| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250109133852.360122-1-tglozar@redhat.com>
Date: Thu, 9 Jan 2025 14:38:52 +0100
From: Tomas Glozar <tglozar@...hat.com>
To: Steven Rostedt <rostedt@...dmis.org>
Cc: linux-trace-kernel@...r.kernel.org,
linux-kernel@...r.kernel.org,
John Kacur <jkacur@...hat.com>,
Luis Goncalves <lgoncalv@...hat.com>,
Chang Yin <cyin@...hat.com>,
Qiao Zhao <qzhao@...hat.com>,
Tomas Glozar <tglozar@...hat.com>
Subject: [PATCH] tools/rtla: Add basic test suite
Implement a simple TAP-based test engine in bash and a few basic tests
using it, to be used to check for bugs and regressions.
A new "check" target is added to the rtla Makefile that runs the test suite
using the "prove" command implemented by Test::Harness.
The only test format currently supported is running rtla with defined
command arguments per test, checking its exit code. In case the exit
code is non-zero, the output of rtla is displayed.
The test cases are adopted from rtla tests in the Continuous Kernel
Integration (CKI) project [1] with the authors' approval.
[1] https://gitlab.com/redhat/centos-stream/tests/kernel/kernel-tests/-/blob/main/rt-tests/us/rtla/
Signed-off-by: Tomas Glozar <tglozar@...hat.com>
---
tools/tracing/rtla/Makefile | 4 +++-
tools/tracing/rtla/tests/engine.sh | 29 +++++++++++++++++++++++++++++
tools/tracing/rtla/tests/hwnoise.t | 19 +++++++++++++++++++
tools/tracing/rtla/tests/osnoise.t | 17 +++++++++++++++++
tools/tracing/rtla/tests/timerlat.t | 25 +++++++++++++++++++++++++
5 files changed, 93 insertions(+), 1 deletion(-)
create mode 100644 tools/tracing/rtla/tests/engine.sh
create mode 100644 tools/tracing/rtla/tests/hwnoise.t
create mode 100644 tools/tracing/rtla/tests/osnoise.t
create mode 100644 tools/tracing/rtla/tests/timerlat.t
diff --git a/tools/tracing/rtla/Makefile b/tools/tracing/rtla/Makefile
index a6a7dee16622..8b5101457c70 100644
--- a/tools/tracing/rtla/Makefile
+++ b/tools/tracing/rtla/Makefile
@@ -85,4 +85,6 @@ clean: doc_clean fixdep-clean
$(Q)find . -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
$(Q)rm -f rtla rtla-static fixdep FEATURE-DUMP rtla-*
$(Q)rm -rf feature
-.PHONY: FORCE clean
+check: $(RTLA)
+ RTLA=$(RTLA) prove -o -f tests/
+.PHONY: FORCE clean check
diff --git a/tools/tracing/rtla/tests/engine.sh b/tools/tracing/rtla/tests/engine.sh
new file mode 100644
index 000000000000..547490960a77
--- /dev/null
+++ b/tools/tracing/rtla/tests/engine.sh
@@ -0,0 +1,29 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+test_begin() {
+ # Count tests to allow the test harness to double-check if all were
+ # included correctly.
+ ctr=0
+ [ -z "$RTLA" ] && RTLA="./rtla"
+ [ -n "$TEST_COUNT" ] && echo "1..$TEST_COUNT"
+}
+
+check() {
+ # Simple check: run rtla with given arguments and test exit code.
+ # If TEST_COUNT is set, run the test. Otherwise, just count.
+ ctr=$(($ctr + 1))
+ if [ -n "$TEST_COUNT" ]
+ then
+ # Run rtla; in case of failure, include its output as comment
+ # in the test results.
+ result=$("$RTLA" $2 2>&1) && echo "ok $ctr - $1" || echo "not ok $ctr - $1
+$(echo "$result" | while read line; do echo "# $line"; done)
+"
+ fi
+}
+
+test_end() {
+ # If running without TEST_COUNT, tests are not actually run, just
+ # counted. In that case, re-run the test with the correct count.
+ [ -z "$TEST_COUNT" ] && TEST_COUNT=$ctr exec bash $0 || true
+}
diff --git a/tools/tracing/rtla/tests/hwnoise.t b/tools/tracing/rtla/tests/hwnoise.t
new file mode 100644
index 000000000000..491383e30373
--- /dev/null
+++ b/tools/tracing/rtla/tests/hwnoise.t
@@ -0,0 +1,19 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+source tests/engine.sh
+test_begin
+
+check "verify help page" \
+ "hwnoise --help"
+check "detect noise higher than one microsecond" \
+ "hwnoise -c 0 -T 1 -d 5s -q"
+check "set the automatic trace mode" \
+ "hwnoise -a 5 -d 30s"
+check "set scheduling param to the osnoise tracer threads" \
+ "hwnoise -P F:1 -c 0 -r 900000 -d 1M -q"
+check "stop the trace if a single sample is higher than 1 us" \
+ "hwnoise -s 1 -T 1 -t -d 30s"
+check "enable a trace event trigger" \
+ "hwnoise -t -e osnoise:irq_noise trigger=\"hist:key=desc,duration:sort=desc,duration:vals=hitcount\" -d 1m"
+
+test_end
diff --git a/tools/tracing/rtla/tests/osnoise.t b/tools/tracing/rtla/tests/osnoise.t
new file mode 100644
index 000000000000..83a7625d2226
--- /dev/null
+++ b/tools/tracing/rtla/tests/osnoise.t
@@ -0,0 +1,17 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+source tests/engine.sh
+test_begin
+
+check "verify help page" \
+ "osnoise --help"
+check "verify the --priority/-P param" \
+ "osnoise top -P F:1 -c 0 -r 900000 -d 1M -q"
+check "verify the --stop/-s param" \
+ "osnoise top -s 30 -T 1 -t"
+check "verify the --trace param" \
+ "osnoise hist -s 30 -T 1 -t"
+check "verify the --entries/-E param" \
+ "osnoise hist -P F:1 -c 0 -r 900000 -d 1M -b 10 -E 25"
+
+test_end
diff --git a/tools/tracing/rtla/tests/timerlat.t b/tools/tracing/rtla/tests/timerlat.t
new file mode 100644
index 000000000000..a17218a064bb
--- /dev/null
+++ b/tools/tracing/rtla/tests/timerlat.t
@@ -0,0 +1,25 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+source tests/engine.sh
+test_begin
+
+check "verify help page" \
+ "timerlat --help"
+check "verify -s/--stack" \
+ "timerlat top -s 3 -T 10 -t"
+check "verify -P/--priority" \
+ "timerlat top -P F:1 -c 0 -d 1M -q"
+check "test in nanoseconds" \
+ "timerlat top -i 2 -c 0 -n -d 30s"
+check "set the automatic trace mode" \
+ "timerlat top -a 5 --dump-tasks"
+check "print the auto-analysis if hits the stop tracing condition" \
+ "timerlat top --aa-only 5"
+check "disable auto-analysis" \
+ "timerlat top -s 3 -T 10 -t --no-aa"
+check "verify -c/--cpus" \
+ "timerlat hist -c 0 -d 30s"
+check "hist test in nanoseconds" \
+ "timerlat hist -i 2 -c 0 -n -d 30s"
+
+test_end
--
2.47.1
Powered by blists - more mailing lists