| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Z1yH7BFbYuJ++Vd1@lizhi-Precision-Tower-5810>
Date: Fri, 13 Dec 2024 14:15:56 -0500
From: Frank Li <Frank.li@....com>
To: Ciprian Costea <ciprianmarian.costea@....nxp.com>
Cc: Chester Lin <chester62515@...il.com>,
Matthias Brugger <mbrugger@...e.com>,
Ghennadi Procopciuc <ghennadi.procopciuc@....nxp.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
linux-arm-kernel@...ts.infradead.org, imx@...ts.linux.dev,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
NXP S32 Linux <s32@....com>, Christophe Lizzi <clizzi@...hat.com>,
Alberto Ruiz <aruizrui@...hat.com>,
Enric Balletbo <eballetb@...hat.com>
Subject: Re: [PATCH v2] arm64: dts: s32g: add I2C support
On Fri, Dec 13, 2024 at 04:22:50PM +0200, Ciprian Costea wrote:
> From: Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>
>
> Add the I2C Devicetree nodes and pinmux for S32G2 and S32G3 SoCs.
>
> With respect to S32G2/S32G3 SoC based boards, there are multiple RDB
> (rdb2 vs rdb3) and EVB (for G2 vs for G3) board revisions. These versions
> are quite similar. The common part for the EVB revisions will be
> centralized in 's32gxxa-evb.dtsi' file, while the RDB commonalities will
> be placed in 's32gxxa-rdb.dtsi' file.
>
> This refactor will also serve for other modules in the future, such as
> FlexCAN, DSPI.
>
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>
> ---
Change log here!
> arch/arm64/boot/dts/freescale/s32g2.dtsi | 45 ++++++
> .../arm64/boot/dts/freescale/s32g274a-evb.dts | 1 +
Shawn require board dts should be seperate patch
> .../boot/dts/freescale/s32g274a-rdb2.dts | 1 +
> arch/arm64/boot/dts/freescale/s32g3.dtsi | 50 ++++++
> .../boot/dts/freescale/s32g399a-rdb3.dts | 9 ++
> .../boot/dts/freescale/s32gxxxa-evb.dtsi | 150 ++++++++++++++++++
> .../boot/dts/freescale/s32gxxxa-rdb.dtsi | 126 +++++++++++++++
> 7 files changed, 382 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> index 7be430b78c83..0e6c847ab0c3 100644
> --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
> +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> @@ -333,6 +333,33 @@ uart1: serial@...cc000 {
> status = "disabled";
> };
>
> + i2c0: i2c@...e4000 {
> + compatible = "nxp,s32g2-i2c";
> + reg = <0x401e4000 0x1000>;
> + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 40>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + i2c1: i2c@...e8000 {
> + compatible = "nxp,s32g2-i2c";
> + reg = <0x401e8000 0x1000>;
> + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 40>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + i2c2: i2c@...ec000 {
> + compatible = "nxp,s32g2-i2c";
> + reg = <0x401ec000 0x1000>;
> + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 40>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> uart2: serial@...bc000 {
> compatible = "nxp,s32g2-linflexuart",
> "fsl,s32v234-linflexuart";
> @@ -341,6 +368,24 @@ uart2: serial@...bc000 {
> status = "disabled";
> };
>
> + i2c3: i2c@...d8000 {
> + compatible = "nxp,s32g2-i2c";
> + reg = <0x402d8000 0x1000>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 40>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + i2c4: i2c@...dc000 {
> + compatible = "nxp,s32g2-i2c";
> + reg = <0x402dc000 0x1000>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 40>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> usdhc0: mmc@...f0000 {
> compatible = "nxp,s32g2-usdhc";
> reg = <0x402f0000 0x1000>;
> diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
> index b9a119eea2b7..c4a195dd67bf 100644
> --- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
> +++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
> @@ -7,6 +7,7 @@
> /dts-v1/;
>
> #include "s32g2.dtsi"
> +#include "s32gxxxa-evb.dtsi"
>
