| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250214114708.28947-2-dpenkler@gmail.com>
Date: Fri, 14 Feb 2025 12:46:52 +0100
From: Dave Penkler <dpenkler@...il.com>
To: gregkh@...uxfoundation.org,
linux-staging@...ts.linux.dev,
linux-kernel@...r.kernel.org
Cc: Dave Penkler <dpenkler@...il.com>
Subject: [PATCH 01/17] staging: gpib: agilent pci console messaging cleanup
Remove dev_err messages on interrupted or timed-out
reads and writes. User land code can figure out what
went wrong with the errno return.
Return -ENODEV instead of -1 on attach failure when
no board is found.
Delete commented out console messages.
Use module name in pr_xxx and dev_xxx messages.
Remove const char * definition of driver_name and
extern definition in .h file.
Use DRV_NAME defined as KBUILD_MODNAME instead.
Remove driver_name parameter and agilent_82350b string prefix
in dev_xxx messages.
Use DRV_NAME instead of driver_name in pci_request_regions.
Use DRV_NAME instead of hard coded string in the pci_driver struct.
Change select dev_info's to dev_dbg.
Change pr_err to dev_err where possible.
Signed-off-by: Dave Penkler <dpenkler@...il.com>
---
.../gpib/agilent_82350b/agilent_82350b.c | 118 ++++++------------
.../gpib/agilent_82350b/agilent_82350b.h | 3 -
2 files changed, 40 insertions(+), 81 deletions(-)
diff --git a/drivers/staging/gpib/agilent_82350b/agilent_82350b.c b/drivers/staging/gpib/agilent_82350b/agilent_82350b.c
index 5c62ec24fced..f83e1f321561 100644
--- a/drivers/staging/gpib/agilent_82350b/agilent_82350b.c
+++ b/drivers/staging/gpib/agilent_82350b/agilent_82350b.c
@@ -4,6 +4,10 @@
* copyright : (C) 2002, 2004 by Frank Mori Hess *
***************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define dev_fmt pr_fmt
+#define DRV_NAME KBUILD_MODNAME
+
#include "agilent_82350b.h"
#include <linux/delay.h>
#include <linux/ioport.h>
@@ -54,9 +58,6 @@ static int agilent_82350b_accel_read(gpib_board_t *board, uint8_t *buffer, size_
retval = tms9914_read(board, tms_priv, buffer, 1, end, &num_bytes);
*bytes_read += num_bytes;
- if (retval < 0)
- dev_err(board->gpib_dev, "%s: tms9914_read failed retval=%i\n",
- driver_name, retval);
if (retval < 0 || *end)
return retval;
++buffer;
@@ -89,7 +90,6 @@ static int agilent_82350b_accel_read(gpib_board_t *board, uint8_t *buffer, size_
test_bit(DEV_CLEAR_BN, &tms_priv->state) ||
test_bit(TIMO_NUM, &board->status));
if (retval) {
- dev_dbg(board->gpib_dev, "%s: read wait interrupted\n", driver_name);
retval = -ERESTARTSYS;
break;
}
@@ -103,13 +103,10 @@ static int agilent_82350b_accel_read(gpib_board_t *board, uint8_t *buffer, size_
*end = 1;
}
if (test_bit(TIMO_NUM, &board->status)) {
- dev_err(board->gpib_dev, "%s: read timed out\n", driver_name);
retval = -ETIMEDOUT;
break;
}
if (test_bit(DEV_CLEAR_BN, &tms_priv->state)) {
- dev_err(board->gpib_dev, "%s: device clear interrupted read\n",
- driver_name);
retval = -EINTR;
break;
}
@@ -139,18 +136,12 @@ static int translate_wait_return_value(gpib_board_t *board, int retval)
struct agilent_82350b_priv *a_priv = board->private_data;
