linux-kernel - [PATCH] ARM: dts: amlogic: meson: remove size and address cells from USB nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241226220352.965505-1-martin.blumenstingl@googlemail.com>
Date: Thu, 26 Dec 2024 23:03:52 +0100
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: linux-amlogic@...ts.infradead.org
Cc: linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org,
	neil.armstrong@...aro.org,
	Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH] ARM: dts: amlogic: meson: remove size and address cells from USB nodes

The only board that actually requires these properties is
meson8b-odroidc1.dts but that already sets it on it's own. Drop these
properties from meson.dtsi because otherwise they can cause dtc
warnings:
  /soc/usb@...40000: unnecessary #address-cells/#size-cells without
  "ranges", "dma-ranges" or child "reg" property

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
 arch/arm/boot/dts/amlogic/meson.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/amlogic/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi
index 8cb0fc78b2af..28ec2c821cdc 100644
--- a/arch/arm/boot/dts/amlogic/meson.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson.dtsi
@@ -255,8 +255,6 @@ rtc: rtc@740 {
 
 		usb0: usb@...40000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc9040000 0x40000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb0_phy>;
@@ -270,8 +268,6 @@ usb0: usb@...40000 {
 
 		usb1: usb@...c0000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc90c0000 0x40000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb1_phy>;
-- 
2.47.1