linux-kernel - Re: Avermedia DVD EZMaker 7 video distortion on capture

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <99cc3844-54bd-44f5-88c5-9570fae709a7@xs4all.nl>
Date: Mon, 24 Feb 2025 15:12:10 +0100
From: Hans Verkuil <hverkuil@...all.nl>
To: Randy Kimmett <linuxish@...look.com>,
 "mchehab@...nel.org" <mchehab@...nel.org>
Cc: "linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
 "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: Avermedia DVD EZMaker 7 video distortion on capture

On 15/02/2025 17:18, Randy Kimmett wrote:
> Avermedia DVD EZMaker 7
> Model: C039
> VID:07CA PID:C039
> Module used: cx231xx
> Distro: Manjaro
> Kernel version: 6.13.0-1
> Components used: Conexant CX23012-11Z (according to https://www.linuxtv.org/wiki/index.php/AVerMedia_DVD_EZMaker_7_(C039))
> 
> When capturing analog video from my old Hi8 video camera (NTSC M), the captured video has banding and is grainy, it doesn't matter if I capture from the S-Video or Composite, the results are the same.  On my windows PC the capture is perfect.
> 
> dmesg output:
> 
> [31173.105709] cx231xx 3-1:1.1: New device AVerMedia TECHNOLOGIES, Inc. AVerMedia C039 USB Pure Capture @ 480 Mbps (07ca:c039) with 7 interfaces
> [31173.106062] cx231xx 3-1:1.1: can't change interface 4 alt no. to 3: Max. Pkt size = 0
> [31173.106065] cx231xx 3-1:1.1: Identified as Conexant VIDEO GRABBER (card=5)
> [31173.106649] i2c i2c-13: Added multiplexed i2c bus 15
> [31173.106704] i2c i2c-13: Added multiplexed i2c bus 16
> [31173.214440] cx25840 12-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
> [31175.444434] cx25840 12-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
> [31175.493936] cx231xx 3-1:1.1: v4l2 driver version 0.0.3
> [31175.620281] cx231xx 3-1:1.1: Registered video device video2 [v4l2]
> [31175.620318] cx231xx 3-1:1.1: Registered VBI device vbi0
> [31175.620423] cx231xx 3-1:1.1: audio EndPoint Addr 0x83, Alternate settings: 3
> [31175.620426] cx231xx 3-1:1.1: video EndPoint Addr 0x84, Alternate settings: 5
> [31175.620429] cx231xx 3-1:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
> [31175.620431] cx231xx 3-1:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
> [31175.620433] cx231xx 3-1:1.1: TS EndPoint Addr 0x81, Alternate settings: 6
> 
> https://bugzilla.kernel.org/show_bug.cgi?id=219764 (also contains a sample video clip of the issue)
> https://www.linuxtv.org/wiki/index.php/AVerMedia_DVD_EZMaker_7_(C039)
> 
> 
> Any help and/or suggestions would be greatly appreciated. :)

I tested this today, and unfortunately for you it works fine for me.

I do not have this specific model, but it falls back to card 5 (Conexant VIDEO GRABBER)
and I happen to have the Conexant VIDEO GRABBER, so I tested with that, capturing NTSC
on the S-Video input. And it is fine.

Since you can test under Windows, check the .INF file that is provided for the
Windows driver: that can sometimes contain useful information about how the
card should be configured. You can mail it to me and I can take a look at it
if this is not something you can do yourself.

Don't hold your breath though.

Regards,

	Hans