linux-kernel - [PATCH v3] leds: pwm-multicolor: Disable PWM when going to suspend

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241213191039.181169-3-jakob+lkml@paranoidlabs.org>
Date: Fri, 13 Dec 2024 20:10:41 +0100
From: Jakob Riepler <jakob+lkml@...anoidlabs.org>
To: Pavel Machek <pavel@....cz>,
	Lee Jones <lee@...nel.org>
Cc: linux-leds@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Uwe Kleine-König <uwe@...ine-koenig.org>,
	Jakob Riepler <jakob+lkml@...anoidlabs.org>,
	Jakob Riepler <jakob+lkml@...osfield.at>
Subject: [PATCH v3] leds: pwm-multicolor: Disable PWM when going to suspend

This fixes suspend on platforms like stm32mp1xx, where the PWM consumer
has to be disabled for the PWM to enter suspend.
Another positive side effect is that active-low LEDs now properly
turn off instead of going back to full brightness when they are set to 0.

Link: https://lore.kernel.org/all/20240417153846.271751-2-u.kleine-koenig@pengutronix.de/
Signed-off-by: Jakob Riepler <jakob+lkml@...osfield.at>
---
Changes in v2:
 - fix wrong line-breaks in patch
Changes in v3:
 - use git send-email

Sorry for the issues.
I'm using git send-email with a different mailserver now so the patch
formatting should now be correct - at least in my tests git am was
happy now.

Best regards
Jakob

 drivers/leds/rgb/leds-pwm-multicolor.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/rgb/leds-pwm-multicolor.c b/drivers/leds/rgb/leds-pwm-multicolor.c
index e1a81e0109e8..f80a06cc31f8 100644
--- a/drivers/leds/rgb/leds-pwm-multicolor.c
+++ b/drivers/leds/rgb/leds-pwm-multicolor.c
@@ -50,7 +50,13 @@ static int led_pwm_mc_set(struct led_classdev *cdev,
 			duty = priv->leds[i].state.period - duty;
 
 		priv->leds[i].state.duty_cycle = duty;
-		priv->leds[i].state.enabled = duty > 0;
+		/*
+		 * Disabling a PWM doesn't guarantee that it emits the inactive level.
+		 * So keep it on. Only for suspending the PWM should be disabled because
+		 * otherwise it refuses to suspend. The possible downside is that the
+		 * LED might stay (or even go) on.
+		 */
+		priv->leds[i].state.enabled = !(cdev->flags & LED_SUSPENDED);
 		ret = pwm_apply_might_sleep(priv->leds[i].pwm,
 					    &priv->leds[i].state);
 		if (ret)
-- 
2.47.1