> / {
> model = "NXP S32G2 Evaluation Board (S32G-VNP-EVB)";
> diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> index aaa61a8ad0da..b5ba51696f43 100644
> --- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> +++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> @@ -7,6 +7,7 @@
> /dts-v1/;
>
> #include "s32g2.dtsi"
> +#include "s32gxxxa-rdb.dtsi"
>
> / {
> model = "NXP S32G2 Reference Design Board 2 (S32G-VNP-RDB2)";
> diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> index 6c572ffe37ca..666e4029e588 100644
> --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
> +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> @@ -390,6 +390,36 @@ uart1: serial@...cc000 {
> status = "disabled";
> };
>
> + i2c0: i2c@...e4000 {
> + compatible = "nxp,s32g3-i2c",
> + "nxp,s32g2-i2c";
> + reg = <0x401e4000 0x1000>;
> + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 40>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + i2c1: i2c@...e8000 {
> + compatible = "nxp,s32g3-i2c",
> + "nxp,s32g2-i2c";
> + reg = <0x401e8000 0x1000>;
> + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 40>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + i2c2: i2c@...ec000 {
> + compatible = "nxp,s32g3-i2c",
> + "nxp,s32g2-i2c";
> + reg = <0x401ec000 0x1000>;
> + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 40>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> uart2: serial@...bc000 {
> compatible = "nxp,s32g3-linflexuart",
> "fsl,s32v234-linflexuart";
> @@ -398,6 +428,26 @@ uart2: serial@...bc000 {
> status = "disabled";
> };
>
> + i2c3: i2c@...d8000 {
> + compatible = "nxp,s32g3-i2c",
> + "nxp,s32g2-i2c";
> + reg = <0x402d8000 0x1000>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 40>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + i2c4: i2c@...dc000 {
> + compatible = "nxp,s32g3-i2c",
> + "nxp,s32g2-i2c";
> + reg = <0x402dc000 0x1000>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 40>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> usdhc0: mmc@...f0000 {
> compatible = "nxp,s32g3-usdhc",
> "nxp,s32g2-usdhc";
> diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> index 828e353455b5..5f8739c068c6 100644
> --- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> +++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> @@ -8,6 +8,7 @@
> /dts-v1/;
>
> #include "s32g3.dtsi"
> +#include "s32gxxxa-rdb.dtsi"
>
> / {
> model = "NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)";
> @@ -39,6 +40,14 @@ &uart1 {
> status = "okay";
> };
>
> +&i2c4 {
> + ina231@40 {
> + compatible = "ti,ina231";
> + reg = <0x40>;
> + shunt-resistor = <1000>;
> + };
> +};
> +
> &usdhc0 {
> pinctrl-names = "default", "state_100mhz", "state_200mhz";
> pinctrl-0 = <&pinctrl_usdhc0>;
> diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi
> new file mode 100644
> index 000000000000..a44eff28073a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi
> @@ -0,0 +1,150 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright 2024 NXP
> + *
> + * Authors: Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>
> + * Ghennadi Procopciuc <ghennadi.procopciuc@....nxp.com>
> + * Larisa Grigore <larisa.grigore@....com>
> + */
> +
> +&pinctrl {
> + i2c0_pins: i2c0-pins {
> + i2c0-grp0 {
> + pinmux = <0x101>, <0x111>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c0-grp1 {
> + pinmux = <0x2352>, <0x2362>;
> + };
> + };
> +
> + i2c0_gpio_pins: i2c0-gpio-pins {
> + i2c0-gpio-grp0 {
> + pinmux = <0x100>, <0x110>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c0-gpio-grp1 {
> + pinmux = <0x2350>, <0x2360>;
> + };
> + };
> +
> + i2c1_pins: i2c1-pins {
> + i2c1-grp0 {
> + pinmux = <0x131>, <0x141>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c1-grp1 {
