| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0968f9cfc55c5ac80492a88bbe95fc8ff7208fa5.1737985435.git.Jonathan.Santos@analog.com>
Date: Mon, 27 Jan 2025 12:12:43 -0300
From: Jonathan Santos <Jonathan.Santos@...log.com>
To: <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Jonathan Santos <Jonathan.Santos@...log.com>, <lars@...afoo.de>,
<Michael.Hennerich@...log.com>, <marcelo.schmitt@...log.com>,
<jic23@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <jonath4nns@...il.com>,
<marcelo.schmitt1@...il.com>
Subject: [PATCH v2 07/16] iio: adc: ad7768-1: convert driver to use regmap
Convert the AD7768-1 driver to use the regmap API for register
access. This change simplifies and standardizes register interactions,
reducing code duplication and improving maintainability.
Signed-off-by: Jonathan Santos <Jonathan.Santos@...log.com>
---
v2 Changes:
* New patch in v2.
---
drivers/iio/adc/ad7768-1.c | 82 +++++++++++++++++++++++++++-----------
1 file changed, 58 insertions(+), 24 deletions(-)
diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
index 95ba89435652..fb8d6fae5f8a 100644
--- a/drivers/iio/adc/ad7768-1.c
+++ b/drivers/iio/adc/ad7768-1.c
@@ -12,6 +12,7 @@
#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/sysfs.h>
#include <linux/spi/spi.h>
@@ -153,6 +154,7 @@ static const struct iio_chan_spec ad7768_channels[] = {
struct ad7768_state {
struct spi_device *spi;
+ struct regmap *regmap;
struct regulator *vref;
struct mutex lock;
struct clk *mclk;
@@ -176,12 +178,17 @@ struct ad7768_state {
} data __aligned(IIO_DMA_MINALIGN);
};
-static int ad7768_spi_reg_read(struct ad7768_state *st, unsigned int addr,
- unsigned int len)
+static int ad7768_spi_reg_read(void *context, unsigned int addr,
+ unsigned int *val)
{
- unsigned int shift;
+ struct iio_dev *dev = context;
+ struct ad7768_state *st;
+ unsigned int shift, len;
int ret;
+ st = iio_priv(dev);
+ /* Regular value size is 1 Byte, but 3 Bytes for ADC data */
+ len = (addr == AD7768_REG_ADC_DATA) ? 3 : 1;
shift = 32 - (8 * len);
st->data.d8[0] = AD7768_RD_FLAG_MSK(addr);
@@ -190,13 +197,19 @@ static int ad7768_spi_reg_read(struct ad7768_state *st, unsigned int addr,
if (ret < 0)
return ret;
- return (be32_to_cpu(st->data.d32) >> shift);
+ *val = be32_to_cpu(st->data.d32) >> shift;
+
+ return 0;
}
-static int ad7768_spi_reg_write(struct ad7768_state *st,
+static int ad7768_spi_reg_write(void *context,
unsigned int addr,
unsigned int val)
{
+ struct iio_dev *dev = context;
+ struct ad7768_state *st;
+
+ st = iio_priv(dev);
st->data.d8[0] = AD7768_WR_FLAG_MSK(addr);
st->data.d8[1] = val & 0xFF;
@@ -206,16 +219,16 @@ static int ad7768_spi_reg_write(struct ad7768_state *st,
static int ad7768_set_mode(struct ad7768_state *st,
enum ad7768_conv_mode mode)
{
- int regval;
+ int regval, ret;
- regval = ad7768_spi_reg_read(st, AD7768_REG_CONVERSION, 1);
- if (regval < 0)
- return regval;
+ ret = regmap_read(st->regmap, AD7768_REG_CONVERSION, ®val);
+ if (ret)
+ return ret;
regval &= ~AD7768_CONV_MODE_MSK;
regval |= AD7768_CONV_MODE(mode);
- return ad7768_spi_reg_write(st, AD7768_REG_CONVERSION, regval);
+ return regmap_write(st->regmap, AD7768_REG_CONVERSION, regval);
}
static int ad7768_scan_direct(struct iio_dev *indio_dev)
@@ -234,9 +247,10 @@ static int ad7768_scan_direct(struct iio_dev *indio_dev)
if (!ret)
return -ETIMEDOUT;
- readval = ad7768_spi_reg_read(st, AD7768_REG_ADC_DATA, 3);
- if (readval < 0)
- return readval;
+ ret = regmap_read(st->regmap, AD7768_REG_ADC_DATA, &readval);
+ if (ret)
+ return ret;
+
/*
* Any SPI configuration of the AD7768-1 can only be
* performed in continuous conversion mode.
