[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <c32efa4a-287f-4ae4-bb3d-74b6e595dfc6@enneenne.com>
Date: Wed, 4 Dec 2024 12:00:09 +0100
From: Rodolfo Giometti <giometti@...eenne.com>
To: Bastien Curutchet <bastien.curutchet@...tlin.com>
Cc: linux-kernel@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>, herve.codina@...tlin.com,
christophercordahi@...ometrics.ca,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Andrew Morton <akpm@...ux-foundation.org>
Subject: Re: [PATCH v3 1/1] pps: clients: gpio: Bypass edge's direction check
when not needed
On 04/12/24 11:34, Bastien Curutchet wrote:
> Hi Rodolfo,
>
> I revive this topic.
>
> On 6/26/24 4:16 PM, Rodolfo Giometti wrote:
>> On 26/06/24 14:55, Bastien Curutchet wrote:
>>> Hi Rodolfo
>>>
>>> On 4/25/24 14:42, Rodolfo Giometti wrote:
>>>> On 25/04/24 14:28, Bastien Curutchet wrote:
>>>>> In the IRQ handler, the GPIO's state is read to verify the direction of
>>>>> the edge that triggered the interruption before generating the PPS event.
>>>>> If a pulse is too short, the GPIO line can reach back its original state
>>>>> before this verification and the PPS event is lost.
>>>>>
>>>>> This check is needed when info->capture_clear is set because it needs
>>>>> interruptions on both rising and falling edges. When info- >capture_clear
>>>>> is not set, interruption is triggered by one edge only so this check can
>>>>> be omitted.
>>>>>
>>>>> Add a warning if irq_handler is left without triggering any PPS event.
>>>>> Bypass the edge's direction verification when info->capture_clear is not
>>>>> set.
>>>>>
>>>>> Signed-off-by: Bastien Curutchet <bastien.curutchet@...tlin.com>
>>>>
>>>> Acked-by: Rodolfo Giometti <giometti@...eenne.com>
>>>>
>>>
>>> I don't think I've received any updates since you acked this. Is there
>>> something missing before the patch can be applied?
>>
>> No updates. It can be applied.
>>
>
> In the MAINTAINER file, you are listed as the sole maintainer for the PPS
> subsystem. Could you let me know if there's someone else in charge of applying
> patches so I can gently ping them please ?
>
> I checked, the patch still applies to v6.13-rc1
I was quite sure to have acked and then forwarded this patch to Greg and Andrew
for the inclusion.
If not (I'm sorry), please resend the patch, and I'm going to pass it to Greg
and Andrew right away.
Ciao,
Rodolfo
--
GNU/Linux Solutions e-mail: giometti@...eenne.com
Linux Device Driver giometti@...ux.it
Embedded Systems phone: +39 349 2432127
UNIX programming
Powered by blists - more mailing lists