[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <36471228-4383-4b01-bbe2-0ec490617f6c@tuxon.dev>
Date: Thu, 9 Jan 2025 11:09:48 +0200
From: Claudiu Beznea <claudiu.beznea@...on.dev>
To: Ryan.Wanner@...rochip.com, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, nicolas.ferre@...rochip.com,
alexandre.belloni@...tlin.com, mturquette@...libre.com, sboyd@...nel.org,
arnd@...db.de
Cc: dharma.b@...rochip.com, mihai.sain@...rochip.com,
romain.sioen@...rochip.com, varshini.rajendran@...rochip.com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-mmc@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-spi@...r.kernel.org, linux-serial@...r.kernel.org
Subject: Re: [PATCH v5 3/5] dt-bindings: pinctrl: at91-pio4: add
microchip,sama7d65-pinctrl
Hi, Ryan,
On 07.01.2025 18:07, Ryan.Wanner@...rochip.com wrote:
> From: Dharma Balasubiramani <dharma.b@...rochip.com>
>
> Add pinctrl bindings for microchip sama7d65 SoC.
>
> Signed-off-by: Dharma Balasubiramani <dharma.b@...rochip.com>
> Signed-off-by: Ryan Wanner <Ryan.Wanner@...rochip.com>
> Acked-by: Rob Herring (Arm) <robh@...nel.org>
> ---
> .../devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> index 774c3c269c40..4b9f3373503d 100644
> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> @@ -6,7 +6,8 @@ configure it.
> Required properties:
> - compatible:
> "atmel,sama5d2-pinctrl"
> - "microchip,sama7g5-pinctrl"
> + "microchip,sama7d65-pinctrl", "microchip,sama7g5-pinctrl"
Looks like you have one space in front of the line
> + "microchip,sama7g5-pinctrl"
Same here. And this change should not be needed.
> - reg: base address and length of the PIO controller.
> - interrupts: interrupt outputs from the controller, one for each bank.
> - interrupt-controller: mark the device node as an interrupt controller.
Powered by blists - more mailing lists