linux-kernel - [PATCH 4/9] usb: cdns3-ti: run HW init at resume() if HW was reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250129105613.403923-4-theo.lebrun@bootlin.com>
Date: Wed, 29 Jan 2025 11:56:08 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: theo.lebrun@...tlin.com,
	mathias.nyman@...ux.intel.com
Cc: rogerq@...nel.org,
	peter.chen@...nel.org,
	pawell@...ence.com,
	gregkh@...uxfoundation.org,
	mathias.nyman@...el.com,
	gregory.clement@...tlin.com,
	thomas.petazzoni@...tlin.com,
	linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH 4/9] usb: cdns3-ti: run HW init at resume() if HW was reset

At runtime_resume(), read the W1 (Wrapper Register 1) register to detect
if an hardware reset occurred. If it did, run the hardware init sequence.

This callback will be called at system-wide resume. Previously, if a
reset occurred during suspend, we would crash. The wrapper config had
not been written, leading to invalid register accesses inside cdns3.

Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
 drivers/usb/cdns3/cdns3-ti.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/usb/cdns3/cdns3-ti.c b/drivers/usb/cdns3/cdns3-ti.c
index 2863249665c2..225993f7bdb6 100644
--- a/drivers/usb/cdns3/cdns3-ti.c
+++ b/drivers/usb/cdns3/cdns3-ti.c
@@ -186,6 +186,12 @@ static int cdns_ti_probe(struct platform_device *pdev)
 	data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
 	data->usb2_only = device_property_read_bool(dev, "ti,usb2-only");
 
+	/*
+	 * The call below to pm_runtime_get_sync() MIGHT reset hardware, if it
+	 * detects it as uninitialised. We want to enforce a reset at probe,
+	 * and so do it manually here. This means the first runtime_resume()
+	 * will be a no-op.
+	 */
 	cdns_ti_reset_and_init_hw(data);
 
 	pm_runtime_enable(dev);
@@ -230,6 +236,24 @@ static void cdns_ti_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 }
 
+static int cdns_ti_runtime_resume(struct device *dev)
+{
+	const u32 mask = USBSS_W1_PWRUP_RST | USBSS_W1_MODESTRAP_SEL;
+	struct cdns_ti *data = dev_get_drvdata(dev);
+	u32 w1;
+
+	w1 = cdns_ti_readl(data, USBSS_W1);
+	if ((w1 & mask) != mask)
+		cdns_ti_reset_and_init_hw(data);
+
+	return 0;
+}
+
+static const struct dev_pm_ops cdns_ti_pm_ops = {
+	RUNTIME_PM_OPS(NULL, cdns_ti_runtime_resume, NULL)
+	SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
+};
+
 static const struct of_device_id cdns_ti_of_match[] = {
 	{ .compatible = "ti,j721e-usb", },
 	{ .compatible = "ti,am64-usb", },
@@ -243,6 +267,7 @@ static struct platform_driver cdns_ti_driver = {
 	.driver		= {
 		.name	= "cdns3-ti",
 		.of_match_table	= cdns_ti_of_match,
+		.pm     = pm_ptr(&cdns_ti_pm_ops),
 	},
 };
 
-- 
2.48.1