linux-kernel - Re: [PATCH v4 06/10] dt-bindings: iio: accel: add interrupt-names

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <r23e4axzdjn423yl44lv2sjprywtjymvgramrrfoc2lv6ebeui@hzbm4ilbyvhw>
Date: Thu, 5 Dec 2024 09:55:40 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Lothar Rubusch <l.rubusch@...il.com>
Cc: lars@...afoo.de, Michael.Hennerich@...log.com, jic23@...nel.org, 
	robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org, 
	devicetree@...r.kernel.org, linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org, 
	eraretuya@...il.com
Subject: Re: [PATCH v4 06/10] dt-bindings: iio: accel: add interrupt-names

On Wed, Dec 04, 2024 at 06:24:47PM +0000, Lothar Rubusch wrote:
> Add interrupt-names INT1 and INT2 for the two interrupt lines of the
> sensor. Only one line will be connected for incoming events. The driver
> needs to be configured accordingly. If no interrupt line is set up, the
> sensor will still measure, but no events are possible.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@...il.com>
> ---
>  .../devicetree/bindings/iio/accel/adi,adxl345.yaml    | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index 280ed479ef5..a4c2cefe1a4 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -37,6 +37,15 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  interrupt-names:
> +    description: Use either INT1 or INT2 for events, or ignore events.
> +    minItems: 1
> +    maxItems: 2

No improvements, no responses and according to commit msg you have only
one item, so instead above and below just:

description: .........
items:
 - enum: [ int1, int2]


Best regards,
Krzysztof