| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e5d967b9-fbc0-497f-a4a4-6f2bdc902400@linux.alibaba.com>
Date: Wed, 26 Feb 2025 15:11:45 +0800
From: Baolin Wang <baolin.wang@...ux.alibaba.com>
To: Zi Yan <ziy@...dia.com>, linux-mm@...ck.org,
Andrew Morton <akpm@...ux-foundation.org>,
"Kirill A . Shutemov" <kirill.shutemov@...ux.intel.com>,
"Matthew Wilcox (Oracle)" <willy@...radead.org>
Cc: Ryan Roberts <ryan.roberts@....com>, Hugh Dickins <hughd@...gle.com>,
David Hildenbrand <david@...hat.com>, Yang Shi
<yang@...amperecomputing.com>, Miaohe Lin <linmiaohe@...wei.com>,
Kefeng Wang <wangkefeng.wang@...wei.com>, Yu Zhao <yuzhao@...gle.com>,
John Hubbard <jhubbard@...dia.com>, linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v8 1/8] xarray: add xas_try_split() to split a multi-index
entry
Hi Zi,
On 2025/2/19 07:50, Zi Yan wrote:
> A preparation patch for non-uniform folio split, which always split a
> folio into half iteratively, and minimal xarray entry split.
>
> Currently, xas_split_alloc() and xas_split() always split all slots from a
> multi-index entry. They cost the same number of xa_node as the
> to-be-split slots. For example, to split an order-9 entry, which takes
> 2^(9-6)=8 slots, assuming XA_CHUNK_SHIFT is 6 (!CONFIG_BASE_SMALL), 8
> xa_node are needed. Instead xas_try_split() is intended to be used
> iteratively to split the order-9 entry into 2 order-8 entries, then split
> one order-8 entry, based on the given index, to 2 order-7 entries, ...,
> and split one order-1 entry to 2 order-0 entries. When splitting the
> order-6 entry and a new xa_node is needed, xas_try_split() will try to
> allocate one if possible. As a result, xas_try_split() would only need
> one xa_node instead of 8.
>
> When a new xa_node is needed during the split, xas_try_split() can try to
> allocate one but no more. -ENOMEM will be return if a node cannot be
> allocated. -EINVAL will be return if a sibling node is split or cascade
> split happens, where two or more new nodes are needed, and these are not
> supported by xas_try_split().
>
> xas_split_alloc() and xas_split() split an order-9 to order-0:
>
> ---------------------------------
> | | | | | | | | |
> | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
> | | | | | | | | |
> ---------------------------------
> | | | |
> ------- --- --- -------
> | | ... | |
> V V V V
> ----------- ----------- ----------- -----------
> | xa_node | | xa_node | ... | xa_node | | xa_node |
> ----------- ----------- ----------- -----------
>
> xas_try_split() splits an order-9 to order-0:
> ---------------------------------
> | | | | | | | | |
> | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
> | | | | | | | | |
> ---------------------------------
> |
> |
> V
> -----------
> | xa_node |
> -----------
>
> Signed-off-by: Zi Yan <ziy@...dia.com>
> Cc: Baolin Wang <baolin.wang@...ux.alibaba.com>
> Cc: David Hildenbrand <david@...hat.com>
> Cc: Hugh Dickins <hughd@...gle.com>
> Cc: John Hubbard <jhubbard@...dia.com>
> Cc: Kefeng Wang <wangkefeng.wang@...wei.com>
> Cc: Kirill A. Shuemov <kirill.shutemov@...ux.intel.com>
> Cc: Miaohe Lin <linmiaohe@...wei.com>
> Cc: Matthew Wilcox <willy@...radead.org>
> Cc: Ryan Roberts <ryan.roberts@....com>
> Cc: Yang Shi <yang@...amperecomputing.com>
> Cc: Yu Zhao <yuzhao@...gle.com>
> Cc: Zi Yan <ziy@...dia.com>
> ---
> Documentation/core-api/xarray.rst | 14 ++-
> include/linux/xarray.h | 7 ++
> lib/test_xarray.c | 47 ++++++++++
> lib/xarray.c | 138 ++++++++++++++++++++++++++----
> tools/testing/radix-tree/Makefile | 1 +
> 5 files changed, 190 insertions(+), 17 deletions(-)
>
> diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst
> index f6a3eef4fe7f..c6c91cbd0c3c 100644
> --- a/Documentation/core-api/xarray.rst
> +++ b/Documentation/core-api/xarray.rst
> @@ -489,7 +489,19 @@ Storing ``NULL`` into any index of a multi-index entry will set the
> entry at every index to ``NULL`` and dissolve the tie. A multi-index
> entry can be split into entries occupying smaller ranges by calling
> xas_split_alloc() without the xa_lock held, followed by taking the lock
> -and calling xas_split().
> +and calling xas_split() or calling xas_try_split() with xa_lock. The
> +difference between xas_split_alloc()+xas_split() and xas_try_alloc() is
> +that xas_split_alloc() + xas_split() split the entry from the original
> +order to the new order in one shot uniformly, whereas xas_try_split()
> +iteratively splits the entry containing the index non-uniformly.
> +For example, to split an order-9 entry, which takes 2^(9-6)=8 slots,
> +assuming ``XA_CHUNK_SHIFT`` is 6, xas_split_alloc() + xas_split() need
> +8 xa_node. xas_try_split() splits the order-9 entry into
> +2 order-8 entries, then split one order-8 entry, based on the given index,
> +to 2 order-7 entries, ..., and split one order-1 entry to 2 order-0 entries.
