[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250121094140.4006801-2-quic_wenbyao@quicinc.com>
Date: Tue, 21 Jan 2025 17:41:39 +0800
From: Wenbin Yao <quic_wenbyao@...cinc.com>
To: vkoul@...nel.org, kishon@...nel.org, p.zabel@...gutronix.de,
dmitry.baryshkov@...aro.org, abel.vesa@...aro.org,
quic_qianyu@...cinc.com, neil.armstrong@...aro.org,
manivannan.sadhasivam@...aro.org, quic_devipriy@...cinc.com,
konrad.dybcio@....qualcomm.com, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: quic_wenbyao@...cinc.com
Subject: [PATCH 1/2] phy: qcom: pcie: Determine has_nocsr_reset dynamically
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Decide the in-driver logic based on whether the nocsr reset is present
and defer checking the appropriateness of that to dt-bindings to save
on boilerplate.
Reset controller APIs are fine consuming a nullptr, so no additional
checks are necessary there.
Signed-off-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Signed-off-by: Wenbin Yao <quic_wenbyao@...cinc.com>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 18 +++++++-----------
1 file changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 873f2f9844c6..ac42e4b01065 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -2793,8 +2793,6 @@ struct qmp_phy_cfg {
bool skip_start_delay;
- bool has_nocsr_reset;
-
/* QMP PHY pipe clock interface rate */
unsigned long pipe_clock_rate;
@@ -3685,7 +3683,6 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
- .has_nocsr_reset = true,
/* 20MHz PHY AUX Clock */
.aux_clock_rate = 20000000,
@@ -3718,7 +3715,6 @@ static const struct qmp_phy_cfg sm8650_qmp_gen4x2_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
- .has_nocsr_reset = true,
/* 20MHz PHY AUX Clock */
.aux_clock_rate = 20000000,
@@ -3836,7 +3832,6 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x2_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
- .has_nocsr_reset = true,
};
static const struct qmp_phy_cfg x1e80100_qmp_gen4x4_pciephy_cfg = {
@@ -3870,7 +3865,6 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x4_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
- .has_nocsr_reset = true,
};
static const struct qmp_phy_cfg x1e80100_qmp_gen4x8_pciephy_cfg = {
@@ -3902,7 +3896,6 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x8_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
- .has_nocsr_reset = true,
};
static void qmp_pcie_init_port_b(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tbls *tbls)
@@ -4203,11 +4196,14 @@ static int qmp_pcie_reset_init(struct qmp_pcie *qmp)
if (ret)
return dev_err_probe(dev, ret, "failed to get resets\n");
- if (cfg->has_nocsr_reset) {
- qmp->nocsr_reset = devm_reset_control_get_exclusive(dev, "phy_nocsr");
- if (IS_ERR(qmp->nocsr_reset))
+ qmp->nocsr_reset = devm_reset_control_get_exclusive(dev, "phy_nocsr");
+ if (IS_ERR(qmp->nocsr_reset)) {
+ if (PTR_ERR(qmp->nocsr_reset) == -ENOENT ||
+ PTR_ERR(qmp->nocsr_reset) == -EINVAL)
+ qmp->nocsr_reset = NULL;
+ else
return dev_err_probe(dev, PTR_ERR(qmp->nocsr_reset),
- "failed to get no-csr reset\n");
+ "failed to get no-csr reset\n");
}
return 0;
--
2.34.1
Powered by blists - more mailing lists