[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ee7xdxyxjs46zfbotsa6hdmwpsvrkaere2hend4iavcvk6duqn@ogvght5qcx7b>
Date: Thu, 20 Feb 2025 18:17:20 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Jun Nie <jun.nie@...aro.org>
Cc: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>, Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>, David Airlie <airlied@...il.com>,
Simona Vetter <simona@...ll.ch>, Jessica Zhang <quic_jesszhan@...cinc.com>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 12/15] drm/msm/dpu: blend pipes per mixer pairs config
On Thu, Feb 20, 2025 at 11:48:45PM +0800, Jun Nie wrote:
> Dmitry Baryshkov <dmitry.baryshkov@...aro.org> 于2025年2月18日周二 03:57写道:
> >
> > On Mon, Feb 17, 2025 at 10:16:01PM +0800, Jun Nie wrote:
> > > Currently, only 2 pipes are used at most for a plane. A stage structure
> > > describes the configuration for a mixer pair. So only one stage is needed
> > > for current usage cases. The quad-pipe case will be added in future and 2
> > > stages are used in the case. So extend the stage to an array with array size
> > > STAGES_PER_PLANE and blend pipes per mixer pair with configuration in the
> > > stage structure.
> > >
> > > Signed-off-by: Jun Nie <jun.nie@...aro.org>
> > > ---
> > > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 45 +++++++++++++++++++----------
> > > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 1 +
> > > 2 files changed, 30 insertions(+), 16 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > > index 81474823e6799132db71c9712046d359e3535d90..50acaf25a3ffcc94354faaa816fe74566784844c 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > > @@ -401,7 +401,7 @@ static void _dpu_crtc_blend_setup_pipe(struct drm_crtc *crtc,
> > > struct dpu_hw_stage_cfg *stage_cfg
> > > )
> > > {
> > > - uint32_t lm_idx;
> > > + uint32_t lm_idx, lm_in_pair;
> > > enum dpu_sspp sspp_idx;
> > > struct drm_plane_state *state;
> > >
> > > @@ -426,7 +426,8 @@ static void _dpu_crtc_blend_setup_pipe(struct drm_crtc *crtc,
> > > stage_cfg->multirect_index[stage][stage_idx] = pipe->multirect_index;
> > >
> > > /* blend config update */
> > > - for (lm_idx = 0; lm_idx < num_mixers; lm_idx++)
> > > + lm_in_pair = num_mixers > 1 ? 2 : 1;
> > > + for (lm_idx = 0; lm_idx < lm_in_pair; lm_idx++)
> > > mixer[lm_idx].lm_ctl->ops.update_pending_flush_sspp(mixer[lm_idx].lm_ctl, sspp_idx);
> >
> > I almost missed this. Why is this necessary?
>
> It is protective code. In case there is only 1 LM, we should not
> iterate 2 LM in a stage.
That's not what the code does.
> >
> > > }
> > >
> >
> > [...]
> >
> > > @@ -535,8 +543,13 @@ static void _dpu_crtc_blend_setup(struct drm_crtc *crtc)
> > > mixer[i].mixer_op_mode,
> > > ctl->idx - CTL_0);
> > >
> > > + /*
> > > + * call dpu_hw_ctl_setup_blendstage() to blend layers per stage cfg.
> > > + * There are 4 mixers at most. The first 2 are for the left half, and
> > > + * the later 2 are for the right half.
> > > + */
> >
> > The comment is invalid until you introduce quad pipe, currently there
> > are 2 mixers at most. However you can just say something like 'stage
> > data is shared between PIPES_PER_STAGE pipes'.
>
> Accepted.
> >
> > > ctl->ops.setup_blendstage(ctl, mixer[i].hw_lm->idx,
> > > - &stage_cfg);
> > > + &stage_cfg[i / PIPES_PER_STAGE]);
> > > }
> > > }
> > >
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> > > index 5f010d36672cc6440c69779908b315aab285eaf0..64e220987be5682f26d02074505c5474a547a814 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> > > @@ -34,6 +34,7 @@
> > > #define DPU_MAX_PLANES 4
> > > #endif
> > >
> > > +#define STAGES_PER_PLANE 2
BTW, This should be 1 for now.
> > > #define PIPES_PER_PLANE 2
> > > #define PIPES_PER_STAGE 2
> > > #ifndef DPU_MAX_DE_CURVES
> > >
> > > --
> > > 2.34.1
> > >
> >
> > --
> > With best wishes
> > Dmitry
--
With best wishes
Dmitry
Powered by blists - more mailing lists