| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250214114708.28947-3-dpenkler@gmail.com>
Date: Fri, 14 Feb 2025 12:46:53 +0100
From: Dave Penkler <dpenkler@...il.com>
To: gregkh@...uxfoundation.org,
linux-staging@...ts.linux.dev,
linux-kernel@...r.kernel.org
Cc: Dave Penkler <dpenkler@...il.com>
Subject: [PATCH 02/17] staging: gpib: agilent usb console messaging cleanup
Enable module name to be printed in pr_xxx and dev_xxx
Use DRV_NAME defined as KBUILD_MODNAME instead of hard coded
string in usb_driver struct.
Remove __func__ parameter in dev_dbg messages as this can be
enabled with dynamic debug.
Remove __func__ parameter in dev_err messages as they are not
needed. The module name is sufficient.
Change pr_info to dev_dbg where needed and remove the rest
where possible.
Remove test and error messages for buffer over run in write and
read_registers as these are just trying to catch bugs in the driver.
Remove agilent_82357a string prefix in error messages.
Return -EIO for too many reads in read_registers instead of
continuing after printing an error message.
Change pr_warn to dev_warn.
Remove warning on calls for unsupported functionality.
Remove test and message for buffer overflow in agilent_82357_init
and agilent_82357a_go_idle which are just checking for a driver bug.
Use actual indeces in the array instead of i and then incrementing
i so that the code is clear and there is no need to check for
overflow or print a message.
Signed-off-by: Dave Penkler <dpenkler@...il.com>
---
.../gpib/agilent_82357a/agilent_82357a.c | 359 +++++++-----------
1 file changed, 143 insertions(+), 216 deletions(-)
diff --git a/drivers/staging/gpib/agilent_82357a/agilent_82357a.c b/drivers/staging/gpib/agilent_82357a/agilent_82357a.c
index 69f0e490d401..7ebebe00dc48 100644
--- a/drivers/staging/gpib/agilent_82357a/agilent_82357a.c
+++ b/drivers/staging/gpib/agilent_82357a/agilent_82357a.c
@@ -7,6 +7,10 @@
#define _GNU_SOURCE
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define dev_fmt pr_fmt
+#define DRV_NAME KBUILD_MODNAME
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -79,14 +83,12 @@ static int agilent_82357a_send_bulk_msg(struct agilent_82357a_priv *a_priv, void
retval = usb_submit_urb(a_priv->bulk_urb, GFP_KERNEL);
if (retval) {
- dev_err(&usb_dev->dev, "%s: failed to submit bulk out urb, retval=%i\n",
- __func__, retval);
+ dev_err(&usb_dev->dev, "failed to submit bulk out urb, retval=%i\n", retval);
mutex_unlock(&a_priv->bulk_alloc_lock);
goto cleanup;
}
mutex_unlock(&a_priv->bulk_alloc_lock);
if (down_interruptible(&context->complete)) {
- dev_err(&usb_dev->dev, "%s: interrupted\n", __func__);
retval = -ERESTARTSYS;
goto cleanup;
}
@@ -149,14 +151,12 @@ static int agilent_82357a_receive_bulk_msg(struct agilent_82357a_priv *a_priv, v
retval = usb_submit_urb(a_priv->bulk_urb, GFP_KERNEL);
if (retval) {
- dev_err(&usb_dev->dev, "%s: failed to submit bulk out urb, retval=%i\n",
- __func__, retval);
+ dev_err(&usb_dev->dev, "failed to submit bulk in urb, retval=%i\n", retval);
mutex_unlock(&a_priv->bulk_alloc_lock);
goto cleanup;
}
mutex_unlock(&a_priv->bulk_alloc_lock);
if (down_interruptible(&context->complete)) {
- dev_err(&usb_dev->dev, "%s: interrupted\n", __func__);
retval = -ERESTARTSYS;
goto cleanup;
}
@@ -205,7 +205,6 @@ static int agilent_82357a_receive_control_msg(struct agilent_82357a_priv *a_priv
static void agilent_82357a_dump_raw_block(const u8 *raw_data, int length)
{
- pr_info("hex block dump\n");
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 8, 1, raw_data, length, true);
}
@@ -225,7 +224,7 @@ static int agilent_82357a_write_registers(struct agilent_82357a_priv *a_priv,
static const int max_writes = 31;
