linux-kernel - Re: [PATCH v5 0/2] Enable ethernet for qcs8300

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87c9ebb9-36b2-4891-8800-2896d6d9bbfc@quicinc.com>
Date: Fri, 6 Dec 2024 10:37:25 +0800
From: Tingwei Zhang <quic_tingweiz@...cinc.com>
To: Yijie Yang <quic_yijiyang@...cinc.com>,
        Bjorn Andersson
	<andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring
	<robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
	<conor+dt@...nel.org>,
        Richard Cochran <richardcochran@...il.com>
CC: <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
        Konrad Dybcio
	<konrad.dybcio@....qualcomm.com>
Subject: Re: [PATCH v5 0/2] Enable ethernet for qcs8300

On 12/6/2024 9:35 AM, Yijie Yang wrote:
> Add dts nodes to enable ethernet interface on qcs8300-ride.
> The EMAC, SerDes and EPHY version are the same as those in sa8775p.
> 
> Signed-off-by: Yijie Yang <quic_yijiyang@...cinc.com>
> ---
> This patch series depends on below patch series:
> https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@quicinc.com/ - Reviewed

Above series was already applied. I would say there's no dependency to 
block this series to be applied now. No need to respin for this but 
update the dependency status if a new version is required.

> https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@quicinc.com/ - Applied
> 
> Changes in v5:
> - Pad the register with zero for both 'ethernet0' and 'serdes0'.
> - Change PHY name from 'sgmii_phy0' to 'phy0'.
> - Link to v4: https://lore.kernel.org/r/20241123-dts_qcs8300-v4-0-b10b8ac634a9@quicinc.com
> 
> ---
> Yijie Yang (2):
>        arm64: dts: qcom: qcs8300: add the first 2.5G ethernet
>        arm64: dts: qcom: qcs8300-ride: enable ethernet0
> 
>   arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 112 ++++++++++++++++++++++++++++++
>   arch/arm64/boot/dts/qcom/qcs8300.dtsi     |  43 ++++++++++++
>   2 files changed, 155 insertions(+)
> ---
> base-commit: c83f0b825741bcb9d8a7be67c63f6b9045d30f5a
> change-id: 20241111-dts_qcs8300-f8383ef0f5ef
> 
> Best regards,


-- 
Thanks,
Tingwei