linux-kernel - Re: [PATCH v4 2/4] arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMuHMdUofvZMtcEK3t5HMbqVDgU438Jc7KEcjJHBPcvkx91Y4w@mail.gmail.com>
Date: Fri, 24 Jan 2025 13:51:59 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Claudiu <claudiu.beznea@...on.dev>
Cc: magnus.damm@...il.com, robh@...nel.org, krzk+dt@...nel.org, 
	conor+dt@...nel.org, gregkh@...uxfoundation.org, jirislaby@...nel.org, 
	p.zabel@...gutronix.de, claudiu.beznea.uj@...renesas.com, 
	wsa+renesas@...g-engineering.com, prabhakar.mahadev-lad.rj@...renesas.com, 
	linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org, 
	linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Subject: Re: [PATCH v4 2/4] arm64: dts: renesas: rzg3s-smarc-switches: Add a
 header to describe different switches

On Mon, Jan 20, 2025 at 2:09 PM Claudiu <claudiu.beznea@...on.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>
> There are different switches available on both the RZ/G3S SMARC Module and
> RZ SMARC Carrier II boards. These switches are used to route different SoC
> signals to different parts available on board.
>
> These switches are described in device trees through macros. These macros
> are set accordingly such that the resulted compiled dtb to describe the
> on-board switches states.
>
> The SCIF1 depends on the state of the SW_CONFIG3 and SW_OPT_MUX4 switches.
> SCIF1 can be enabled through a device tree overlay. To manage all switches
> in a unified state and allow users to configure the output device tree, add
> a file that contains all switch definitions and states.
>
> Commit prepares the code to enable SCIF1 on the RZ/G3S overlay.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> ---
>
> Changes in v4:
> - adjusted the patch description
> - used GPL-2.0-only OR BSD-2-Clause license
> - used proper description for SW_CONFIG3

Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>
i.e. will queue in renesas-devel for v6.15.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds