ .free = gpiochip_generic_free,
+ .direction_input = rp1_gpio_direction_input,
+ .direction_output = rp1_gpio_direction_output,
+ .get_direction = rp1_gpio_get_direction,
+ .get = rp1_gpio_get,
+ .set = rp1_gpio_set,
+ .base = -1,
+ .set_config = rp1_gpio_set_config,
+ .ngpio = RP1_NUM_GPIOS,
+ .can_sleep = false,
+};
+
+static void rp1_gpio_irq_handler(struct irq_desc *desc)
+{
+ struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+ struct irq_chip *host_chip = irq_desc_get_chip(desc);
+ struct rp1_pinctrl *pc = gpiochip_get_data(chip);
+ const struct rp1_iobank_desc *bank;
+ int irq = irq_desc_get_irq(desc);
+ unsigned long ints;
+ int bit_pos;
+
+ if (pc->irq[0] == irq)
+ bank = &rp1_iobanks[0];
+ else if (pc->irq[1] == irq)
+ bank = &rp1_iobanks[1];
+ else
+ bank = &rp1_iobanks[2];
+
+ chained_irq_enter(host_chip, desc);
+
+ ints = readl(pc->gpio_base + bank->ints_offset);
+ for_each_set_bit(bit_pos, &ints, 32) {
+ struct rp1_pin_info *pin = rp1_get_pin(chip, bit_pos);
+
+ regmap_field_write(pin->gpio[RP1_GPIO_CTRL_IRQRESET_SET], 1);
+ generic_handle_irq(irq_linear_revmap(pc->gpio_chip.irq.domain,
+ bank->gpio_offset + bit_pos));
+ }
+
+ chained_irq_exit(host_chip, desc);
+}
+
+static void rp1_gpio_irq_config(struct rp1_pin_info *pin, bool enable)
+{
+ int reg = enable ? RP1_INTE_SET : RP1_INTE_CLR;
+
+ regmap_field_write(pin->inte[reg], 1);
+ if (!enable)
+ /* Clear any latched events */
+ regmap_field_write(pin->gpio[RP1_GPIO_CTRL_IRQRESET_SET], 1);
+}
+
+static void rp1_gpio_irq_enable(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ unsigned int gpio = irqd_to_hwirq(data);
+ struct rp1_pin_info *pin = rp1_get_pin(chip, gpio);
+
+ rp1_gpio_irq_config(pin, true);
+}
+
+static void rp1_gpio_irq_disable(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ unsigned int gpio = irqd_to_hwirq(data);
+ struct rp1_pin_info *pin = rp1_get_pin(chip, gpio);
+
+ rp1_gpio_irq_config(pin, false);
+}
+
+static int rp1_irq_set_type(struct rp1_pin_info *pin, unsigned int type)
+{
+ u32 irq_flags;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ irq_flags = 0;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ irq_flags = RP1_INT_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ irq_flags = RP1_INT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ irq_flags = RP1_INT_EDGE_RISING | RP1_INT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ irq_flags = RP1_INT_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ irq_flags = RP1_INT_LEVEL_LOW;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /* Clear them all */
+ regmap_field_write(pin->gpio[RP1_GPIO_CTRL_INT_CLR], RP1_INT_MASK);
+
+ /* Set those that are needed */
+ regmap_field_write(pin->gpio[RP1_GPIO_CTRL_INT_SET], irq_flags);
+ pin->irq_type = type;
+
+ return 0;
+}
+
+static int rp1_gpio_irq_set_type(struct irq_data *data, unsigned int type)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ unsigned int gpio = irqd_to_hwirq(data);
+ struct rp1_pin_info *pin = rp1_get_pin(chip, gpio);
+ struct rp1_pinctrl *pc = gpiochip_get_data(chip);
+ int bank = pin->bank;
+ unsigned long flags;
+ int ret;
+
+ raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
+
+ ret = rp1_irq_set_type(pin, type);
+ if (!ret) {
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ irq_set_handler_locked(data, handle_edge_irq);
+ else
+ irq_set_handler_locked(data, handle_level_irq);
+ }
+
+ raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+
+ return ret;
+}
+
+static void rp1_gpio_irq_ack(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ unsigned int gpio = irqd_to_hwirq(data);
+ struct rp1_pin_info *pin = rp1_get_pin(chip, gpio);
+
+ /* Clear any latched events */
+ regmap_field_write(pin->gpio[RP1_GPIO_CTRL_IRQRESET_SET], 1);
+}
+
+static struct irq_chip rp1_gpio_irq_chip = {
+ .name = MODULE_NAME,
+ .irq_enable = rp1_gpio_irq_enable,
+ .irq_disable = rp1_gpio_irq_disable,
+ .irq_set_type = rp1_gpio_irq_set_type,
+ .irq_ack = rp1_gpio_irq_ack,
+ .irq_mask = rp1_gpio_irq_disable,
+ .irq_unmask = rp1_gpio_irq_enable,
+ .flags = IRQCHIP_IMMUTABLE,
+};
+
+static void rp1_pull_config_set(struct rp1_pin_info *pin, unsigned int arg)
+{
+ regmap_field_write(pin->pad[RP1_PAD_PULL], arg & 0x3);
+}
+
+static int rp1_pinconf_set(struct rp1_pin_info *pin, unsigned int offset,
+ unsigned long *configs, unsigned int num_configs)
+{
+ u32 param, arg;
+ int i;
+
+ if (!pin)
+ return -EINVAL;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ rp1_pull_config_set(pin, RP1_PUD_OFF);
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ rp1_pull_config_set(pin, RP1_PUD_DOWN);
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_UP:
+ rp1_pull_config_set(pin, RP1_PUD_UP);
+ break;
+
+ case PIN_CONFIG_INPUT_ENABLE:
+ rp1_input_enable(pin, arg);
+ break;
+
+ case PIN_CONFIG_OUTPUT_ENABLE:
+ rp1_output_enable(pin, arg);
+ break;
+
+ case PIN_CONFIG_OUTPUT:
+ rp1_set_value(pin, arg);
+ rp1_set_dir(pin, RP1_DIR_OUTPUT);
+ rp1_set_fsel(pin, RP1_FSEL_GPIO);
+ break;
+
+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+ regmap_field_write(pin->pad[RP1_PAD_SCHMITT], !!arg);
+ break;
+
+ case PIN_CONFIG_SLEW_RATE:
+ regmap_field_write(pin->pad[RP1_PAD_SLEWFAST], !!arg);
+ break;
+
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ switch (arg) {
+ case 2:
+ arg = RP1_PAD_DRIVE_2MA;
+ break;
+ case 4:
+ arg = RP1_PAD_DRIVE_4MA;
+ break;
+ case 8:
+ arg = RP1_PAD_DRIVE_8MA;
+ break;
+ case 12:
+ arg = RP1_PAD_DRIVE_12MA;
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+ regmap_field_write(pin->pad[RP1_PAD_DRIVE], arg);
+ break;
+
+ default:
+ return -ENOTSUPP;
+
+ } /* switch param type */
+ } /* for each config */
+
+ return 0;
+}
+
+static const struct of_device_id rp1_pinctrl_match[] = {
+ { .compatible = "raspberrypi,rp1-gpio" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rp1_pinctrl_match);
+
+static struct rp1_pinctrl rp1_pinctrl_data = {};
+
+static const struct regmap_config rp1_pinctrl_regmap_cfg = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .fast_io = true,
+ .name = "rp1-pinctrl",
+};
+
+static int rp1_gen_regfield(struct device *dev,
+ const struct reg_field *array,
+ size_t array_size,
+ int reg_off,
+ int pin_off,
+ bool additive_offset,
+ struct regmap *regmap,
+ struct regmap_field *out[])
+{
+ struct reg_field regfield;
+ int k;
+
+ for (k = 0; k < array_size; k++) {
+ regfield = array[k];
+ regfield.reg = (additive_offset ? regfield.reg : 0) + reg_off;
+ if (pin_off >= 0) {
+ regfield.lsb = pin_off;
+ regfield.msb = regfield.lsb;
+ }
+ out[k] = devm_regmap_field_alloc(dev, regmap, regfield);
+
+ if (IS_ERR(out[k]))
+ return PTR_ERR(out[k]);
+ }
+
+ return 0;
+}
+
+static int rp1_pinctrl_probe(struct platform_device *pdev)
+{
+ struct regmap *gpio_regmap, *rio_regmap, *pads_regmap;
+ struct rp1_pinctrl *pc = &rp1_pinctrl_data;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct gpio_irq_chip *girq;
+ int err, i;
+
+ pc->dev = dev;
+ pc->gpio_chip = rp1_gpio_chip;
+ pc->gpio_chip.parent = dev;
+
+ pc->gpio_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pc->gpio_base))
+ return dev_err_probe(dev, PTR_ERR(pc->gpio_base), "could not get GPIO IO memory\n");
+
+ pc->rio_base = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(pc->rio_base))
