[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <35f8fe37-b06f-49eb-b0c2-430421f1ff3b@classfun.cn>
Date: Mon, 13 Jan 2025 06:16:42 +0800
From: Junhao Xie <bigfoot@...ssfun.cn>
To: Dragan Simic <dsimic@...jaro.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Heiko Stuebner <heiko@...ech.de>,
Jonas Karlman <jonas@...boo.se>, Chukun Pan <amadeus@....edu.cn>,
FUKAUMI Naoki <naoki@...xa.com>, linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org, Junhao Xie <bigfoot@...ssfun.cn>
Subject: Re: [PATCH v6 3/3] arm64: dts: rockchip: add dts for Ariaboard
Photonicat RK3568
On 2025/1/12 16:47, Dragan Simic wrote:
> Hello Junhao,
>
> On 2025-01-12 08:33, Junhao Xie wrote:
>> Add dts for Ariaboard Photonicat RK3568.
>>
>> Working IO:
>> Debug UART
>> SDIO QCA9377 WiFi and Bluetooth
>> M.2 E-Key PCIe WiFi and Bluetooth
>> M.2 B-Key USB Modem WWAN
>> Ethernet WAN Port
>> MicroSD Card slot
>> eMMC
>> HDMI Output
>> Mali GPU
>> USB Type-A
>>
>> Not working IO:
>> Ethernet LAN Port (Lack of SGMII support)
>> Power management MCU on UART4 (Driver pending)
>>
>> Not working IO in MCU:
>> Battery voltage sensor
>> Board temperature sensor
>> Hardware Power-off
>> Hardware Watchdog
>> Network status LED
>> Real-time clock
>> USB Charger voltage sensor
>>
>> About onboard power management MCU:
>> A heartbeat must be sent to the MCU within 60 seconds,
>> otherwise the MCU will restart the system.
>> When powering off, a shutdown command needs to be sent to the MCU.
>> When the power button is long pressed, the MCU will send a shutdown
>> command to the system. If system does not shutdown within 60 seconds,
>> the power will be turned off directly.
>> MCU only provides voltage for charger and battery.
>> Manufacturer removed RK8xx PMIC.
>
> Unless the design of the board is proprietary, it would be good
> to provide a link to the board schematic, for those interested
> in verifying the board DT file.
>
> As a note, I already tried to find the board schematic with no
> success, so the design might be proprietary.
Yes, this board is proprietary. I asked the manufacturer and
they don't provide schematics.
But I found a partial schematic diagram of some of connectors on the board here
https://dl.ariaboard.com/photonicat_rk3568/Photonicat%20rk3568%20EVB%20Board%20spec.pdf
Best regards,
Junhao
Powered by blists - more mailing lists