linux-kernel - Re: [PATCH net-next v2 07/14] net: ethernet: qualcomm: Initialize PPE queue settings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5b3c2bde-ad41-4a53-bc55-2fd24c6730c9@quicinc.com>
Date: Fri, 10 Jan 2025 23:38:44 +0800
From: Jie Luo <quic_luoj@...cinc.com>
To: Simon Horman <horms@...nel.org>
CC: Andrew Lunn <andrew+netdev@...n.ch>,
        "David S. Miller"
	<davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
	<kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, Rob Herring
	<robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
	<conor+dt@...nel.org>, Lei Wei <quic_leiwei@...cinc.com>,
        Suruchi Agarwal
	<quic_suruchia@...cinc.com>,
        Pavithra R <quic_pavir@...cinc.com>,
        "Jonathan
 Corbet" <corbet@....net>, Kees Cook <kees@...nel.org>,
        "Gustavo A. R. Silva"
	<gustavoars@...nel.org>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        <linux-arm-msm@...r.kernel.org>, <netdev@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-doc@...r.kernel.org>, <linux-hardening@...r.kernel.org>,
        <quic_kkumarcs@...cinc.com>, <quic_linchen@...cinc.com>,
        <srinivas.kandagatla@...aro.org>, <bartosz.golaszewski@...aro.org>,
        <john@...ozen.org>
Subject: Re: [PATCH net-next v2 07/14] net: ethernet: qualcomm: Initialize PPE
 queue settings



On 1/10/2025 1:52 AM, Simon Horman wrote:
> On Wed, Jan 08, 2025 at 09:47:14PM +0800, Luo Jie wrote:
>> Configure unicast and multicast hardware queues for the PPE
>> ports to enable packet forwarding between the ports.
>>
>> Each PPE port is assigned with a range of queues. The queue ID
>> selection for a packet is decided by the queue base and queue
>> offset that is configured based on the internal priority and
>> the RSS hash value of the packet.
>>
>> Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
>> ---
>>   drivers/net/ethernet/qualcomm/ppe/ppe_config.c | 357 ++++++++++++++++++++++++-
>>   drivers/net/ethernet/qualcomm/ppe/ppe_config.h |  63 +++++
>>   drivers/net/ethernet/qualcomm/ppe/ppe_regs.h   |  21 ++
>>   3 files changed, 440 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe_config.c b/drivers/net/ethernet/qualcomm/ppe/ppe_config.c
> 
> ...
> 
>> @@ -673,6 +701,111 @@ static struct ppe_scheduler_port_config ppe_port_sch_config[] = {
>>   	},
>>   };
>>   
>> +/* The scheduler resource is applied to each PPE port, The resource
>> + * includes the unicast & multicast queues, flow nodes and DRR nodes.
>> + */
>> +static struct ppe_port_schedule_resource ppe_scheduler_res[] = {
>> +	{	.ucastq_start	= 0,
>> +		.ucastq_end	= 63,
>> +		.mcastq_start	= 256,
>> +		.ucastq_end	= 271,
> 
> Hi Luo Jie,
> 
> This appears to duplicate the initialisation of .ucastq_end.
> Should the line above initialise .mcastq_end instead?
> 
> Likewise for other elements of this array.
> 
> Flagged by W=1 builds with both clang-19 and gcc-14.

Thanks for pointing to this. I will update the code and build the
patches with latest GCC version gcc-14 flagged by W=1 to check the
patches.

> 
>> +		.flow_id_start	= 0,
>> +		.flow_id_end	= 0,
>> +		.l0node_start	= 0,
>> +		.l0node_end	= 7,
>> +		.l1node_start	= 0,
>> +		.l1node_end	= 0,
>> +	},
>> +	{	.ucastq_start	= 144,
>> +		.ucastq_end	= 159,
>> +		.mcastq_start	= 272,
>> +		.ucastq_end	= 275,
>> +		.flow_id_start	= 36,
>> +		.flow_id_end	= 39,
>> +		.l0node_start	= 48,
>> +		.l0node_end	= 63,
>> +		.l1node_start	= 8,
>> +		.l1node_end	= 11,
>> +	},
> 
> ...
> 
>> +};
> 
> ...