linux-kernel - [PATCH v2 2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241211-drm-dp-msm-add-lttpr-transparent-mode-set-v2-2-d5906ed38b28@linaro.org>
Date: Wed, 11 Dec 2024 15:04:13 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, 
 Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, 
 David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>, 
 Karol Herbst <kherbst@...hat.com>, Lyude Paul <lyude@...hat.com>, 
 Danilo Krummrich <dakr@...hat.com>, 
 Jani Nikula <jani.nikula@...ux.intel.com>, 
 Rodrigo Vivi <rodrigo.vivi@...el.com>, 
 Joonas Lahtinen <joonas.lahtinen@...ux.intel.com>, 
 Tvrtko Ursulin <tursulin@...ulin.net>, Rob Clark <robdclark@...il.com>, 
 Abhinav Kumar <quic_abhinavk@...cinc.com>, 
 Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, Sean Paul <sean@...rly.run>, 
 Marijn Suijten <marijn.suijten@...ainline.org>
Cc: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>, Johan Hovold <johan@...nel.org>, 
 dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org, 
 nouveau@...ts.freedesktop.org, intel-gfx@...ts.freedesktop.org, 
 intel-xe@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org, 
 freedreno@...ts.freedesktop.org, Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH v2 2/4] drm/nouveau/dp: Use the generic helper to control
 LTTPR transparent mode

LTTPRs operating modes are defined by the DisplayPort standard and the
generic framework now provides a helper to switch between them, which
is handling the explicit disabling of non-transparent mode and its
disable->enable sequence mentioned in the DP Standard v2.0 section
3.6.6.1.

So use the new drm generic helper instead as it makes the code a bit
cleaner.

Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
 drivers/gpu/drm/nouveau/nouveau_dp.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c
index bcda0105160f1450df855281e0d932606a5095dd..55691ec44abaa53c84e73358e33df1949bb1e35c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dp.c
@@ -79,21 +79,8 @@ nouveau_dp_probe_dpcd(struct nouveau_connector *nv_connector,
 	    !drm_dp_read_lttpr_common_caps(aux, dpcd, outp->dp.lttpr.caps)) {
 		int nr = drm_dp_lttpr_count(outp->dp.lttpr.caps);
 
-		if (nr) {
-			drm_dp_dpcd_writeb(aux, DP_PHY_REPEATER_MODE,
-						DP_PHY_REPEATER_MODE_TRANSPARENT);
-
-			if (nr > 0) {
-				ret = drm_dp_dpcd_writeb(aux, DP_PHY_REPEATER_MODE,
-							      DP_PHY_REPEATER_MODE_NON_TRANSPARENT);
-				if (ret != 1) {
-					drm_dp_dpcd_writeb(aux, DP_PHY_REPEATER_MODE,
-								DP_PHY_REPEATER_MODE_TRANSPARENT);
-				} else {
-					outp->dp.lttpr.nr = nr;
-				}
-			}
-		}
+		if (!drm_dp_lttpr_init(aux, nr))
+			outp->dp.lttpr.nr = nr;
 	}
 
 	ret = drm_dp_read_dpcd_caps(aux, dpcd);

-- 
2.34.1