struct tms9914_priv *tms_priv = &a_priv->tms9914_priv;
- if (retval) {
- dev_err(board->gpib_dev, "%s: write wait interrupted\n", driver_name);
+ if (retval)
return -ERESTARTSYS;
- }
- if (test_bit(TIMO_NUM, &board->status)) {
- dev_err(board->gpib_dev, "%s: write timed out\n", driver_name);
+ if (test_bit(TIMO_NUM, &board->status))
return -ETIMEDOUT;
- }
- if (test_bit(DEV_CLEAR_BN, &tms_priv->state)) {
- dev_err(board->gpib_dev, "%s: device clear interrupted write\n", driver_name);
+ if (test_bit(DEV_CLEAR_BN, &tms_priv->state))
return -EINTR;
- }
return 0;
}
@@ -176,10 +167,8 @@ static int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size
event_status = read_and_clear_event_status(board);
- //pr_info("ag_ac_wr: event status 0x%x tms state 0x%lx\n", event_status, tms_priv->state);
-
#ifdef EXPERIMENTAL
- pr_info("ag_ac_wr: wait for previous BO to complete if any\n");
+ // wait for previous BO to complete if any
retval = wait_event_interruptible(board->wait,
test_bit(DEV_CLEAR_BN, &tms_priv->state) ||
test_bit(WRITE_READY_BN, &tms_priv->state) ||
@@ -190,14 +179,11 @@ static int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size
return retval;
#endif
- //pr_info("ag_ac_wr: sending first byte\n");
retval = agilent_82350b_write(board, buffer, 1, 0, &num_bytes);
*bytes_written += num_bytes;
if (retval < 0)
return retval;
- //pr_info("ag_ac_wr: %ld bytes eoi %d tms state 0x%lx\n",length, send_eoi, tms_priv->state);
-
write_byte(tms_priv, tms_priv->imr0_bits & ~HR_BOIE, IMR0);
for (i = 1; i < fifotransferlength;) {
clear_bit(WRITE_READY_BN, &tms_priv->state);
@@ -210,13 +196,8 @@ static int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size
}
writeb(ENABLE_TI_TO_SRAM, a_priv->gpib_base + SRAM_ACCESS_CONTROL_REG);
- //pr_info("ag_ac_wr: send block: %d bytes tms 0x%lx\n", block_size,
- // tms_priv->state);
-
- if (agilent_82350b_fifo_is_halted(a_priv)) {
+ if (agilent_82350b_fifo_is_halted(a_priv))
writeb(RESTART_STREAM_BIT, a_priv->gpib_base + STREAM_STATUS_REG);
- // pr_info("ag_ac_wr: needed restart\n");
- }
retval = wait_event_interruptible(board->wait,
((event_status =
@@ -226,7 +207,6 @@ static int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size
test_bit(TIMO_NUM, &board->status));
writeb(0, a_priv->gpib_base + SRAM_ACCESS_CONTROL_REG);
num_bytes = block_size - read_transfer_counter(a_priv);
- //pr_info("ag_ac_wr: sent %ld bytes tms 0x%lx\n", num_bytes, tms_priv->state);
*bytes_written += num_bytes;
retval = translate_wait_return_value(board, retval);
@@ -238,9 +218,6 @@ static int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size
return retval;
if (send_eoi) {
- //pr_info("ag_ac_wr: sending last byte with eoi byte no: %d\n",
- // fifotransferlength+1);
-
retval = agilent_82350b_write(board, buffer + fifotransferlength, 1, send_eoi,
&num_bytes);
*bytes_written += num_bytes;
@@ -284,7 +261,6 @@ static irqreturn_t agilent_82350b_interrupt(int irq, void *arg)
tms9914_interrupt_have_status(board, &a_priv->tms9914_priv, tms9914_status1,
tms9914_status2);
}
-//pr_info("event_status=0x%x s1 %x s2 %x\n", event_status,tms9914_status1,tms9914_status2);
