[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b99ec75a9f8a47df72a0e8cf126d7e9312ce59c1.1737985435.git.Jonathan.Santos@analog.com>
Date: Mon, 27 Jan 2025 12:12:29 -0300
From: Jonathan Santos <Jonathan.Santos@...log.com>
To: <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Jonathan Santos <Jonathan.Santos@...log.com>, <lars@...afoo.de>,
<Michael.Hennerich@...log.com>, <marcelo.schmitt@...log.com>,
<jic23@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <jonath4nns@...il.com>,
<marcelo.schmitt1@...il.com>
Subject: [PATCH v2 06/16] iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
Datasheet recommends Setting the MOSI idle state to high in order to
prevent accidental reset of the device when SCLK is free running.
This happens when the controller clocks out a 1 followed by 63 zeros
while the CS is held low.
Check if SPI controller supports SPI_MOSI_IDLE_HIGH flag and set it.
Fixes: a5f8c7da3dbe ("iio: adc: Add AD7768-1 ADC basic support")
Signed-off-by: Jonathan Santos <Jonathan.Santos@...log.com>
---
v2 Changes:
* Only setup SPI_MOSI_IDLE_HIGH flag if the controller supports it, otherwise the driver
continues the same. I realized that using bits_per_word does not avoid the problem that
MOSI idle state is trying to solve. If the controller drives the MOSI low between bytes
during a transfer, nothing happens.
---
drivers/iio/adc/ad7768-1.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
index c3cf04311c40..95ba89435652 100644
--- a/drivers/iio/adc/ad7768-1.c
+++ b/drivers/iio/adc/ad7768-1.c
@@ -574,6 +574,22 @@ static int ad7768_probe(struct spi_device *spi)
return -ENOMEM;
st = iio_priv(indio_dev);
+ /*
+ * Datasheet recommends SDI line to be kept high when
+ * data is not being clocked out of the controller
+ * and the spi clock is free running, to prevent
+ * accidental reset.
+ * Since many controllers do not support the
+ * SPI_MOSI_IDLE_HIGH flag yet, only request the MOSI
+ * idle state to enable if the controller supports it.
+ */
+ if (spi->controller->mode_bits & SPI_MOSI_IDLE_HIGH) {
+ spi->mode |= SPI_MOSI_IDLE_HIGH;
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;
+ }
+
st->spi = spi;
st->vref = devm_regulator_get(&spi->dev, "vref");
--
2.34.1
Powered by blists - more mailing lists