+ return dev_err_probe(dev, PTR_ERR(pc->rio_base), "could not get RIO IO memory\n");
+
+ pc->pads_base = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(pc->pads_base))
+ return dev_err_probe(dev, PTR_ERR(pc->pads_base), "could not get PADS IO memory\n");
+
+ gpio_regmap = devm_regmap_init_mmio(dev, pc->gpio_base,
+ &rp1_pinctrl_regmap_cfg);
+ if (IS_ERR(gpio_regmap))
+ return dev_err_probe(dev, PTR_ERR(gpio_regmap), "could not init GPIO regmap\n");
+
+ rio_regmap = devm_regmap_init_mmio(dev, pc->rio_base,
+ &rp1_pinctrl_regmap_cfg);
+ if (IS_ERR(rio_regmap))
+ return dev_err_probe(dev, PTR_ERR(rio_regmap), "could not init RIO regmap\n");
+
+ pads_regmap = devm_regmap_init_mmio(dev, pc->pads_base,
+ &rp1_pinctrl_regmap_cfg);
+ if (IS_ERR(pads_regmap))
+ return dev_err_probe(dev, PTR_ERR(pads_regmap), "could not init PADS regmap\n");
+
+ for (i = 0; i < RP1_NUM_BANKS; i++) {
+ const struct rp1_iobank_desc *bank = &rp1_iobanks[i];
+ int j;
+
+ for (j = 0; j < bank->num_gpios; j++) {
+ struct rp1_pin_info *pin =
+ &pc->pins[bank->min_gpio + j];
+ int reg_off;
+
+ pin->num = bank->min_gpio + j;
+ pin->bank = i;
+ pin->offset = j;
+
+ reg_off = bank->gpio_offset + pin->offset
+ * sizeof(u32) * 2;
+ err = rp1_gen_regfield(dev,
+ rp1_gpio_fields,
+ ARRAY_SIZE(rp1_gpio_fields),
+ reg_off,
+ -1,
+ true,
+ gpio_regmap,
+ pin->gpio);
+
+ if (err)
+ return dev_err_probe(dev, err,
+ "Unable to allocate regmap for gpio\n");
+
+ reg_off = bank->inte_offset;
+ err = rp1_gen_regfield(dev,
+ rp1_inte_fields,
+ ARRAY_SIZE(rp1_inte_fields),
+ reg_off,
+ pin->offset,
+ true,
+ gpio_regmap,
+ pin->inte);
+
+ if (err)
+ return dev_err_probe(dev, err,
+ "Unable to allocate regmap for inte\n");
+
+ reg_off = bank->rio_offset;
+ err = rp1_gen_regfield(dev,
+ rp1_rio_fields,
+ ARRAY_SIZE(rp1_rio_fields),
+ reg_off,
+ pin->offset,
+ true,
+ rio_regmap,
+ pin->rio);
+
+ if (err)
+ return dev_err_probe(dev, err,
+ "Unable to allocate regmap for rio\n");
+
+ reg_off = bank->pads_offset + pin->offset * sizeof(u32);
+ err = rp1_gen_regfield(dev,
+ rp1_pad_fields,
+ ARRAY_SIZE(rp1_pad_fields),
+ reg_off,
+ -1,
+ false,
+ pads_regmap,
+ pin->pad);
+
+ if (err)
+ return dev_err_probe(dev, err,
+ "Unable to allocate regmap for pad\n");
+ }
+
+ raw_spin_lock_init(&pc->irq_lock[i]);
+ }
+
+ girq = &pc->gpio_chip.irq;
+ girq->chip = &rp1_gpio_irq_chip;
+ girq->parent_handler = rp1_gpio_irq_handler;
+ girq->num_parents = RP1_NUM_BANKS;
+ girq->parents = pc->irq;
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_level_irq;
+
+ /*
+ * Use the same handler for all groups: this is necessary
+ * since we use one gpiochip to cover all lines - the
+ * irq handler then needs to figure out which group and
+ * bank that was firing the IRQ and look up the per-group
+ * and bank data.
+ */
+ for (i = 0; i < RP1_NUM_BANKS; i++) {
+ pc->irq[i] = irq_of_parse_and_map(np, i);
+ if (!pc->irq[i]) {
+ girq->num_parents = i;
+ break;
+ }
+ }
+
+ platform_set_drvdata(pdev, pc);
+
+ err = devm_gpiochip_add_data(dev, &pc->gpio_chip, pc);
+ if (err)
+ return dev_err_probe(dev, err, "could not add GPIO chip\n");
+
+ return 0;
+}
+
+static struct platform_driver rp1_pinctrl_driver = {
+ .probe = rp1_pinctrl_probe,
+ .driver = {
+ .name = MODULE_NAME,
+ .of_match_table = rp1_pinctrl_match,
+ .suppress_bind_attrs = true,
+ },
+};
+module_platform_driver(rp1_pinctrl_driver);
+
+MODULE_AUTHOR("Phil Elwell <phil@...pberrypi.com>");
+MODULE_AUTHOR("Andrea della Porta <andrea.porta@...e.com>");
+MODULE_DESCRIPTION("RP1 pinctrl/gpio driver");
+MODULE_LICENSE("GPL");
--
2.35.3
Powered by blists - more mailing lists