[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <222b6e5b-d673-b57c-43b9-a80b37d28d2d@quicinc.com>
Date: Mon, 9 Dec 2024 17:05:05 +0530
From: Mohammad Rafi Shaik <quic_mohs@...cinc.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
CC: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Liam Girdwood
<lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>, Vinod Koul <vkoul@...nel.org>,
Bard Liao
<yung-chuan.liao@...ux.intel.com>,
Jaroslav Kysela <perex@...ex.cz>, "Takashi
Iwai" <tiwai@...e.com>,
Pierre-Louis Bossart
<pierre-louis.bossart@...ux.dev>,
Sanyog Kale <sanyog.r.kale@...el.com>, <linux-arm-msm@...r.kernel.org>,
<linux-sound@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <quic_pkumpatl@...cinc.com>,
<kernel@...cinc.com>
Subject: Re: [PATCH v4 1/4] ASoC: dt-bindings: wcd937x-sdw: Add static channel
mapping support
On 12/9/2024 1:19 PM, Krzysztof Kozlowski wrote:
> On Mon, Dec 09, 2024 at 10:25:48AM +0530, Mohammad Rafi Shaik wrote:
>> Add static channel mapping between master and slave rx/tx ports for
>> Qualcomm wcd937x soundwire codec.
>>
>> Currently, the channel map index value for each soundwire port is
>> hardcoded in the wcd937x-sdw driver, and the same channel map index
>> value is configured in the soundwire master.
>>
>> The Qualcomm board like the QCM6490-IDP require static channel map
>> settings for the soundwire master and slave ports.
>>
>> If another boards which are using enable wcd937x, the channel mapping
>> index values between master and slave may be different depending on the
>> board hw design and requirements. If the above properties are not used
>> in a SoC specific device tree, the channel mapping index values are set
>> to default.
>>
>> With the introduction of the following channel mapping properties, it is
>> now possible to configure the master channel mapping directly from the
>> device tree.
>>
>> The qcom,tx-channel-mapping property specifies the static channel mapping
>> between the slave and master tx ports in the order of slave port channels
>> which is adc1, adc2, adc3, adc4, dmic0, dmic1, mbhc, dmic2, dmic3, dmci4,
>> dmic5, dmic6, dmic7.
>>
>> The qcom,rx-channel-mapping property specifies the static channel mapping
>> between the slave and master rx ports in the order of slave port channels
>> which is hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l.
>>
>> Signed-off-by: Mohammad Rafi Shaik <quic_mohs@...cinc.com>
>> ---
>> .../bindings/sound/qcom,wcd937x-sdw.yaml | 36 +++++++++++++++++++
>> 1 file changed, 36 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
>> index d3cf8f59cb23..9209667044ba 100644
>> --- a/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
>> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
>> @@ -58,6 +58,40 @@ properties:
>> items:
>> enum: [1, 2, 3, 4, 5]
>>
>> + qcom,tx-channel-mapping:
>> + description: |
>> + Specifies static channel mapping between slave and master tx port
>> + channels.
>> + In the order of slave port channels which is adc1, adc2, adc3,
>> + dmic0, dmic1, mbhc, dmic2, dmic3, dmci4, dmic5, dmic6, dmic7.
>> + $ref: /schemas/types.yaml#/definitions/uint8-array
>> + minItems: 12
>> + maxItems: 12
>> + additionalItems: false
>> + items:
>> + enum:
>> + - 0 # WCD9370_SWRM_CH1
>
> Drop the comments. This does not implement my feedback and you sent it
> four days after I replied to you.
>
ACK
Somehow, I missed the comments in the last email.
I will address them and will update in next version.
Thanks & Regards,
Rafi.
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists