linux-kernel - Re: [PATCH 2/4] reset: simple: add support generic reset-simple device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250213-laughing-oarfish-of-opportunity-a575c5@krzk-bin>
Date: Thu, 13 Feb 2025 10:36:14 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Inochi Amaoto <inochiama@...il.com>
Cc: Philipp Zabel <p.zabel@...gutronix.de>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, 
	Chen Wang <unicorn_wang@...look.com>, Paul Walmsley <paul.walmsley@...ive.com>, 
	Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>, Guo Ren <guoren@...nel.org>, 
	Uwe Kleine-König <u.kleine-koenig@...libre.com>, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
	sophgo@...ts.linux.dev, linux-riscv@...ts.infradead.org, Yixun Lan <dlan@...too.org>, 
	Longbin Li <looong.bin@...il.com>
Subject: Re: [PATCH 2/4] reset: simple: add support generic reset-simple
 device

On Thu, Feb 13, 2025 at 10:08:55AM +0800, Inochi Amaoto wrote:
> Add support for generic bit reset device.
> 
> Signed-off-by: Inochi Amaoto <inochiama@...il.com>
> ---
>  drivers/reset/reset-simple.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
> index 276067839830..a24f8fcc6a06 100644
> --- a/drivers/reset/reset-simple.c
> +++ b/drivers/reset/reset-simple.c
> @@ -148,6 +148,9 @@ static const struct of_device_id reset_simple_dt_ids[] = {
>  		.data = &reset_simple_active_low },
>  	{ .compatible = "brcm,bcm4908-misc-pcie-reset",
>  		.data = &reset_simple_active_low },
> +	{ .compatible = "reset-simple-high" },
> +	{ .compatible = "reset-simple-low",
> +		.data = &reset_simple_active_low },

So what is the point of the binding?

Best regards,
Krzysztof