[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <72258a57-6c65-4885-af00-0f18f27239e8@oss.nxp.com>
Date: Fri, 29 Nov 2024 17:20:31 +0200
From: Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>
To: Marc Kleine-Budde <mkl@...gutronix.de>
Cc: Vincent Mailhol <mailhol.vincent@...adoo.fr>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, linux-can@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
NXP S32 Linux <s32@....com>, imx@...ts.linux.dev,
Christophe Lizzi <clizzi@...hat.com>, Alberto Ruiz <aruizrui@...hat.com>,
Enric Balletbo <eballetb@...hat.com>
Subject: Re: [PATCH v3 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC
support
On 11/29/2024 4:37 PM, Marc Kleine-Budde wrote:
> On 29.11.2024 16:25:33, Ciprian Costea wrote:
>> From: Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>
>>
>> Add S32G2/S32G3 SoCs compatible strings.
>>
>> A particularity for these SoCs is the presence of separate interrupts for
>> state change, bus errors, MBs 0-7 and MBs 8-127 respectively.
>>
>> Increase maxItems of 'interrupts' to 4 for S32G based SoCs and keep the
>> same restriction for other SoCs.
>>
>> Also, as part of this commit, move the 'allOf' after the required
>> properties to make the documentation easier to read.
>>
>> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>
>> ---
>> .../bindings/net/can/fsl,flexcan.yaml | 46 +++++++++++++++++--
>> 1 file changed, 42 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
>> index 97dd1a7c5ed2..10b658e85ef2 100644
>> --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
>> +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
>> @@ -10,9 +10,6 @@ title:
>> maintainers:
>> - Marc Kleine-Budde <mkl@...gutronix.de>
>>
>> -allOf:
>> - - $ref: can-controller.yaml#
>> -
>> properties:
>> compatible:
>> oneOf:
>> @@ -28,6 +25,7 @@ properties:
>> - fsl,vf610-flexcan
>> - fsl,ls1021ar2-flexcan
>> - fsl,lx2160ar1-flexcan
>> + - nxp,s32g2-flexcan
>> - items:
>> - enum:
>> - fsl,imx53-flexcan
>> @@ -43,12 +41,21 @@ properties:
>> - enum:
>> - fsl,ls1028ar1-flexcan
>> - const: fsl,lx2160ar1-flexcan
>> + - items:
>> + - enum:
>> + - nxp,s32g3-flexcan
>> + - const: nxp,s32g2-flexcan
>>
>> reg:
>> maxItems: 1
>>
>> interrupts:
>> - maxItems: 1
>> + minItems: 1
>> + maxItems: 4
>> +
>> + interrupt-names:
>> + minItems: 1
>> + maxItems: 4
>>
>> clocks:
>> maxItems: 2
>> @@ -136,6 +143,37 @@ required:
>> - reg
>> - interrupts
>>
>> +allOf:
>> + - $ref: can-controller.yaml#
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: nxp,s32g2-flexcan
>> + then:
>> + properties:
>> + interrupts:
>> + items:
>> + - description: Message Buffer interrupt for mailboxes 0-7 and Enhanced RX FIFO
>> + - description: Device state change
>> + - description: Error detection
>> + - description: Message Buffer interrupt for mailboxes 8-127
>> + interrupt-names:
>> + items:
>> + - const: mb-0
>> + - const: state
>> + - const: berr
>
> Nitpick:
>
> - description: Error detection
> and
> - const: err
>
> or
>
> - description: Bus Error detection
> and
> - const: berr
>
> regards,
> Marc
>
Hello Marc,
Good point. I will change irq description to 'Bus Error detection' in V4.
Best Regards,
Ciprian
>> + - const: mb-1
>> + required:
>> + - compatible
>> + - reg
>> + - interrupts
>> + - interrupt-names
>> + else:
>> + properties:
>> + interrupts:
>> + maxItems: 1
>> +
>> additionalProperties: false
>>
>> examples:
>> --
>> 2.45.2
>>
>>
>
Powered by blists - more mailing lists