//write-clear status bits
if (event_status & (BUFFER_END_STATUS_BIT | TERM_COUNT_STATUS_BIT)) {
writeb(event_status & (BUFFER_END_STATUS_BIT | TERM_COUNT_STATUS_BIT),
@@ -298,8 +274,6 @@ static irqreturn_t agilent_82350b_interrupt(int irq, void *arg)
static void agilent_82350b_detach(gpib_board_t *board);
-const char *driver_name = "agilent_82350b";
-
static int read_transfer_counter(struct agilent_82350b_priv *a_priv)
{
int lo, mid, value;
@@ -536,11 +510,10 @@ static int init_82350a_hardware(gpib_board_t *board, const gpib_board_config_t *
return 0;
// need to programme borg
if (!config->init_data || config->init_data_length != firmware_length) {
- dev_err(board->gpib_dev, "%s: the 82350A board requires firmware after powering on.\n",
- driver_name);
+ dev_err(board->gpib_dev, "the 82350A board requires firmware after powering on.\n");
return -EIO;
}
- dev_info(board->gpib_dev, "%s: Loading firmware...\n", driver_name);
+ dev_dbg(board->gpib_dev, "Loading firmware...\n");
// tickle the borg
writel(plx_cntrl_static_bits | PLX9050_USER3_DATA_BIT,
@@ -559,7 +532,7 @@ static int init_82350a_hardware(gpib_board_t *board, const gpib_board_config_t *
usleep_range(10, 20);
}
if (j == timeout) {
- dev_err(board->gpib_dev, "%s: timed out loading firmware.\n", driver_name);
+ dev_err(board->gpib_dev, "timed out loading firmware.\n");
return -ETIMEDOUT;
}
writeb(firmware_data[i], a_priv->gpib_base + CONFIG_DATA_REG);
@@ -570,11 +543,10 @@ static int init_82350a_hardware(gpib_board_t *board, const gpib_board_config_t *
usleep_range(10, 20);
}
if (j == timeout) {
- dev_err(board->gpib_dev, "%s: timed out waiting for firmware load to complete.\n",
- driver_name);
+ dev_err(board->gpib_dev, "timed out waiting for firmware load to complete.\n");
return -ETIMEDOUT;
}
- dev_info(board->gpib_dev, "%s: ...done.\n", driver_name);
+ dev_dbg(board->gpib_dev, " ...done.\n");
return 0;
}
@@ -596,15 +568,14 @@ static int test_sram(gpib_board_t *board)
unsigned int read_value = readb(a_priv->sram_base + i);
if ((i & byte_mask) != read_value) {
- dev_err(board->gpib_dev, "%s: SRAM test failed at %d wanted %d got %d\n",
- driver_name, i, (i & byte_mask), read_value);
+ dev_err(board->gpib_dev, "SRAM test failed at %d wanted %d got %d\n",
+ i, (i & byte_mask), read_value);
return -EIO;
}
if (need_resched())
schedule();
}
- dev_info(board->gpib_dev, "%s: SRAM test passed 0x%x bytes checked\n",
- driver_name, sram_length);
+ dev_dbg(board->gpib_dev, "SRAM test passed 0x%x bytes checked\n", sram_length);
return 0;
}
@@ -632,14 +603,14 @@ static int agilent_82350b_generic_attach(gpib_board_t *board, const gpib_board_c
PCI_DEVICE_ID_82350B, NULL);
if (a_priv->pci_device) {
a_priv->model = MODEL_82350B;
- dev_info(board->gpib_dev, "%s: Agilent 82350B board found\n", driver_name);
+ dev_dbg(board->gpib_dev, "Agilent 82350B board found\n");
} else {
a_priv->pci_device = gpib_pci_get_device(config, PCI_VENDOR_ID_AGILENT,
PCI_DEVICE_ID_82351A, NULL);
if (a_priv->pci_device) {
a_priv->model = MODEL_82351A;
- dev_info(board->gpib_dev, "%s: Agilent 82351B board found\n", driver_name);
+ dev_dbg(board->gpib_dev, "Agilent 82351B board found\n");
} else {
a_priv->pci_device = gpib_pci_get_subsys(config, PCI_VENDOR_ID_PLX,
@@ -649,46 +620,40 @@ static int agilent_82350b_generic_attach(gpib_board_t *board, const gpib_board_c
a_priv->pci_device);
if (a_priv->pci_device) {
a_priv->model = MODEL_82350A;
- dev_info(board->gpib_dev, "%s: HP/Agilent 82350A board found\n",
- driver_name);
+ dev_dbg(board->gpib_dev, "HP/Agilent 82350A board found\n");
} else {
- dev_err(board->gpib_dev, "%s: no 82350/82351 board found\n",
- driver_name);
+ dev_err(board->gpib_dev, "no 82350/82351 board found\n");
return -ENODEV;
}
}
}
if (pci_enable_device(a_priv->pci_device)) {
- dev_err(board->gpib_dev, "%s: error enabling pci device\n", driver_name);
+ dev_err(board->gpib_dev, "error enabling pci device\n");
return -EIO;
}
- if (pci_request_regions(a_priv->pci_device, driver_name))
- return -EIO;
+ if (pci_request_regions(a_priv->pci_device, DRV_NAME))
+ return -ENOMEM;
switch (a_priv->model) {
case MODEL_82350A:
a_priv->plx_base = ioremap(pci_resource_start(a_priv->pci_device, PLX_MEM_REGION),
pci_resource_len(a_priv->pci_device, PLX_MEM_REGION));
- dev_dbg(board->gpib_dev, "%s: plx base address remapped to 0x%p\n",
- driver_name, a_priv->plx_base);
+ dev_dbg(board->gpib_dev, "plx base address remapped to 0x%p\n", a_priv->plx_base);
a_priv->gpib_base = ioremap(pci_resource_start(a_priv->pci_device,
GPIB_82350A_REGION),
pci_resource_len(a_priv->pci_device,
GPIB_82350A_REGION));
- dev_dbg(board->gpib_dev, "%s: gpib base address remapped to 0x%p\n",
- driver_name, a_priv->gpib_base);
+ dev_dbg(board->gpib_dev, "chip base address remapped to 0x%p\n", a_priv->gpib_base);
tms_priv->mmiobase = a_priv->gpib_base + TMS9914_BASE_REG;
a_priv->sram_base = ioremap(pci_resource_start(a_priv->pci_device,
SRAM_82350A_REGION),
pci_resource_len(a_priv->pci_device,
SRAM_82350A_REGION));
- dev_dbg(board->gpib_dev, "%s: sram base address remapped to 0x%p\n",
- driver_name, a_priv->sram_base);
+ dev_dbg(board->gpib_dev, "sram base address remapped to 0x%p\n", a_priv->sram_base);
a_priv->borg_base = ioremap(pci_resource_start(a_priv->pci_device,
BORG_82350A_REGION),
pci_resource_len(a_priv->pci_device,
BORG_82350A_REGION));
- dev_dbg(board->gpib_dev, "%s: borg base address remapped to 0x%p\n",
- driver_name, a_priv->borg_base);
+ dev_dbg(board->gpib_dev, "borg base address remapped to 0x%p\n", a_priv->borg_base);
retval = init_82350a_hardware(board, config);
if (retval < 0)
@@ -698,21 +663,18 @@ static int agilent_82350b_generic_attach(gpib_board_t *board, const gpib_board_c
case MODEL_82351A:
a_priv->gpib_base = ioremap(pci_resource_start(a_priv->pci_device, GPIB_REGION),
pci_resource_len(a_priv->pci_device, GPIB_REGION));
- dev_dbg(board->gpib_dev, "%s: gpib base address remapped to 0x%p\n",
- driver_name, a_priv->gpib_base);
+ dev_dbg(board->gpib_dev, "chip base address remapped to 0x%p\n", a_priv->gpib_base);
tms_priv->mmiobase = a_priv->gpib_base + TMS9914_BASE_REG;
a_priv->sram_base = ioremap(pci_resource_start(a_priv->pci_device, SRAM_REGION),
pci_resource_len(a_priv->pci_device, SRAM_REGION));
- dev_dbg(board->gpib_dev, "%s: sram base address remapped to 0x%p\n",
- driver_name, a_priv->sram_base);
+ dev_dbg(board->gpib_dev, "sram base address remapped to 0x%p\n", a_priv->sram_base);
a_priv->misc_base = ioremap(pci_resource_start(a_priv->pci_device, MISC_REGION),
pci_resource_len(a_priv->pci_device, MISC_REGION));
- dev_dbg(board->gpib_dev, "%s: misc base address remapped to 0x%p\n",
- driver_name, a_priv->misc_base);
+ dev_dbg(board->gpib_dev, "misc base address remapped to 0x%p\n", a_priv->misc_base);
break;
default:
- pr_err("%s: invalid board\n", driver_name);
- return -1;
+ dev_err(board->gpib_dev, "invalid board\n");
+ return -ENODEV;
}
retval = test_sram(board);
@@ -720,12 +682,12 @@ static int agilent_82350b_generic_attach(gpib_board_t *board, const gpib_board_c
return retval;
if (request_irq(a_priv->pci_device->irq, agilent_82350b_interrupt,
- IRQF_SHARED, driver_name, board)) {
- pr_err("%s: can't request IRQ %d\n", driver_name, a_priv->pci_device->irq);
+ IRQF_SHARED, DRV_NAME, board)) {
+ dev_err(board->gpib_dev, "failed to obtain irq %d\n", a_priv->pci_device->irq);
return -EIO;
}
a_priv->irq = a_priv->pci_device->irq;
- dev_dbg(board->gpib_dev, "%s: IRQ %d\n", driver_name, a_priv->irq);
+ dev_dbg(board->gpib_dev, " IRQ %d\n", a_priv->irq);
writeb(0, a_priv->gpib_base + SRAM_ACCESS_CONTROL_REG);
a_priv->card_mode_bits = ENABLE_PCI_IRQ_BIT;
@@ -873,7 +835,7 @@ static const struct pci_device_id agilent_82350b_pci_table[] = {
MODULE_DEVICE_TABLE(pci, agilent_82350b_pci_table);
static struct pci_driver agilent_82350b_pci_driver = {
- .name = "agilent_82350b",
+ .name = DRV_NAME,
.id_table = agilent_82350b_pci_table,
.probe = &agilent_82350b_pci_probe
};
@@ -884,19 +846,19 @@ static int __init agilent_82350b_init_module(void)
result = pci_register_driver(&agilent_82350b_pci_driver);
if (result) {
- pr_err("agilent_82350b: pci_register_driver failed: error = %d\n", result);
+ pr_err("pci_register_driver failed: error = %d\n", result);
return result;
}
result = gpib_register_driver(&agilent_82350b_unaccel_interface, THIS_MODULE);
if (result) {
- pr_err("agilent_82350b: gpib_register_driver failed: error = %d\n", result);
+ pr_err("gpib_register_driver failed: error = %d\n", result);
goto err_unaccel;
}
result = gpib_register_driver(&agilent_82350b_interface, THIS_MODULE);
if (result) {
- pr_err("agilent_82350b: gpib_register_driver failed: error = %d\n", result);
+ pr_err("gpib_register_driver failed: error = %d\n", result);
goto err_interface;
}
diff --git a/drivers/staging/gpib/agilent_82350b/agilent_82350b.h b/drivers/staging/gpib/agilent_82350b/agilent_82350b.h
index 8b96ad12647e..1573230c619d 100644
--- a/drivers/staging/gpib/agilent_82350b/agilent_82350b.h
+++ b/drivers/staging/gpib/agilent_82350b/agilent_82350b.h
@@ -57,9 +57,6 @@ struct agilent_82350b_priv {
bool using_fifos;
};
-// driver name
-extern const char *driver_name;
-
//registers
enum agilent_82350b_gpib_registers
--
2.48.1
Powered by blists - more mailing lists