[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <c520a0d829bbe26b9802f57f94f3957c@manjaro.org>
Date: Sun, 12 Jan 2025 09:50:23 +0100
From: Dragan Simic <dsimic@...jaro.org>
To: Junhao Xie <bigfoot@...ssfun.cn>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, Rob
Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor
Dooley <conor+dt@...nel.org>, Heiko Stuebner <heiko@...ech.de>, Jonas
Karlman <jonas@...boo.se>, Chukun Pan <amadeus@....edu.cn>, FUKAUMI Naoki
<naoki@...xa.com>, linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 0/3] Add support for Ariaboard Photonicat RK3568
Hello Junhao,
On 2025-01-12 08:33, Junhao Xie wrote:
> Add dts for Ariaboard Photonicat RK3568.
>
> This series bring support for:
> * Debug UART
> * SDIO QCA9377 WiFi and Bluetooth
> * M.2 E-Key PCIe WiFi and Bluetooth
> * M.2 B-Key USB Modem WWAN
> * Ethernet WAN Port
> * MicroSD Card slot
> * eMMC
> * HDMI Output
> * Mali GPU
> * USB Type-A
>
> Changed from v1:
> - move some general nodes (firmware, ramoops, reboot-mode) to
> rk356x.dtsi
This entry from the changelog caught my attention, so I tried
to find out what exactly happened back then. Though, after going
through the mailing list archive, I still don't see where the
as-described change took place, so perhaps this changelog entry
needs adjusting.
> - gmac1 change to phy-mode rgmii-id
> - corrected some regulator to be closer to schematics
> - rename rk3568-ariaboard-photonicat.dts to rk3568-photonicat.dts
> https://lore.kernel.org/lkml/20240904111456.87089-1-bigfoot@classfun.cn/
>
> Changed from v2:
> - remove unused headers
> - corrected some regulator to be closer to schematics
> - remove usb_host1_ohci, usb_host1_ehci, usb2phy1_host that have no
> connection
> https://lore.kernel.org/lkml/20240906045706.1004813-1-bigfoot@classfun.cn/
>
> Changed from v3:
> - corrected some regulator to be closer to schematics
> - changed to using clk32k_out1 in xin32k
> https://lore.kernel.org/lkml/20240911122809.1789778-2-bigfoot@classfun.cn/
>
> Changed from v4:
> - corrected some regulator to be closer to schematics
> - corrected some label to match node name
> - use resets props in phy node instead deprecated snps,reset-gpio
> https://lore.kernel.org/lkml/20240914145549.879936-1-bigfoot@classfun.cn/
>
> Changed from v5:
> - resort regulator nodes
> - remove dr_mode from usb_host1_xhci
> https://lore.kernel.org/lkml/20241108031847.700606-1-bigfoot@classfun.cn/
>
> Junhao Xie (3):
> dt-bindings: vendor-prefixes: Add prefix for Ariaboard
> dt-bindings: arm: rockchip: Add Ariaboard Photonicat RK3568
> arm64: dts: rockchip: add dts for Ariaboard Photonicat RK3568
>
> .../devicetree/bindings/arm/rockchip.yaml | 5 +
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3568-photonicat.dts | 599 ++++++++++++++++++
> 4 files changed, 607 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts
Powered by blists - more mailing lists