@@ -258,13 +272,11 @@ static int ad7768_reg_access(struct iio_dev *indio_dev,
mutex_lock(&st->lock);
if (readval) {
- ret = ad7768_spi_reg_read(st, reg, 1);
- if (ret < 0)
+ ret = regmap_read(st->regmap, reg, readval);
+ if (ret)
goto err_unlock;
- *readval = ret;
- ret = 0;
} else {
- ret = ad7768_spi_reg_write(st, reg, writeval);
+ ret = regmap_write(st->regmap, reg, writeval);
}
err_unlock:
mutex_unlock(&st->lock);
@@ -283,7 +295,7 @@ static int ad7768_set_dig_fil(struct ad7768_state *st,
else
mode = AD7768_DIG_FIL_DEC_RATE(dec_rate);
- ret = ad7768_spi_reg_write(st, AD7768_REG_DIGITAL_FILTER, mode);
+ ret = regmap_write(st->regmap, AD7768_REG_DIGITAL_FILTER, mode);
if (ret < 0)
return ret;
@@ -320,7 +332,7 @@ static int ad7768_set_freq(struct ad7768_state *st,
*/
pwr_mode = AD7768_PWR_MCLK_DIV(ad7768_clk_config[idx].mclk_div) |
AD7768_PWR_PWRMODE(ad7768_clk_config[idx].pwrmode);
- ret = ad7768_spi_reg_write(st, AD7768_REG_POWER_CLOCK, pwr_mode);
+ ret = regmap_write(st->regmap, AD7768_REG_POWER_CLOCK, pwr_mode);
if (ret < 0)
return ret;
@@ -447,11 +459,11 @@ static int ad7768_setup(struct ad7768_state *st)
* to 10. When the sequence is detected, the reset occurs.
* See the datasheet, page 70.
*/
- ret = ad7768_spi_reg_write(st, AD7768_REG_SYNC_RESET, 0x3);
+ ret = regmap_write(st->regmap, AD7768_REG_SYNC_RESET, 0x3);
if (ret)
return ret;
- ret = ad7768_spi_reg_write(st, AD7768_REG_SYNC_RESET, 0x2);
+ ret = regmap_write(st->regmap, AD7768_REG_SYNC_RESET, 0x2);
if (ret)
return ret;
@@ -509,18 +521,19 @@ static int ad7768_buffer_postenable(struct iio_dev *indio_dev)
* continuous read mode. Subsequent data reads do not require an
* initial 8-bit write to query the ADC_DATA register.
*/
- return ad7768_spi_reg_write(st, AD7768_REG_INTERFACE_FORMAT, 0x01);
+ return regmap_write(st->regmap, AD7768_REG_INTERFACE_FORMAT, 0x01);
}
static int ad7768_buffer_predisable(struct iio_dev *indio_dev)
{
struct ad7768_state *st = iio_priv(indio_dev);
+ unsigned int regval;
/*
* To exit continuous read mode, perform a single read of the ADC_DATA
* reg (0x2C), which allows further configuration of the device.
*/
- return ad7768_spi_reg_read(st, AD7768_REG_ADC_DATA, 3);
+ return regmap_read(st->regmap, AD7768_REG_ADC_DATA, ®val);
}
static const struct iio_buffer_setup_ops ad7768_buffer_ops = {
@@ -563,6 +576,20 @@ static int ad7768_set_channel_label(struct iio_dev *indio_dev,
return 0;
}
+static const struct regmap_bus ad7768_regmap_bus = {
+ .reg_write = ad7768_spi_reg_write,
+ .reg_read = ad7768_spi_reg_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_BIG,
+ .val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static const struct regmap_config ad7768_regmap_config = {
+ .name = "ad7768-1",
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = AD7768_REG_MCLK_COUNTER,
+};
+
static int ad7768_probe(struct spi_device *spi)
{
struct ad7768_state *st;
@@ -592,6 +619,13 @@ static int ad7768_probe(struct spi_device *spi)
st->spi = spi;
+ st->regmap = devm_regmap_init(&spi->dev,
+ &ad7768_regmap_bus, indio_dev,
+ &ad7768_regmap_config);
+ if (IS_ERR(st->regmap))
+ return dev_err_probe(&spi->dev, PTR_ERR(st->regmap),
+ "Failed to initialize regmap");
+
st->vref = devm_regulator_get(&spi->dev, "vref");
if (IS_ERR(st->vref))
return PTR_ERR(st->vref);
--
2.34.1
Powered by blists - more mailing lists