if (num_writes > max_writes) {
- dev_err(&usb_dev->dev, "%s: bug! num_writes=%i too large\n", __func__, num_writes);
+ dev_err(&usb_dev->dev, "bug! num_writes=%i too large\n", num_writes);
return -EIO;
}
out_data_length = num_writes * bytes_per_write + header_length;
@@ -239,8 +238,7 @@ static int agilent_82357a_write_registers(struct agilent_82357a_priv *a_priv,
out_data[i++] = writes[j].address;
out_data[i++] = writes[j].value;
}
- if (i > out_data_length)
- dev_err(&usb_dev->dev, "%s: bug! buffer overrun\n", __func__);
+
retval = mutex_lock_interruptible(&a_priv->bulk_transfer_lock);
if (retval) {
kfree(out_data);
@@ -249,8 +247,8 @@ static int agilent_82357a_write_registers(struct agilent_82357a_priv *a_priv,
retval = agilent_82357a_send_bulk_msg(a_priv, out_data, i, &bytes_written, 1000);
kfree(out_data);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_send_bulk_msg returned %i, bytes_written=%i, i=%i\n",
- __func__, retval, bytes_written, i);
+ dev_err(&usb_dev->dev, "send_bulk_msg returned %i, bytes_written=%i, i=%i\n",
+ retval, bytes_written, i);
mutex_unlock(&a_priv->bulk_transfer_lock);
return retval;
}
@@ -265,20 +263,19 @@ static int agilent_82357a_write_registers(struct agilent_82357a_priv *a_priv,
mutex_unlock(&a_priv->bulk_transfer_lock);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_receive_bulk_msg returned %i, bytes_read=%i\n",
- __func__, retval, bytes_read);
+ dev_err(&usb_dev->dev, "receive_bulk_msg returned %i, bytes_read=%i\n",
+ retval, bytes_read);
agilent_82357a_dump_raw_block(in_data, bytes_read);
kfree(in_data);
return -EIO;
}
if (in_data[0] != (0xff & ~DATA_PIPE_CMD_WR_REGS)) {
- dev_err(&usb_dev->dev, "%s: error, bulk command=0x%x != ~DATA_PIPE_CMD_WR_REGS\n",
- __func__, in_data[0]);
+ dev_err(&usb_dev->dev, "bulk command=0x%x != ~DATA_PIPE_CMD_WR_REGS\n", in_data[0]);
return -EIO;
}
if (in_data[1]) {
- dev_err(&usb_dev->dev, "%s: nonzero error code 0x%x in DATA_PIPE_CMD_WR_REGS response\n",
- __func__, in_data[1]);
+ dev_err(&usb_dev->dev, "nonzero error code 0x%x in DATA_PIPE_CMD_WR_REGS response\n",
+ in_data[1]);
return -EIO;
}
kfree(in_data);
@@ -299,9 +296,10 @@ static int agilent_82357a_read_registers(struct agilent_82357a_priv *a_priv,
static const int header_length = 2;
static const int max_reads = 62;
- if (num_reads > max_reads)
- dev_err(&usb_dev->dev, "%s: bug! num_reads=%i too large\n", __func__, num_reads);
-
+ if (num_reads > max_reads) {
+ dev_err(&usb_dev->dev, "bug! num_reads=%i too large\n", num_reads);
+ return -EIO;
+ }
out_data_length = num_reads + header_length;
out_data = kmalloc(out_data_length, GFP_KERNEL);
if (!out_data)
@@ -311,8 +309,7 @@ static int agilent_82357a_read_registers(struct agilent_82357a_priv *a_priv,
out_data[i++] = num_reads;
for (j = 0; j < num_reads; j++)
out_data[i++] = reads[j].address;
- if (i > out_data_length)
- dev_err(&usb_dev->dev, "%s: bug! buffer overrun\n", __func__);
+
if (blocking) {
retval = mutex_lock_interruptible(&a_priv->bulk_transfer_lock);
if (retval) {
@@ -329,8 +326,8 @@ static int agilent_82357a_read_registers(struct agilent_82357a_priv *a_priv,
retval = agilent_82357a_send_bulk_msg(a_priv, out_data, i, &bytes_written, 1000);
kfree(out_data);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_send_bulk_msg returned %i, bytes_written=%i, i=%i\n",
- __func__, retval, bytes_written, i);
+ dev_err(&usb_dev->dev, "send_bulk_msg returned %i, bytes_written=%i, i=%i\n",
+ retval, bytes_written, i);
mutex_unlock(&a_priv->bulk_transfer_lock);
return retval;
}
@@ -345,21 +342,20 @@ static int agilent_82357a_read_registers(struct agilent_82357a_priv *a_priv,
mutex_unlock(&a_priv->bulk_transfer_lock);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_receive_bulk_msg returned %i, bytes_read=%i\n",
- __func__, retval, bytes_read);
+ dev_err(&usb_dev->dev, "receive_bulk_msg returned %i, bytes_read=%i\n",
+ retval, bytes_read);
agilent_82357a_dump_raw_block(in_data, bytes_read);
kfree(in_data);
return -EIO;
}
i = 0;
if (in_data[i++] != (0xff & ~DATA_PIPE_CMD_RD_REGS)) {
- dev_err(&usb_dev->dev, "%s: error, bulk command=0x%x != ~DATA_PIPE_CMD_RD_REGS\n",
- __func__, in_data[0]);
+ dev_err(&usb_dev->dev, "bulk command=0x%x != ~DATA_PIPE_CMD_RD_REGS\n", in_data[0]);
return -EIO;
}
if (in_data[i++]) {
- dev_err(&usb_dev->dev, "%s: nonzero error code 0x%x in DATA_PIPE_CMD_RD_REGS response\n",
- __func__, in_data[1]);
+ dev_err(&usb_dev->dev, "nonzero error code 0x%x in DATA_PIPE_CMD_RD_REGS response\n",
+ in_data[1]);
return -EIO;
}
for (j = 0; j < num_reads; j++)
@@ -390,14 +386,13 @@ static int agilent_82357a_abort(struct agilent_82357a_priv *a_priv, int flush)
wIndex, status_data,
status_data_len, 100);
if (receive_control_retval < 0) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_receive_control_msg() returned %i\n",
- __func__, receive_control_retval);
+ dev_err(&usb_dev->dev, "82357a_receive_control_msg() returned %i\n",
+ receive_control_retval);
retval = -EIO;
goto cleanup;
}
if (status_data[0] != (~XFER_ABORT & 0xff)) {
- dev_err(&usb_dev->dev, "%s: error, major code=0x%x != ~XFER_ABORT\n",
- __func__, status_data[0]);
+ dev_err(&usb_dev->dev, "major code=0x%x != ~XFER_ABORT\n", status_data[0]);
retval = -EIO;
goto cleanup;
}
@@ -413,8 +408,7 @@ static int agilent_82357a_abort(struct agilent_82357a_priv *a_priv, int flush)
fallthrough;
case UGP_ERR_FLUSHING_ALREADY:
default:
- dev_err(&usb_dev->dev, "%s: abort returned error code=0x%x\n",
- __func__, status_data[1]);
+ dev_err(&usb_dev->dev, "abort returned error code=0x%x\n", status_data[1]);
retval = -EIO;
break;
}
@@ -469,8 +463,8 @@ static int agilent_82357a_read(gpib_board_t *board, uint8_t *buffer, size_t leng
retval = agilent_82357a_send_bulk_msg(a_priv, out_data, i, &bytes_written, msec_timeout);
kfree(out_data);
if (retval || bytes_written != i) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_send_bulk_msg returned %i, bytes_written=%i, i=%i\n",
- __func__, retval, bytes_written, i);
+ dev_err(&usb_dev->dev, "send_bulk_msg returned %i, bytes_written=%i, i=%i\n",
+ retval, bytes_written, i);
mutex_unlock(&a_priv->bulk_transfer_lock);
if (retval < 0)
return retval;
@@ -501,19 +495,19 @@ static int agilent_82357a_read(gpib_board_t *board, uint8_t *buffer, size_t leng
&extra_bytes_read, 100);
bytes_read += extra_bytes_read;
if (extra_bytes_retval) {
- dev_err(&usb_dev->dev, "%s: extra_bytes_retval=%i, bytes_read=%i\n",
- __func__, extra_bytes_retval, bytes_read);
+ dev_err(&usb_dev->dev, "extra_bytes_retval=%i, bytes_read=%i\n",
+ extra_bytes_retval, bytes_read);
agilent_82357a_abort(a_priv, 0);
}
} else if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_receive_bulk_msg returned %i, bytes_read=%i\n",
- __func__, retval, bytes_read);
+ dev_err(&usb_dev->dev, "receive_bulk_msg returned %i, bytes_read=%i\n",
+ retval, bytes_read);
agilent_82357a_abort(a_priv, 0);
}
mutex_unlock(&a_priv->bulk_transfer_lock);
if (bytes_read > length + 1) {
bytes_read = length + 1;
- pr_warn("%s: bytes_read > length? truncating", __func__);
+ dev_warn(&usb_dev->dev, "bytes_read > length? truncating");
}
if (bytes_read >= 1) {
@@ -584,8 +578,8 @@ static ssize_t agilent_82357a_generic_write(gpib_board_t *board, uint8_t *buffer
kfree(out_data);
if (retval || raw_bytes_written != i) {
agilent_82357a_abort(a_priv, 0);
- dev_err(&usb_dev->dev, "%s: agilent_82357a_send_bulk_msg returned %i, raw_bytes_written=%i, i=%i\n",
- __func__, retval, raw_bytes_written, i);
+ dev_err(&usb_dev->dev, "send_bulk_msg returned %i, raw_bytes_written=%i, i=%i\n",
+ retval, raw_bytes_written, i);
mutex_unlock(&a_priv->bulk_transfer_lock);
if (retval < 0)
return retval;
@@ -597,7 +591,7 @@ static ssize_t agilent_82357a_generic_write(gpib_board_t *board, uint8_t *buffer
&a_priv->interrupt_flags) ||
test_bit(TIMO_NUM, &board->status));
if (retval) {
- dev_err(&usb_dev->dev, "%s: wait write complete interrupted\n", __func__);
+ dev_dbg(&usb_dev->dev, "wait write complete interrupted\n");
agilent_82357a_abort(a_priv, 0);
mutex_unlock(&a_priv->bulk_transfer_lock);
return -ERESTARTSYS;
@@ -614,8 +608,7 @@ static ssize_t agilent_82357a_generic_write(gpib_board_t *board, uint8_t *buffer
read_reg.address = BSR;
retval = agilent_82357a_read_registers(a_priv, &read_reg, 1, 1);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "read_registers() returned error\n");
return -ETIMEDOUT;
}
@@ -632,8 +625,7 @@ static ssize_t agilent_82357a_generic_write(gpib_board_t *board, uint8_t *buffer
read_reg.address = ADSR;
retval = agilent_82357a_read_registers(a_priv, &read_reg, 1, 1);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "read_registers() returned error\n");
return -ETIMEDOUT;
}
adsr = read_reg.value;
@@ -659,8 +651,7 @@ static ssize_t agilent_82357a_generic_write(gpib_board_t *board, uint8_t *buffer
100);
mutex_unlock(&a_priv->bulk_transfer_lock);
if (retval < 0) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_receive_control_msg() returned %i\n",
- __func__, retval);
+ dev_err(&usb_dev->dev, "receive_control_msg() returned %i\n", retval);
kfree(status_data);
return -EIO;
}
@@ -699,8 +690,7 @@ int agilent_82357a_take_control_internal(gpib_board_t *board, int synchronous)
write.value = AUX_TCA;
retval = agilent_82357a_write_registers(a_priv, &write, 1);
if (retval)
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
return retval;
}
@@ -741,8 +731,7 @@ static int agilent_82357a_go_to_standby(gpib_board_t *board)
write.value = AUX_GTS;
retval = agilent_82357a_write_registers(a_priv, &write, 1);
if (retval)
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
return 0;
}
@@ -771,8 +760,7 @@ static void agilent_82357a_request_system_control(gpib_board_t *board, int reque
++i;
retval = agilent_82357a_write_registers(a_priv, writes, i);
if (retval)
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
return;// retval;
}
@@ -791,8 +779,7 @@ static void agilent_82357a_interface_clear(gpib_board_t *board, int assert)
}
retval = agilent_82357a_write_registers(a_priv, &write, 1);
if (retval)
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
}
static void agilent_82357a_remote_enable(gpib_board_t *board, int enable)
@@ -808,8 +795,7 @@ static void agilent_82357a_remote_enable(gpib_board_t *board, int enable)
write.value |= AUX_CS;
retval = agilent_82357a_write_registers(a_priv, &write, 1);
if (retval)
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
a_priv->ren_state = enable;
return;// 0;
}
@@ -818,10 +804,9 @@ static int agilent_82357a_enable_eos(gpib_board_t *board, uint8_t eos_byte, int
{
struct agilent_82357a_priv *a_priv = board->private_data;
- if (compare_8_bits == 0) {
- pr_warn("%s: hardware only supports 8-bit EOS compare", __func__);
+ if (compare_8_bits == 0)
return -EOPNOTSUPP;
- }
+
a_priv->eos_char = eos_byte;
a_priv->eos_mode = REOS | BIN;
return 0;
@@ -850,8 +835,7 @@ static unsigned int agilent_82357a_update_status(gpib_board_t *board, unsigned i
retval = agilent_82357a_read_registers(a_priv, &address_status, 1, 0);
if (retval) {
if (retval != -EAGAIN)
- dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "read_registers() returned error\n");
return board->status;
}
// check for remote/local
@@ -883,8 +867,7 @@ static unsigned int agilent_82357a_update_status(gpib_board_t *board, unsigned i
retval = agilent_82357a_read_registers(a_priv, &bus_status, 1, 0);
if (retval) {
if (retval != -EAGAIN)
- dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "read_registers() returned error\n");
return board->status;
}
if (bus_status.value & BSR_SRQ_BIT)
@@ -907,8 +890,7 @@ static int agilent_82357a_primary_address(gpib_board_t *board, unsigned int addr
write.value = address & ADDRESS_MASK;
retval = agilent_82357a_write_registers(a_priv, &write, 1);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
return retval;
}
return retval;
@@ -917,8 +899,8 @@ static int agilent_82357a_primary_address(gpib_board_t *board, unsigned int addr
static int agilent_82357a_secondary_address(gpib_board_t *board, unsigned int address, int enable)
{
if (enable)
- pr_warn("%s: warning: assigning a secondary address not supported\n", __func__);
- return -EOPNOTSUPP;
+ return -EOPNOTSUPP;
+ return 0;
}
static int agilent_82357a_parallel_poll(gpib_board_t *board, uint8_t *result)
@@ -936,16 +918,14 @@ static int agilent_82357a_parallel_poll(gpib_board_t *board, uint8_t *result)
writes[1].value = a_priv->hw_control_bits & ~NOT_PARALLEL_POLL;
retval = agilent_82357a_write_registers(a_priv, writes, 2);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
return retval;
}
udelay(2); //silly, since usb write will take way longer
read.address = CPTR;
retval = agilent_82357a_read_registers(a_priv, &read, 1, 1);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "read_registers() returned error\n");
return retval;
}
*result = read.value;
@@ -956,8 +936,7 @@ static int agilent_82357a_parallel_poll(gpib_board_t *board, uint8_t *result)
writes[1].value = AUX_RPP;
retval = agilent_82357a_write_registers(a_priv, writes, 2);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
return retval;
}
return 0;
@@ -1005,8 +984,7 @@ static int agilent_82357a_line_status(const gpib_board_t *board)
retval = agilent_82357a_read_registers(a_priv, &bus_status, 1, 0);
if (retval) {
if (retval != -EAGAIN)
- dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "read_registers() returned error\n");
return retval;
}
if (bus_status.value & BSR_REN_BIT)
@@ -1055,8 +1033,7 @@ static unsigned int agilent_82357a_t1_delay(gpib_board_t *board, unsigned int na
write.value = nanosec_to_fast_talker_bits(&nanosec);
retval = agilent_82357a_write_registers(a_priv, &write, 1);
if (retval)
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
return nanosec;
}
@@ -1081,7 +1058,7 @@ static void agilent_82357a_interrupt_complete(struct urb *urb)
default: /* other error, resubmit */
retval = usb_submit_urb(a_priv->interrupt_urb, GFP_ATOMIC);
if (retval)
- dev_err(&usb_dev->dev, "%s: failed to resubmit interrupt urb\n", __func__);
+ dev_err(&usb_dev->dev, "failed to resubmit interrupt urb\n");
return;
}
@@ -1097,7 +1074,7 @@ static void agilent_82357a_interrupt_complete(struct urb *urb)
retval = usb_submit_urb(a_priv->interrupt_urb, GFP_ATOMIC);
if (retval)
- dev_err(&usb_dev->dev, "%s: failed to resubmit interrupt urb\n", __func__);
+ dev_err(&usb_dev->dev, "failed to resubmit interrupt urb\n");
}
static int agilent_82357a_setup_urbs(gpib_board_t *board)
@@ -1133,8 +1110,7 @@ static int agilent_82357a_setup_urbs(gpib_board_t *board)
if (retval) {
usb_free_urb(a_priv->interrupt_urb);
a_priv->interrupt_urb = NULL;
- dev_err(&usb_dev->dev, "%s: failed to submit first interrupt urb, retval=%i\n",
- __func__, retval);
+ dev_err(&usb_dev->dev, "failed to submit first interrupt urb, retval=%i\n", retval);
goto setup_exit;
}
mutex_unlock(&a_priv->interrupt_alloc_lock);
@@ -1184,108 +1160,78 @@ static void agilent_82357a_free_private(gpib_board_t *board)
{
kfree(board->private_data);
board->private_data = NULL;
-
}
+#define INIT_NUM_REG_WRITES 18
static int agilent_82357a_init(gpib_board_t *board)
{
struct agilent_82357a_priv *a_priv = board->private_data;
struct usb_device *usb_dev = interface_to_usbdev(a_priv->bus_interface);
struct agilent_82357a_register_pairlet hw_control;
- struct agilent_82357a_register_pairlet writes[0x20];
+ struct agilent_82357a_register_pairlet writes[INIT_NUM_REG_WRITES];
int retval;
- int i;
unsigned int nanosec;
- i = 0;
- writes[i].address = LED_CONTROL;
- writes[i].value = FAIL_LED_ON;
- ++i;
- writes[i].address = RESET_TO_POWERUP;
- writes[i].value = RESET_SPACEBALL;
- ++i;
- retval = agilent_82357a_write_registers(a_priv, writes, i);
+ writes[0].address = LED_CONTROL;
+ writes[0].value = FAIL_LED_ON;
+ writes[1].address = RESET_TO_POWERUP;
+ writes[1].value = RESET_SPACEBALL;
+ retval = agilent_82357a_write_registers(a_priv, writes, 2);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
return -EIO;
}
set_current_state(TASK_INTERRUPTIBLE);
if (schedule_timeout(usec_to_jiffies(2000)))
return -ERESTARTSYS;
- i = 0;
- writes[i].address = AUXCR;
- writes[i].value = AUX_NBAF;
- ++i;
- writes[i].address = AUXCR;
- writes[i].value = AUX_HLDE;
- ++i;
- writes[i].address = AUXCR;
- writes[i].value = AUX_TON;
- ++i;
- writes[i].address = AUXCR;
- writes[i].value = AUX_LON;
- ++i;
- writes[i].address = AUXCR;
- writes[i].value = AUX_RSV2;
- ++i;
- writes[i].address = AUXCR;
- writes[i].value = AUX_INVAL;
- ++i;
- writes[i].address = AUXCR;
- writes[i].value = AUX_RPP;
- ++i;
- writes[i].address = AUXCR;
- writes[i].value = AUX_STDL;
- ++i;
- writes[i].address = AUXCR;
- writes[i].value = AUX_VSTDL;
- ++i;
- writes[i].address = FAST_TALKER_T1;
+ writes[0].address = AUXCR;
+ writes[0].value = AUX_NBAF;
+ writes[1].address = AUXCR;
+ writes[1].value = AUX_HLDE;
+ writes[2].address = AUXCR;
+ writes[2].value = AUX_TON;
+ writes[3].address = AUXCR;
+ writes[3].value = AUX_LON;
+ writes[4].address = AUXCR;
+ writes[4].value = AUX_RSV2;
+ writes[5].address = AUXCR;
+ writes[5].value = AUX_INVAL;
+ writes[6].address = AUXCR;
+ writes[6].value = AUX_RPP;
+ writes[7].address = AUXCR;
+ writes[7].value = AUX_STDL;
+ writes[8].address = AUXCR;
+ writes[8].value = AUX_VSTDL;
+ writes[9].address = FAST_TALKER_T1;
nanosec = board->t1_nano_sec;
- writes[i].value = nanosec_to_fast_talker_bits(&nanosec);
+ writes[9].value = nanosec_to_fast_talker_bits(&nanosec);
board->t1_nano_sec = nanosec;
- ++i;
- writes[i].address = ADR;
- writes[i].value = board->pad & ADDRESS_MASK;
- ++i;
- writes[i].address = PPR;
- writes[i].value = 0;
- ++i;
- writes[i].address = SPMR;
- writes[i].value = 0;
- ++i;
- writes[i].address = PROTOCOL_CONTROL;
- writes[i].value = WRITE_COMPLETE_INTERRUPT_EN;
- ++i;
- writes[i].address = IMR0;
- writes[i].value = HR_BOIE | HR_BIIE;
- ++i;
- writes[i].address = IMR1;
- writes[i].value = HR_SRQIE;
- ++i;
+ writes[10].address = ADR;
+ writes[10].value = board->pad & ADDRESS_MASK;
+ writes[11].address = PPR;
+ writes[11].value = 0;
+ writes[12].address = SPMR;
+ writes[12].value = 0;
+ writes[13].address = PROTOCOL_CONTROL;
+ writes[13].value = WRITE_COMPLETE_INTERRUPT_EN;
+ writes[14].address = IMR0;
+ writes[14].value = HR_BOIE | HR_BIIE;
+ writes[15].address = IMR1;
+ writes[15].value = HR_SRQIE;
// turn off reset state
- writes[i].address = AUXCR;
- writes[i].value = AUX_CHIP_RESET;
- ++i;
- writes[i].address = LED_CONTROL;
- writes[i].value = FIRMWARE_LED_CONTROL;
- ++i;
- if (i > ARRAY_SIZE(writes)) {
- dev_err(&usb_dev->dev, "%s: bug! writes[] overflow\n", __func__);
- return -EFAULT;
- }
- retval = agilent_82357a_write_registers(a_priv, writes, i);
+ writes[16].address = AUXCR;
+ writes[16].value = AUX_CHIP_RESET;
+ writes[17].address = LED_CONTROL;
+ writes[17].value = FIRMWARE_LED_CONTROL;
+ retval = agilent_82357a_write_registers(a_priv, writes, INIT_NUM_REG_WRITES);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
return -EIO;
}
hw_control.address = HW_CONTROL;
retval = agilent_82357a_read_registers(a_priv, &hw_control, 1, 1);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "read_registers() returned error\n");
return -EIO;
}
a_priv->hw_control_bits = (hw_control.value & ~0x7) | NOT_TI_RESET | NOT_PARALLEL_POLL;
@@ -1336,7 +1282,7 @@ static int agilent_82357a_attach(gpib_board_t *board, const gpib_board_config_t
}
if (i == MAX_NUM_82357A_INTERFACES) {
dev_err(board->gpib_dev,
- "No Agilent 82357 gpib adapters found, have you loaded its firmware?\n");
+ "No supported adapters found, have you loaded its firmware?\n");
retval = -ENODEV;
goto attach_fail;
}
@@ -1372,8 +1318,7 @@ static int agilent_82357a_attach(gpib_board_t *board, const gpib_board_config_t
goto attach_fail;
}
- dev_info(&usb_dev->dev,
- "bus %d dev num %d attached to gpib minor %d, agilent usb interface %i\n",
+ dev_info(&usb_dev->dev, "bus %d dev num %d attached to gpib%d, interface %i\n",
usb_dev->bus->busnum, usb_dev->devnum, board->minor, i);
mutex_unlock(&agilent_82357a_hotplug_lock);
return retval;
@@ -1390,37 +1335,24 @@ static int agilent_82357a_go_idle(gpib_board_t *board)
struct usb_device *usb_dev = interface_to_usbdev(a_priv->bus_interface);
struct agilent_82357a_register_pairlet writes[0x20];
int retval;
- int i;
- i = 0;
// turn on tms9914 reset state
- writes[i].address = AUXCR;
- writes[i].value = AUX_CS | AUX_CHIP_RESET;
- ++i;
+ writes[0].address = AUXCR;
+ writes[0].value = AUX_CS | AUX_CHIP_RESET;
a_priv->hw_control_bits &= ~NOT_TI_RESET;
- writes[i].address = HW_CONTROL;
- writes[i].value = a_priv->hw_control_bits;
- ++i;
- writes[i].address = PROTOCOL_CONTROL;
- writes[i].value = 0;
- ++i;
- writes[i].address = IMR0;
- writes[i].value = 0;
- ++i;
- writes[i].address = IMR1;
- writes[i].value = 0;
- ++i;
- writes[i].address = LED_CONTROL;
- writes[i].value = 0;
- ++i;
- if (i > ARRAY_SIZE(writes)) {
- dev_err(&usb_dev->dev, "%s: bug! writes[] overflow\n", __func__);
- return -EFAULT;
- }
- retval = agilent_82357a_write_registers(a_priv, writes, i);
+ writes[1].address = HW_CONTROL;
+ writes[1].value = a_priv->hw_control_bits;
+ writes[2].address = PROTOCOL_CONTROL;
+ writes[2].value = 0;
+ writes[3].address = IMR0;
+ writes[3].value = 0;
+ writes[4].address = IMR1;
+ writes[4].value = 0;
+ writes[5].address = LED_CONTROL;
+ writes[5].value = 0;
+ retval = agilent_82357a_write_registers(a_priv, writes, 6);
if (retval) {
- dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n",
- __func__);
+ dev_err(&usb_dev->dev, "write_registers() returned error\n");
return -EIO;
}
return 0;
@@ -1445,7 +1377,6 @@ static void agilent_82357a_detach(gpib_board_t *board)
agilent_82357a_release_urbs(a_priv);
agilent_82357a_free_private(board);
}
- dev_info(board->gpib_dev, "%s: detached\n", __func__);
mutex_unlock(&agilent_82357a_hotplug_lock);
}
@@ -1510,8 +1441,7 @@ static int agilent_82357a_driver_probe(struct usb_interface *interface,
if (i == MAX_NUM_82357A_INTERFACES) {
usb_put_dev(usb_dev);
mutex_unlock(&agilent_82357a_hotplug_lock);
- dev_err(&usb_dev->dev, "%s: out of space in agilent_82357a_driver_interfaces[]\n",
- __func__);
+ dev_err(&usb_dev->dev, "out of space in agilent_82357a_driver_interfaces[]\n");
return -1;
}
path = kmalloc(path_length, GFP_KERNEL);
@@ -1552,13 +1482,12 @@ static void agilent_82357a_driver_disconnect(struct usb_interface *interface)
