lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <70119ce4-6d58-40f6-9851-679cf597fe73@kernel.org>
Date: Sat, 14 Dec 2024 11:11:26 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Vincenzo Frascino <vincenzo.frascino@....com>,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Sudeep Holla <sudeep.holla@....com>, Rob Herring <robh@...nel.org>
Subject: Re: [PATCH 3/8] arm64: dts: morello: Add support for common
 functionalities

On 13/12/2024 17:32, Vincenzo Frascino wrote:
> The Morello architecture is an experimental extension to Armv8.2-A,
> which extends the AArch64 state with the principles proposed in
> version 7 of the Capability Hardware Enhanced RISC Instructions
> (CHERI) ISA.
> 
> The Morello Platform (soc) and the Fixed Virtual Platfom (fvp) share
> some functionalities that have conveniently been included in
> morello.dtsi to avoid duplication.
> 
> Introduce morello.dtsi.
> 
> Note: Morello fvp will be introduced with a future patch series.
> 
> Cc: Sudeep Holla <sudeep.holla@....com>
> Cc: Rob Herring <robh@...nel.org>
> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@....com>
> ---
>  arch/arm64/boot/dts/arm/morello.dtsi | 112 +++++++++++++++++++++++++++
>  1 file changed, 112 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/arm/morello.dtsi
> 
> diff --git a/arch/arm64/boot/dts/arm/morello.dtsi b/arch/arm64/boot/dts/arm/morello.dtsi
> new file mode 100644
> index 000000000000..9d84a0840c5b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/arm/morello.dtsi
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2020-2024, Arm Limited. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "arm,morello";
> +
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &soc_uart0;
> +	};
> +
> +	gic: interrupt-controller@...10000 {
> +		compatible = "arm,gic-v3";
> +		#address-cells = <2>;
> +		#interrupt-cells = <3>;
> +		#size-cells = <2>;
> +		ranges;
> +		interrupt-controller;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	spe-pmu {
> +		compatible = "arm,statistical-profiling-extension-v1";
> +		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
> +	mailbox: mhu@...00000 {


You cannot have MMIO nodes outside of soc.

> +		compatible = "arm,mhu-doorbell", "arm,primecell";
> +		reg = <0x0 0x45000000 0x0 0x1000>;
> +		interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "mhu-lpri-rx",
> +				  "mhu-hpri-rx";
> +		#mbox-cells = <2>;
> +		mbox-name = "ARM-MHU";
> +		clocks = <&soc_refclk50mhz>;
> +		clock-names = "apb_pclk";
> +	};
> +
> +	sram: sram@...00000 {
> +		compatible = "mmio-sram";
> +		reg = <0x0 0x06000000 0x0 0x8000>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0x0 0x06000000 0x8000>;
> +
> +		cpu_scp_hpri0: scp-sram@0 {
> +			compatible = "arm,scmi-shmem";
> +			reg = <0x0 0x80>;
> +		};
> +
> +		cpu_scp_hpri1: scp-sram@80 {
> +			compatible = "arm,scmi-shmem";
> +			reg = <0x80 0x80>;
> +		};
> +	};
> +
> +	soc_refclk50mhz: refclk50mhz {

Please use name for all fixed clocks which matches current format
recommendation: 'clock-<freq>' (see also the pattern in the binding for
any other options).

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/clock/fixed-clock.yaml?h=v6.11-rc1

> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +		clock-output-names = "apb_pclk";
> +	};
> +
> +	soc_refclk85mhz: refclk85mhz {

Please use name for all fixed clocks which matches current format
recommendation: 'clock-<freq>' (see also the pattern in the binding for
any other options).

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/clock/fixed-clock.yaml?h=v6.11-rc1


> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <85000000>;
> +		clock-output-names = "iofpga:aclk";
> +	};
> +
> +	soc_uartclk:  uartclk {


Only one space.

Please use name for all fixed clocks which matches current format
recommendation: 'clock-<freq>' (see also the pattern in the binding for
any other options).

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/clock/fixed-clock.yaml?h=v6.11-rc1

> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +		clock-output-names = "uartclk";
> +	};
> +
> +	soc_uart0: serial@...00000 {
> +		compatible = "arm,pl011", "arm,primecell";
> +		reg = <0x0 0x2a400000 0x0 0x1000>;
> +		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&soc_uartclk>, <&soc_refclk50mhz>;
> +		clock-names = "uartclk", "apb_pclk";
> +		status = "okay";

Why do you need it? Did you disable it?

> +	};
> +};


Best regards,
Krzysztof

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