linux-kernel - Re: [PATCH v7 0/3] Add support for Ariaboard Photonicat RK3568

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <173918381711.1055685.16665650203421102883.b4-ty@sntech.de>
Date: Mon, 10 Feb 2025 11:39:33 +0100
From: Heiko Stuebner <heiko@...ech.de>
To: devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	Junhao Xie <bigfoot@...ssfun.cn>
Cc: Heiko Stuebner <heiko@...ech.de>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Jonas Karlman <jonas@...boo.se>,
	Chukun Pan <amadeus@....edu.cn>,
	FUKAUMI Naoki <naoki@...xa.com>,
	Dragan Simic <dsimic@...jaro.org>,
	linux-rockchip@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v7 0/3] Add support for Ariaboard Photonicat RK3568


On Tue, 14 Jan 2025 08:14:08 +0800, Junhao Xie wrote:
> Add dts for Ariaboard Photonicat RK3568.
> 
> This series bring support for:
> * Debug UART
> * SDIO QCA9377 WiFi and Bluetooth
> * M.2 E-Key PCIe WiFi and Bluetooth
> * M.2 B-Key USB Modem WWAN
> * Ethernet WAN Port
> * MicroSD Card slot
> * eMMC
> * HDMI Output
> * Mali GPU
> * USB Type-A
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: vendor-prefixes: Add prefix for Ariaboard
      commit: 8d9863487e58434d22dbacb10ad2f9dde326a25c
[2/3] dt-bindings: arm: rockchip: Add Ariaboard Photonicat RK3568
      commit: a81c10aee108d805259dac50c0ac509681c559e8
[3/3] arm64: dts: rockchip: add dts for Ariaboard Photonicat RK3568
      commit: 3834e1009c108a8a834a7e4625dfa805fcb1f71d

As seen by the reply from Rob's bot, there were some minor issues, that
I fixed myself:

- dropped clock-names from bluetooth node
- dropped reset-gpios from rfkill node
- dropped phy-supply from pcie-phy
  with vcc3v3_pcie marked as being supplied by vcc3v3_pi6c, all supplies
  should still be enabled nevertheless

Best regards,
-- 
Heiko Stuebner <heiko@...ech.de>