linux-kernel - Re: [PATCH v2 05/10] ARM: dts: aspeed: system1: Add RGMII support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <8ae7c237-abcf-4079-a4ba-ce17e401917d@lunn.ch>
Date: Thu, 9 Jan 2025 15:48:09 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Ninad Palsule <ninad@...ux.ibm.com>
Cc: Jacky Chou <jacky_chou@...eedtech.com>,
	"andrew+netdev@...n.ch" <andrew+netdev@...n.ch>,
	"andrew@...econstruct.com.au" <andrew@...econstruct.com.au>,
	"conor+dt@...nel.org" <conor+dt@...nel.org>,
	"davem@...emloft.net" <davem@...emloft.net>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"eajames@...ux.ibm.com" <eajames@...ux.ibm.com>,
	"edumazet@...gle.com" <edumazet@...gle.com>,
	"joel@....id.au" <joel@....id.au>,
	"krzk+dt@...nel.org" <krzk+dt@...nel.org>,
	"kuba@...nel.org" <kuba@...nel.org>,
	"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>,
	"linux-aspeed@...ts.ozlabs.org" <linux-aspeed@...ts.ozlabs.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"minyard@....org" <minyard@....org>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"openipmi-developer@...ts.sourceforge.net" <openipmi-developer@...ts.sourceforge.net>,
	"pabeni@...hat.com" <pabeni@...hat.com>,
	"ratbert@...aday-tech.com" <ratbert@...aday-tech.com>,
	"robh@...nel.org" <robh@...nel.org>
Subject: Re: [PATCH v2 05/10] ARM: dts: aspeed: system1: Add RGMII support

> When does someone use rgmii-txid and rgmii-rxid?

When there is an extra long RX clock line on the PCB, but not the TX
clock line, you would use rgmii-txid. If there is an extra long TX
clock line, but not RX clock, you would use rgmii-rxid. You do not see
this very often, but it does exist:

arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts

/* RGMII delays added via PCB traces */
&enet2 {
        phy-mode = "rgmii";
        status = "okay";

	Andrew