linux-kernel - Re: [PATCH v5 0/2] Enable ethernet for qcs8300

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4ebf9f1d-74a9-451b-91a5-fe38a0d48e24@quicinc.com>
Date: Fri, 6 Dec 2024 10:50:08 +0800
From: Yijie Yang <quic_yijiyang@...cinc.com>
To: Tingwei Zhang <quic_tingweiz@...cinc.com>,
        Bjorn Andersson
	<andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring
	<robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
	<conor+dt@...nel.org>,
        Richard Cochran <richardcochran@...il.com>
CC: <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
        Konrad Dybcio
	<konrad.dybcio@....qualcomm.com>
Subject: Re: [PATCH v5 0/2] Enable ethernet for qcs8300



On 2024-12-06 10:37, Tingwei Zhang wrote:
> On 12/6/2024 9:35 AM, Yijie Yang wrote:
>> Add dts nodes to enable ethernet interface on qcs8300-ride.
>> The EMAC, SerDes and EPHY version are the same as those in sa8775p.
>>
>> Signed-off-by: Yijie Yang <quic_yijiyang@...cinc.com>
>> ---
>> This patch series depends on below patch series:
>> https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi- 
>> v2-0-494c40fa2a42@...cinc.com/ - Reviewed
> 
> Above series was already applied. I would say there's no dependency to 
> block this series to be applied now. No need to respin for this but 
> update the dependency status if a new version is required.
> 

I will take care of it next time.

>> https://lore.kernel.org/all/20241010-schema- 
>> v1-0-98b2d0a2f7a2@...cinc.com/ - Applied
>>
>> Changes in v5:
>> - Pad the register with zero for both 'ethernet0' and 'serdes0'.
>> - Change PHY name from 'sgmii_phy0' to 'phy0'.
>> - Link to v4: https://lore.kernel.org/r/20241123-dts_qcs8300-v4-0- 
>> b10b8ac634a9@...cinc.com
>>
>> ---
>> Yijie Yang (2):
>>        arm64: dts: qcom: qcs8300: add the first 2.5G ethernet
>>        arm64: dts: qcom: qcs8300-ride: enable ethernet0
>>
>>   arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 112 ++++++++++++++++++++ 
>> ++++++++++
>>   arch/arm64/boot/dts/qcom/qcs8300.dtsi     |  43 ++++++++++++
>>   2 files changed, 155 insertions(+)
>> ---
>> base-commit: c83f0b825741bcb9d8a7be67c63f6b9045d30f5a
>> change-id: 20241111-dts_qcs8300-f8383ef0f5ef
>>
>> Best regards,
> 
> 

-- 
Best Regards,
Yijie