[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <pzkijkdswskaq6232uldapz3b6v6zplif7uah24iwq3ymlezft@skbcy2vod3c5>
Date: Thu, 5 Dec 2024 00:59:19 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Janaki Ramaiah Thota <quic_janathot@...cinc.com>
Cc: Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Marcel Holtmann <marcel@...tmann.org>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>, Bartosz Golaszewski <brgl@...ev.pl>, quic_mohamull@...cinc.com,
quic_hbandi@...cinc.com, quic_anubhavg@...cinc.com,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>, linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-bluetooth@...r.kernel.org, linux-pm@...r.kernel.org
Subject: Re: [PATCH v4 2/4] arm64: dts: qcom: qcs6490-rb3gen: add and enable
BT node
On Wed, Dec 04, 2024 at 06:47:04PM +0530, Janaki Ramaiah Thota wrote:
> Add a node for the PMU module of the WCN6750 present on the
> qcs6490-rb3gen board and assign its power outputs to the Bluetooth
> module.
>
> Signed-off-by: Janaki Ramaiah Thota <quic_janathot@...cinc.com>
> ---
> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 165 ++++++++++++++++++-
> 1 file changed, 164 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index 27695bd54220..07650648214e 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: BSD-3-Clause
> /*
> - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> /dts-v1/;
> @@ -33,6 +33,7 @@
>
> aliases {
> serial0 = &uart5;
> + serial1 = &uart7;
> };
>
> chosen {
> @@ -217,6 +218,63 @@
> regulator-min-microvolt = <3700000>;
> regulator-max-microvolt = <3700000>;
> };
> +
> + wcn6750-pmu {
> + compatible = "qcom,wcn6750-pmu";
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_en>;
> + vddaon-supply = <&vreg_s7b_0p972>;
> + vddasd-supply = <&vreg_l11c_2p8>;
> + vddpmu-supply = <&vreg_s7b_0p972>;
> + vddrfa0p8-supply = <&vreg_s7b_0p972>;
> + vddrfa1p2-supply = <&vreg_s8b_1p272>;
> + vddrfa1p7-supply = <&vreg_s1b_1p872>;
> + vddrfa2p2-supply = <&vreg_s1c_2p19>;
> +
> + bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
Doesn't WCN6750 also have SW_CTRL and wifi-enable pins?
> +
--
With best wishes
Dmitry
Powered by blists - more mailing lists