linux-kernel - [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241211-drm-dp-msm-add-lttpr-transparent-mode-set-v2-1-d5906ed38b28@linaro.org>
Date: Wed, 11 Dec 2024 15:04:12 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, 
 Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, 
 David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>, 
 Karol Herbst <kherbst@...hat.com>, Lyude Paul <lyude@...hat.com>, 
 Danilo Krummrich <dakr@...hat.com>, 
 Jani Nikula <jani.nikula@...ux.intel.com>, 
 Rodrigo Vivi <rodrigo.vivi@...el.com>, 
 Joonas Lahtinen <joonas.lahtinen@...ux.intel.com>, 
 Tvrtko Ursulin <tursulin@...ulin.net>, Rob Clark <robdclark@...il.com>, 
 Abhinav Kumar <quic_abhinavk@...cinc.com>, 
 Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, Sean Paul <sean@...rly.run>, 
 Marijn Suijten <marijn.suijten@...ainline.org>
Cc: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>, Johan Hovold <johan@...nel.org>, 
 dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org, 
 nouveau@...ts.freedesktop.org, intel-gfx@...ts.freedesktop.org, 
 intel-xe@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org, 
 freedreno@...ts.freedesktop.org, Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent
 mode

According to the DisplayPort standard, LTTPRs have two operating
modes:
 - non-transparent - it replies to DPCD LTTPR field specific AUX
   requests, while passes through all other AUX requests
 - transparent - it passes through all AUX requests.

Switching between this two modes is done by the DPTX by issuing
an AUX write to the DPCD PHY_REPEATER_MODE register.

Add a generic helper that allows switching between these modes.

Also add a generic wrapper for the helper that handles the explicit
disabling of non-transparent mode and its disable->enable sequence
mentioned in the DP Standard v2.0 section 3.6.6.1. Do this in order
to move this handling out of the vendor specific driver implementation
into the generic framework.

Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
 drivers/gpu/drm/display/drm_dp_helper.c | 50 +++++++++++++++++++++++++++++++++
 include/drm/display/drm_dp_helper.h     |  2 ++
 2 files changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
index da3c8521a7fa7d3c9761377363cdd4b44ab1106e..6abc54cd28e93d8101358ce05be51d4516778451 100644
--- a/drivers/gpu/drm/display/drm_dp_helper.c
+++ b/drivers/gpu/drm/display/drm_dp_helper.c
@@ -2817,6 +2817,56 @@ int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE])
 }
 EXPORT_SYMBOL(drm_dp_lttpr_max_link_rate);
 
+/**
+ * drm_dp_lttpr_set_transparent_mode - set the LTTPR in transparent mode
+ * @aux: DisplayPort AUX channel
+ * @enable: Enable or disable transparent mode
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_lttpr_set_transparent_mode(struct drm_dp_aux *aux, bool enable)
+{
+	u8 val = enable ? DP_PHY_REPEATER_MODE_TRANSPARENT :
+			  DP_PHY_REPEATER_MODE_NON_TRANSPARENT;
+	int ret = drm_dp_dpcd_writeb(aux, DP_PHY_REPEATER_MODE, val);
+
+	return ret == 1 ? 0 : ret;
+}
+EXPORT_SYMBOL(drm_dp_lttpr_set_transparent_mode);
+
+/**
+ * drm_dp_lttpr_init - init LTTPR transparency mode according to DP standard
+ *
+ * @aux: DisplayPort AUX channel
+ * @lttpr_count: Number of LTTPRs
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_lttpr_init(struct drm_dp_aux *aux, int lttpr_count)
+{
+	if (!lttpr_count)
+		return 0;
+
+	/*
+	 * See DP Standard v2.0 3.6.6.1 about the explicit disabling of
+	 * non-transparent mode and the disable->enable non-transparent mode
+	 * sequence.
+	 */
+	drm_dp_lttpr_set_transparent_mode(aux, true);
+
+	if (lttpr_count > 0 && !drm_dp_lttpr_set_transparent_mode(aux, false))
+		return 0;
+
+	/*
+	 * Roll-back to tranparent mode if setting non-tranparent mode failed or
+	 * the number of LTTPRs is invalid
+	 */
+	drm_dp_lttpr_set_transparent_mode(aux, true);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(drm_dp_lttpr_init);
+
 /**
  * drm_dp_lttpr_max_lane_count - get the maximum lane count supported by all LTTPRs
  * @caps: LTTPR common capabilities
diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
index 8f4054a560396a43750570a8c2e95624039ab8ad..3311df3b58255cf0620391d0948ccf6b569a8a34 100644
--- a/include/drm/display/drm_dp_helper.h
+++ b/include/drm/display/drm_dp_helper.h
@@ -630,6 +630,8 @@ int drm_dp_read_lttpr_phy_caps(struct drm_dp_aux *aux,
 			       u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
 int drm_dp_lttpr_count(const u8 cap[DP_LTTPR_COMMON_CAP_SIZE]);
 int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]);
+int drm_dp_lttpr_set_transparent_mode(struct drm_dp_aux *aux, bool enable);
+int drm_dp_lttpr_init(struct drm_dp_aux *aux, int lttpr_count);
 int drm_dp_lttpr_max_lane_count(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]);
 bool drm_dp_lttpr_voltage_swing_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
 bool drm_dp_lttpr_pre_emphasis_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);

-- 
2.34.1