mutex_unlock(&a_priv->control_alloc_lock);
}
}
- dev_dbg(&usb_dev->dev, "nulled agilent_82357a_driver_interfaces[%i]\n", i);
agilent_82357a_driver_interfaces[i] = NULL;
break;
}
}
if (i == MAX_NUM_82357A_INTERFACES)
- dev_err(&usb_dev->dev, "unable to find interface in agilent_82357a_driver_interfaces[]? bug?\n");
+ dev_err(&usb_dev->dev, "unable to find interface - bug?\n");
usb_put_dev(usb_dev);
mutex_unlock(&agilent_82357a_hotplug_lock);
@@ -1583,18 +1512,18 @@ static int agilent_82357a_driver_suspend(struct usb_interface *interface, pm_mes
agilent_82357a_abort(a_priv, 0);
retval = agilent_82357a_go_idle(board);
if (retval) {
- dev_err(&usb_dev->dev, "%s: failed to go idle, retval=%i\n",
- __func__, retval);
+ dev_err(&usb_dev->dev, "failed to go idle, retval=%i\n",
+ retval);
mutex_unlock(&agilent_82357a_hotplug_lock);
return retval;
}
mutex_lock(&a_priv->interrupt_alloc_lock);
agilent_82357a_cleanup_urbs(a_priv);
mutex_unlock(&a_priv->interrupt_alloc_lock);
- dev_info(&usb_dev->dev,
- "bus %d dev num %d gpib minor %d, agilent usb interface %i suspended\n",
- usb_dev->bus->busnum, usb_dev->devnum,
- board->minor, i);
+ dev_dbg(&usb_dev->dev,
+ "bus %d dev num %d gpib %d, interface %i suspended\n",
+ usb_dev->bus->busnum, usb_dev->devnum,
+ board->minor, i);
}
}
break;
@@ -1631,8 +1560,8 @@ static int agilent_82357a_driver_resume(struct usb_interface *interface)
mutex_lock(&a_priv->interrupt_alloc_lock);
retval = usb_submit_urb(a_priv->interrupt_urb, GFP_KERNEL);
if (retval) {
- dev_err(&usb_dev->dev, "%s: failed to resubmit interrupt urb, retval=%i\n",
- __func__, retval);
+ dev_err(&usb_dev->dev, "failed to resubmit interrupt urb in resume, retval=%i\n",
+ retval);
mutex_unlock(&a_priv->interrupt_alloc_lock);
mutex_unlock(&agilent_82357a_hotplug_lock);
return retval;
@@ -1655,9 +1584,9 @@ static int agilent_82357a_driver_resume(struct usb_interface *interface)
// assert/unassert REN
agilent_82357a_remote_enable(board, a_priv->ren_state);
- dev_info(&usb_dev->dev,
- "bus %d dev num %d gpib minor %d, agilent usb interface %i resumed\n",
- usb_dev->bus->busnum, usb_dev->devnum, board->minor, i);
+ dev_dbg(&usb_dev->dev,
+ "bus %d dev num %d gpib%d, interface %i resumed\n",
+ usb_dev->bus->busnum, usb_dev->devnum, board->minor, i);
}
resume_exit:
@@ -1667,7 +1596,7 @@ static int agilent_82357a_driver_resume(struct usb_interface *interface)
}
static struct usb_driver agilent_82357a_bus_driver = {
- .name = "agilent_82357a_gpib",
+ .name = DRV_NAME,
.probe = agilent_82357a_driver_probe,
.disconnect = agilent_82357a_driver_disconnect,
.suspend = agilent_82357a_driver_suspend,
@@ -1680,19 +1609,18 @@ static int __init agilent_82357a_init_module(void)
int i;
int ret;
- pr_info("agilent_82357a_gpib driver loading");
for (i = 0; i < MAX_NUM_82357A_INTERFACES; ++i)
agilent_82357a_driver_interfaces[i] = NULL;
ret = usb_register(&agilent_82357a_bus_driver);
if (ret) {
- pr_err("agilent_82357a: usb_register failed: error = %d\n", ret);
+ pr_err("usb_register failed: error = %d\n", ret);
return ret;
}
ret = gpib_register_driver(&agilent_82357a_gpib_interface, THIS_MODULE);
if (ret) {
- pr_err("agilent_82357a: gpib_register_driver failed: error = %d\n", ret);
+ pr_err("gpib_register_driver failed: error = %d\n", ret);
usb_deregister(&agilent_82357a_bus_driver);
return ret;
}
@@ -1702,7 +1630,6 @@ static int __init agilent_82357a_init_module(void)
static void __exit agilent_82357a_exit_module(void)
{
- pr_info("agilent_82357a_gpib driver unloading");
gpib_unregister_driver(&agilent_82357a_gpib_interface);
usb_deregister(&agilent_82357a_bus_driver);
}
--
2.48.1
Powered by blists - more mailing lists