[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v67V7PAOC8MLVzE5SwwvpogN_WLNhQnRVD2pikGVDHtJjA@mail.gmail.com>
Date: Mon, 17 Feb 2025 23:48:13 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Andre Przywara <andre.przywara@....com>
Cc: Linus Walleij <linus.walleij@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Jernej Skrabec <jernej.skrabec@...il.com>, Samuel Holland <samuel@...lland.org>,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 4/8] pinctrl: sunxi: support moved power configuration registers
On Fri, Feb 14, 2025 at 8:40 AM Andre Przywara <andre.przywara@....com> wrote:
>
> The Allwinner pincontroller IP features some registers to control the
> withstand voltage of each pin group. So far those registers were always
> located at the same offset, but the A523 SoC has moved them (probably to
> accommodate all eleven pin banks).
>
> Add a flag to note this feature, and use that to program the registers
> either at offset 0x340 or 0x380. So far no pincontroller driver uses
> this flag, but we need it for the upcoming A523 support.
>
> Signed-off-by: Andre Przywara <andre.przywara@....com>
> ---
> drivers/pinctrl/sunxi/pinctrl-sunxi.c | 15 +++++++++++----
> drivers/pinctrl/sunxi/pinctrl-sunxi.h | 7 +++++--
> 2 files changed, 16 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> index 83a031ceb29f2..a1057122272bd 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> @@ -736,9 +736,9 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
> val = uV > 1800000 && uV <= 2500000 ? BIT(bank) : 0;
>
> raw_spin_lock_irqsave(&pctl->lock, flags);
> - reg = readl(pctl->membase + PIO_POW_MOD_CTL_REG);
> + reg = readl(pctl->membase + pctl->pow_mod_sel_offset);
> reg &= ~BIT(bank);
> - writel(reg | val, pctl->membase + PIO_POW_MOD_CTL_REG);
> + writel(reg | val, pctl->membase + pctl->pow_mod_sel_offset);
> raw_spin_unlock_irqrestore(&pctl->lock, flags);
>
> fallthrough;
> @@ -746,9 +746,12 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
> val = uV <= 1800000 ? 1 : 0;
>
> raw_spin_lock_irqsave(&pctl->lock, flags);
> - reg = readl(pctl->membase + PIO_POW_MOD_SEL_REG);
> + reg = readl(pctl->membase + pctl->pow_mod_sel_offset +
> + PIO_POW_MOD_SEL_OFS);
> reg &= ~(1 << bank);
> - writel(reg | val << bank, pctl->membase + PIO_POW_MOD_SEL_REG);
> + writel(reg | val << bank,
> + pctl->membase + pctl->pow_mod_sel_offset +
> + PIO_POW_MOD_SEL_OFS);
> raw_spin_unlock_irqrestore(&pctl->lock, flags);
> return 0;
> default:
> @@ -1520,6 +1523,10 @@ int sunxi_pinctrl_init_with_flags(struct platform_device *pdev,
> pctl->pull_regs_offset = PULL_REGS_OFFSET;
> pctl->dlevel_field_width = DLEVEL_FIELD_WIDTH;
> }
> + if (flags & SUNXI_PINCTRL_ELEVEN_BANKS)
> + pctl->pow_mod_sel_offset = PIO_11B_POW_MOD_SEL_REG;
> + else
> + pctl->pow_mod_sel_offset = PIO_POW_MOD_SEL_REG;
>
> pctl->irq_array = devm_kcalloc(&pdev->dev,
> IRQ_PER_BANK * pctl->desc->irq_banks,
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> index 6cf721876d89d..a93385e456a57 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> @@ -87,9 +87,11 @@
> #define SUNXI_PINCTRL_VARIANT_MASK GENMASK(7, 0)
> #define SUNXI_PINCTRL_NEW_REG_LAYOUT BIT(8)
> #define SUNXI_PINCTRL_PORTF_SWITCH BIT(9)
> +#define SUNXI_PINCTRL_ELEVEN_BANKS BIT(10)
>
> -#define PIO_POW_MOD_SEL_REG 0x340
> -#define PIO_POW_MOD_CTL_REG 0x344
> +#define PIO_POW_MOD_SEL_REG 0x340
> +#define PIO_11B_POW_MOD_SEL_REG 0x380
> +#define PIO_POW_MOD_SEL_OFS 0x004
Shouldn't this be PIO_POW_MOD_CTL_OFS instead?
ChenYu
>
> #define PIO_BANK_K_OFFSET 0x500
>
> @@ -173,6 +175,7 @@ struct sunxi_pinctrl {
> u32 bank_mem_size;
> u32 pull_regs_offset;
> u32 dlevel_field_width;
> + u32 pow_mod_sel_offset;
> };
>
> #define SUNXI_PIN(_pin, ...) \
> --
> 2.46.3
>
Powered by blists - more mailing lists