> + pinmux = <0x2cd2>, <0x2ce2>;
> + };
> + };
> +
> + i2c1_gpio_pins: i2c1-gpio-pins {
> + i2c1-gpio-grp0 {
> + pinmux = <0x130>, <0x140>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c1-gpio-grp1 {
> + pinmux = <0x2cd0>, <0x2ce0>;
> + };
> + };
> +
> + i2c2_pins: i2c2-pins {
> + i2c2-grp0 {
> + pinmux = <0x151>, <0x161>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c2-grp1 {
> + pinmux = <0x2cf2>, <0x2d02>;
> + };
> + };
> +
> + i2c2_gpio_pins: i2c2-gpio-pins {
> + i2c2-gpio-grp0 {
> + pinmux = <0x150>, <0x160>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c2-gpio-grp1 {
> + pinmux = <0x2cf0>, <0x2d00>;
> + };
> + };
> +
> + i2c4_pins: i2c4-pins {
> + i2c4-grp0 {
> + pinmux = <0x211>, <0x222>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c4-grp1 {
> + pinmux = <0x2d43>, <0x2d33>;
> + };
> + };
> +
> + i2c4_gpio_pins: i2c4-gpio-pins {
> + i2c4-gpio-grp0 {
> + pinmux = <0x210>, <0x220>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c4-gpio-grp1 {
> + pinmux = <0x2d40>, <0x2d30>;
> + };
> + };
> +};
> +
> +&i2c0 {
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&i2c0_pins>;
> + pinctrl-1 = <&i2c0_gpio_pins>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&i2c1_pins>;
> + pinctrl-1 = <&i2c1_gpio_pins>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&i2c2_pins>;
> + pinctrl-1 = <&i2c2_gpio_pins>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&i2c4_pins>;
> + pinctrl-1 = <&i2c4_gpio_pins>;
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
> new file mode 100644
> index 000000000000..50fe6aaa1605
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright 2024 NXP
> + *
> + * Authors: Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>
> + * Ghennadi Procopciuc <ghennadi.procopciuc@....nxp.com>
> + * Larisa Grigore <larisa.grigore@....com>
> + */
> +
> +&pinctrl {
> + i2c0_pins: i2c0-pins {
> + i2c0-grp0 {
> + pinmux = <0x1f2>, <0x201>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c0-grp1 {
> + pinmux = <0x2353>, <0x2363>;
> + };
> + };
> +
> + i2c0_gpio_pins: i2c0-gpio-pins {
> + i2c0-gpio-grp0 {
> + pinmux = <0x1f0>, <0x200>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c0-gpio-grp1 {
> + pinmux = <0x2350>, <0x2360>;
> + };
> + };
> +
> + i2c2_pins: i2c2-pins {
> + i2c2-grp0 {
> + pinmux = <0x151>, <0x161>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c2-grp1 {
> + pinmux = <0x2cf2>, <0x2d02>;
> + };
> + };
> +
> + i2c2_gpio_pins: i2c2-gpio-pins {
> + i2c2-gpio-grp0 {
> + pinmux = <0x2cf0>, <0x2d00>;
> + };
> +
> + i2c2-gpio-grp1 {
> + pinmux = <0x150>, <0x160>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> + };
> +
> + i2c4_pins: i2c4-pins {
> + i2c4-grp0 {
> + pinmux = <0x211>, <0x222>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c4-grp1 {
> + pinmux = <0x2d43>, <0x2d33>;
> + };
> + };
> +
> + i2c4_gpio_pins: i2c4-gpio-pins {
> + i2c4-gpio-grp0 {
> + pinmux = <0x210>, <0x220>;
> + drive-open-drain;
> + output-enable;
> + input-enable;
> + slew-rate = <133>;
> + };
> +
> + i2c4-gpio-grp1 {
> + pinmux = <0x2d40>, <0x2d30>;
> + };
> + };
> +};
> +
> +&i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
I remember I have said "#address-cells" and "#size-cells" should be in
dtsi to avoid copy it at each board dts file.
Frank
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&i2c0_pins>;
> + pinctrl-1 = <&i2c0_gpio_pins>;
> + status = "okay";
> +
> + pcal6524: gpio-expander@22 {
> + compatible = "nxp,pcal6524";
> + reg = <0x22>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&i2c2_pins>;
> + pinctrl-1 = <&i2c2_gpio_pins>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&i2c4_pins>;
> + pinctrl-1 = <&i2c4_gpio_pins>;
> + status = "okay";
> +};
> --
> 2.45.2
>
Powered by blists - more mailing lists