lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <63cda072-3671-42c9-9650-7a3ece39dec6@cherry.de>
Date: Fri, 31 Jan 2025 17:02:24 +0100
From: Quentin Schulz <quentin.schulz@...rry.de>
To: Heiko Stuebner <heiko@...ech.de>, vkoul@...nel.org, kishon@...nel.org
Cc: robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
 sebastian.reichel@...labora.com, linux-phy@...ts.infradead.org,
 devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
 linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
 dse@...umatec.com
Subject: Re: [PATCH v5 0/2] MIPI DSI phy for rk3588

Hi Heiko,

On 12/3/24 5:49 PM, Heiko Stuebner wrote:
> This adds the phy driver need for DSI output on rk3588.
> 
> The phy itself is used for both DSI output and CSI input, though the
> CSI part for the whole chain needs a lot more work, so is left out for
> now and only the DSI part implemented.
> 
> This allows the rk3588 with its current VOP support to drive a DSI display
> using the DSI2 controller driver I'll submit in a next step.
> 
> Only generic phy interfaces are used, so the DSI part is pretty straight
> forward.
> 

Tested-by: Quentin Schulz <quentin.schulz@...rry.de> # RK3588 Tiger with 
Haikou Video Demo

I assume this is the same setup you tested this series with, but 
confirmation doesn't hurt.

Tested with 
https://lore.kernel.org/linux-rockchip/20241127143719.660658-4-heiko@sntech.de/ 
applied on top.

Thanks!
Quentin

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