> +When splitting the order-6 entry and a new xa_node is needed, xas_try_split()
> +will try to allocate one if possible. As a result, xas_try_split() would only
> +need 1 xa_node instead of 8.
>
> Functions and structures
> ========================
> diff --git a/include/linux/xarray.h b/include/linux/xarray.h
> index 0b618ec04115..9eb8c7425090 100644
> --- a/include/linux/xarray.h
> +++ b/include/linux/xarray.h
> @@ -1555,6 +1555,8 @@ int xa_get_order(struct xarray *, unsigned long index);
> int xas_get_order(struct xa_state *xas);
> void xas_split(struct xa_state *, void *entry, unsigned int order);
> void xas_split_alloc(struct xa_state *, void *entry, unsigned int order, gfp_t);
> +void xas_try_split(struct xa_state *xas, void *entry, unsigned int order,
> + gfp_t gfp);
> #else
> static inline int xa_get_order(struct xarray *xa, unsigned long index)
> {
> @@ -1576,6 +1578,11 @@ static inline void xas_split_alloc(struct xa_state *xas, void *entry,
> unsigned int order, gfp_t gfp)
> {
> }
> +
> +static inline void xas_try_split(struct xa_state *xas, void *entry,
> + unsigned int order, gfp_t gfp)
> +{
> +}
> #endif
>
> /**
[snip]
> diff --git a/lib/xarray.c b/lib/xarray.c
> index 116e9286c64e..b9a63d7fbd58 100644
> --- a/lib/xarray.c
> +++ b/lib/xarray.c
> @@ -1007,6 +1007,31 @@ static void node_set_marks(struct xa_node *node, unsigned int offset,
> }
> }
>
> +static struct xa_node *__xas_alloc_node_for_split(struct xa_state *xas,
> + void *entry, gfp_t gfp)
> +{
> + unsigned int i;
> + void *sibling = NULL;
> + struct xa_node *node;
> + unsigned int mask = xas->xa_sibs;
> +
> + node = kmem_cache_alloc_lru(radix_tree_node_cachep, xas->xa_lru, gfp);
> + if (!node)
> + return NULL;
> + node->array = xas->xa;
> + for (i = 0; i < XA_CHUNK_SIZE; i++) {
> + if ((i & mask) == 0) {
> + RCU_INIT_POINTER(node->slots[i], entry);
> + sibling = xa_mk_sibling(i);
> + } else {
> + RCU_INIT_POINTER(node->slots[i], sibling);
> + }
> + }
> + RCU_INIT_POINTER(node->parent, xas->xa_alloc);
> +
> + return node;
> +}
> +
> /**
> * xas_split_alloc() - Allocate memory for splitting an entry.
> * @xas: XArray operation state.
> @@ -1025,7 +1050,6 @@ void xas_split_alloc(struct xa_state *xas, void *entry, unsigned int order,
> gfp_t gfp)
> {
> unsigned int sibs = (1 << (order % XA_CHUNK_SHIFT)) - 1;
> - unsigned int mask = xas->xa_sibs;
>
> /* XXX: no support for splitting really large entries yet */
> if (WARN_ON(xas->xa_shift + 2 * XA_CHUNK_SHIFT <= order))
> @@ -1034,23 +1058,9 @@ void xas_split_alloc(struct xa_state *xas, void *entry, unsigned int order,
> return;
>
> do {
> - unsigned int i;
> - void *sibling = NULL;
> - struct xa_node *node;
> -
> - node = kmem_cache_alloc_lru(radix_tree_node_cachep, xas->xa_lru, gfp);
> + struct xa_node *node = __xas_alloc_node_for_split(xas, entry, gfp);
> if (!node)
> goto nomem;
> - node->array = xas->xa;
> - for (i = 0; i < XA_CHUNK_SIZE; i++) {
> - if ((i & mask) == 0) {
> - RCU_INIT_POINTER(node->slots[i], entry);
> - sibling = xa_mk_sibling(i);
> - } else {
> - RCU_INIT_POINTER(node->slots[i], sibling);
> - }
> - }
> - RCU_INIT_POINTER(node->parent, xas->xa_alloc);
> xas->xa_alloc = node;
> } while (sibs-- > 0);
>
> @@ -1122,6 +1132,102 @@ void xas_split(struct xa_state *xas, void *entry, unsigned int order)
> xas_update(xas, node);
> }
> EXPORT_SYMBOL_GPL(xas_split);
> +
> +/**
> + * xas_try_split() - Try to split a multi-index entry.
> + * @xas: XArray operation state.
> + * @entry: New entry to store in the array.
> + * @order: Current entry order.
> + * @gfp: Memory allocation flags.
> + *
> + * The size of the new entries is set in @xas. The value in @entry is
> + * copied to all the replacement entries. If and only if one xa_node needs to
> + * be allocated, the function will use @gfp to get one. If more xa_node are
> + * needed, the function gives EINVAL error.
> + *
> + * Context: Any context. The caller should hold the xa_lock.
> + */
> +void xas_try_split(struct xa_state *xas, void *entry, unsigned int order,
> + gfp_t gfp)
The xas_try_split() may sleep if ‘gfp’ flags permit while holding the
xa_lock, which can cause issues. So can we add a check for the ‘gfp’ or
only use GFP_NOWAIT?
Powered by blists - more mailing lists