lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250112150404.6ffb7160@jic23-huawei>
Date: Sun, 12 Jan 2025 15:04:04 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: Angelo Dureghello <adureghello@...libre.com>
Cc: Lars-Peter Clausen <lars@...afoo.de>, Michael Hennerich
 <Michael.Hennerich@...log.com>, David Lechner <dlechner@...libre.com>, Nuno
 Sa <nuno.sa@...log.com>, Jonathan Cameron <Jonathan.Cameron@...wei.com>,
 linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 2/9] iio: dac: ad3552r-hs: clear reset status flag

On Fri, 10 Jan 2025 11:24:14 +0100
Angelo Dureghello <adureghello@...libre.com> wrote:

> From: Angelo Dureghello <adureghello@...libre.com>
> 
> Clear reset status flag, to keep error status register
> clean after reset (ad3552r manual, rev B table 38).
> 
> Reset error flag was left to 1, so debugging registers, the
> "Error Status Register" was dirty (0x01). It is important
> to clear this bit, so if there is any reset event over normal
> working mode, it is possible to detect it.
> 
> Fixes: 0b4d9fe58be8 ("iio: dac: ad3552r: add high-speed platform driver")
> Reviewed-by: David Lechner <dlechner@...libre.com>
> Signed-off-by: Angelo Dureghello <adureghello@...libre.com>
Ah. I should have checked for newer versions. Anyhow, picked up v2 of patches
1 and 2. 

> ---
>  drivers/iio/dac/ad3552r-hs.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/iio/dac/ad3552r-hs.c b/drivers/iio/dac/ad3552r-hs.c
> index 216c634f3eaf..8974df625670 100644
> --- a/drivers/iio/dac/ad3552r-hs.c
> +++ b/drivers/iio/dac/ad3552r-hs.c
> @@ -329,6 +329,12 @@ static int ad3552r_hs_setup(struct ad3552r_hs_state *st)
>  		dev_info(st->dev, "Chip ID error. Expected 0x%x, Read 0x%x\n",
>  			 AD3552R_ID, id);
>  
> +	/* Clear reset error flag, see ad3552r manual, rev B table 38. */
> +	ret = st->data->bus_reg_write(st->back, AD3552R_REG_ADDR_ERR_STATUS,
> +				      AD3552R_MASK_RESET_STATUS, 1);
> +	if (ret)
> +		return ret;
> +
>  	ret = st->data->bus_reg_write(st->back,
>  				      AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
>  				      0, 1);
> 


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