| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ferdaevlfrpf2ewzcct7mqyxltvmt6aaar4fujxfehrmizm3qw@aaroprnpwlxq>
Date: Sun, 9 Feb 2025 00:06:34 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Nitin Rawat <quic_nitirawa@...cinc.com>
Cc: Melody Olvera <quic_molvera@...cinc.com>,
Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>, Avri Altman <avri.altman@....com>,
Bart Van Assche <bvanassche@....org>, Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>, Konrad Dybcio <konradybcio@...nel.org>,
Satya Durga Srinivasu Prabhala <quic_satyap@...cinc.com>, Trilok Soni <quic_tsoni@...cinc.com>,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org,
Manish Pandey <quic_mapa@...cinc.com>
Subject: Re: [PATCH 4/5] arm64: dts: qcom: sm8750: Add UFS nodes for SM8750
SoC
On Sun, Feb 09, 2025 at 12:47:56AM +0530, Nitin Rawat wrote:
>
>
> On 1/14/2025 4:22 PM, Dmitry Baryshkov wrote:
> > On Mon, Jan 13, 2025 at 01:46:27PM -0800, Melody Olvera wrote:
> > > From: Nitin Rawat <quic_nitirawa@...cinc.com>
> > >
> > > Add UFS host controller and PHY nodes for SM8750 SoC.
> > >
> > > Co-developed-by: Manish Pandey <quic_mapa@...cinc.com>
> > > Signed-off-by: Manish Pandey <quic_mapa@...cinc.com>
> > > Signed-off-by: Nitin Rawat <quic_nitirawa@...cinc.com>
> > > Signed-off-by: Melody Olvera <quic_molvera@...cinc.com>
> > > ---
> > > arch/arm64/boot/dts/qcom/sm8750.dtsi | 81 ++++++++++++++++++++++++++++++++++++
> > > 1 file changed, 81 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> > > index 3bbd7d18598ee0a3a0d5130c03a3166e1fc14d82..20690c102244b337847a6482dd83c37e19746de9 100644
> > > --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> > > @@ -13,6 +13,7 @@
> > > #include <dt-bindings/power/qcom,rpmhpd.h>
> > > #include <dt-bindings/power/qcom-rpmpd.h>
> > > #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> > > +#include <dt-bindings/gpio/gpio.h>
> > > / {
> > > interrupt-parent = <&intc>;
> > > @@ -1939,6 +1940,86 @@ mmss_noc: interconnect@...0000 {
> > > #interconnect-cells = <2>;
> > > };
> > > + ufs_mem_phy: phy@...0000 {
> > > + compatible = "qcom,sm8750-qmp-ufs-phy";
> > > + reg = <0x0 0x01d80000 0x0 0x2000>;
> > > +
> > > + clocks = <&rpmhcc RPMH_CXO_CLK>,
> > > + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
> > > + <&tcsrcc TCSR_UFS_CLKREF_EN>;
> > > + clock-names = "ref",
> > > + "ref_aux",
> > > + "qref";
> > > +
> > > + resets = <&ufs_mem_hc 0>;
> > > + reset-names = "ufsphy";
> > > +
> > > + power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>;
> > > +
> > > + #clock-cells = <1>;
> > > + #phy-cells = <0>;
> > > +
> > > + status = "disabled";
> > > + };
> > > +
> > > + ufs_mem_hc: ufs@...4000 {
> > > + compatible = "qcom,sm8750-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
> > > + reg = <0x0 0x01d84000 0x0 0x3000>;
> > > +
> > > + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> > > +
> > > + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> > > + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> > > + <&gcc GCC_UFS_PHY_AHB_CLK>,
> > > + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> > > + <&rpmhcc RPMH_LN_BB_CLK3>,
> > > + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> > > + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> > > + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> > > + clock-names = "core_clk",
> > > + "bus_aggr_clk",
> > > + "iface_clk",
> > > + "core_clk_unipro",
> > > + "ref_clk",
> > > + "tx_lane0_sync_clk",
> > > + "rx_lane0_sync_clk",
> > > + "rx_lane1_sync_clk";
> > > + freq-table-hz = <100000000 403000000>,
> > > + <0 0>,
> > > + <0 0>,
> > > + <100000000 403000000>,
> > > + <100000000 403000000>,
> > > + <0 0>,
> > > + <0 0>,
> > > + <0 0>;
> >
> > Use OPP table instead
>
> Currently, OPP is not enabled in the device tree for any previous targets. I
Excuse me? ufs_opp_table is present on SM8250, SM8550 and SDM845 (and
QCS615). So this is not correct
> plan to enable OPP in a separate patch at a later stage. This is because
> there is an ongoing patch in the upstream that aims to enable multiple-level
> clock scaling using OPP, which may introduce changes to the device tree
> entries. To avoid extra efforts, I intend to enable OPP once that patch is
> merged.
Whatever changes are introduced, old DT must still continue to work.
There is no reason to use legacy freq-table-hz if you can use OPP table.
> Please let me know if you have any concerns.
>
>
> >
> > > +
> > > + resets = <&gcc GCC_UFS_PHY_BCR>;
> > > + reset-names = "rst";
> > > +
> > > +
> > > + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
> > > + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> > > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> > > + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
> >
> > Shouldn't cpu-ufs be ACTIVE_ONLY?
>
> As per ufs driver implementation, Icc voting from ufs driver is removed as
> part of low power mode (suspend or clock gating) and voted again in
> resume/ungating path. Hence TAG_ALWAYS will have no power concern.
> All previous targets have the same configuration.
arch/arm64/boot/dts/qcom/qcs615.dtsi: &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
It might be a mistake for that target though. Your explanation sounds
fine to me.
>
> Thanks,
> Nitin
>
>
> >
> > > + interconnect-names = "ufs-ddr",
> > > + "cpu-ufs";
> > > +
> > > + power-domains = <&gcc GCC_UFS_PHY_GDSC>;
> > > + required-opps = <&rpmhpd_opp_nom>;
> > > +
> > > + iommus = <&apps_smmu 0x60 0>;
> > > + dma-coherent;
> > > +
> > > + lanes-per-direction = <2>;
> > > +
> > > + phys = <&ufs_mem_phy>;
> > > + phy-names = "ufsphy";
> > > +
> > > + #reset-cells = <1>;
> > > +
> > > + status = "disabled";
> > > + };
> > > +
> > > tcsr_mutex: hwlock@...0000 {
> > > compatible = "qcom,tcsr-mutex";
> > > reg = <0x0 0x01f40000 0x0 0x20000>;
> > >
> > > --
> > > 2.46.1
> > >
> >
>
>
> --
> linux-phy mailing list
> linux-phy@...ts.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy
--
With best wishes
Dmitry
Powered by blists - more mailing lists