[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87fe9d5c88da7e2fd8315615578bd5b97f50e1b3.1732444746.git.andrea.porta@suse.com>
Date: Sun, 24 Nov 2024 11:51:44 +0100
From: Andrea della Porta <andrea.porta@...e.com>
To: Andrea della Porta <andrea.porta@...e.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczynski <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Linus Walleij <linus.walleij@...aro.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Derek Kiernan <derek.kiernan@....com>,
Dragan Cvetic <dragan.cvetic@....com>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Saravana Kannan <saravanak@...gle.com>,
linux-clk@...r.kernel.org,
devicetree@...r.kernel.org,
linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org,
linux-gpio@...r.kernel.org,
Masahiro Yamada <masahiroy@...nel.org>,
Stefan Wahren <wahrenst@....net>,
Herve Codina <herve.codina@...tlin.com>,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH v4 07/10] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
RaspberryPi RP1 is a multi function PCI endpoint device that
exposes several subperipherals via PCI BAR.
Add a dtb overlay that will be compiled into a binary blob
and linked in the RP1 driver.
This overlay offers just minimal support to represent the
RP1 device itself, the sub-peripherals will be added by
future patches.
Signed-off-by: Andrea della Porta <andrea.porta@...e.com>
---
NOTE: this patch should be taken by the same maintainer that will take
"[PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver", since they
are closely related in terms of compiling.
MAINTAINERS | 1 +
arch/arm64/boot/dts/broadcom/rp1.dtso | 58 +++++++++++++++++++++++++++
2 files changed, 59 insertions(+)
create mode 100644 arch/arm64/boot/dts/broadcom/rp1.dtso
diff --git a/MAINTAINERS b/MAINTAINERS
index 06277969a522..510a071ede78 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19383,6 +19383,7 @@ F: include/uapi/linux/media/raspberrypi/
RASPBERRY PI RP1 PCI DRIVER
M: Andrea della Porta <andrea.porta@...e.com>
S: Maintained
+F: arch/arm64/boot/dts/broadcom/rp1.dtso
F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml
F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml
diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso
new file mode 100644
index 000000000000..cdff061e2750
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1.dtso
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target-path="";
+ __overlay__ {
+ compatible = "pci1de4,1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ pci_ep_bus: pci-ep-bus@1 {
+ compatible = "simple-bus";
+ ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>;
+ dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rp1_clocks: clocks@...18000 {
+ compatible = "raspberrypi,rp1-clocks";
+ reg = <0x00 0x40018000 0x0 0x10038>;
+ #clock-cells = <1>;
+ clocks = <&clk_rp1_xosc>;
+ assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
+ <&rp1_clocks RP1_PLL_SYS>,
+ <&rp1_clocks RP1_PLL_SYS_SEC>,
+ <&rp1_clocks RP1_CLK_SYS>;
+ assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
+ <200000000>, // RP1_PLL_SYS
+ <125000000>, // RP1_PLL_SYS_SEC
+ <200000000>; // RP1_CLK_SYS
+ };
+
+ rp1_gpio: pinctrl@...d0000 {
+ compatible = "raspberrypi,rp1-gpio";
+ reg = <0x00 0x400d0000 0x0 0xc000>,
+ <0x00 0x400e0000 0x0 0xc000>,
+ <0x00 0x400f0000 0x0 0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+};
--
2.35.3
Powered by blists - more mailing lists