| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250226102507.3743437-1-heiko@sntech.de>
Date: Wed, 26 Feb 2025 11:25:07 +0100
From: Heiko Stuebner <heiko@...ech.de>
To: heiko@...ech.de
Cc: quentin.schulz@...rry.de,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org,
lukasz.czechowski@...umatec.com,
Heiko Stuebner <heiko.stuebner@...rry.de>
Subject: [PATCH v3] arm64: dts: rockchip: add usb typec host support to rk3588-jaguar
From: Heiko Stuebner <heiko.stuebner@...rry.de>
Jaguar has two type-c ports connected to fusb302 controllers that can
work both in host and device mode and can also run in display-port
altmode.
While these ports can work in dual-role data mode, they do not support
powering the device itself as power-sink. This causes issues because
the current infrastructure does not cope well with dual-role data
without dual-role power.
So add the necessary nodes for the type-c controllers as well
as enable the relevant core usb nodes, but limit the mode to host-mode
for now until we figure out device mode.
Signed-off-by: Heiko Stuebner <heiko.stuebner@...rry.de>
---
changes in v3:
- more review comments from Quentin
(sbu-pin pinctrl, comments)
changes in v2:
- address review comments from Quentin
(comments, pinctrl, sbu-gpios and much more)
.../arm64/boot/dts/rockchip/rk3588-jaguar.dts | 218 ++++++++++++++++++
1 file changed, 218 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
index 20b566d4168f..5dbcdf67f0a5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
@@ -333,6 +333,56 @@ rtc_twi: rtc@6f {
};
};
+ typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cc_int1>;
+ vbus-supply = <&vcc_5v0_usb_c1>;
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USBC-1 P11";
+ power-role = "source";
+ self-powered;
+ source-pdos =
+ <PDO_FIXED(5000, 1500, PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)>;
+ vbus-supply = <&vcc_5v0_usb_c1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc0_hs: endpoint {
+ remote-endpoint = <&usb_host0_xhci_drd_sw>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc0_ss: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usbc0_sbu: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_sbu>;
+ };
+ };
+ };
+ };
+ };
+
vdd_npu_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
@@ -394,6 +444,56 @@ &i2c8 {
pinctrl-0 = <&i2c8m2_xfer>;
status = "okay";
+ typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cc_int2>;
+ vbus-supply = <&vcc_5v0_usb_c2>;
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USBC-2 P12";
+ power-role = "source";
+ self-powered;
+ source-pdos =
+ <PDO_FIXED(5000, 1500, PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)>;
+ vbus-supply = <&vcc_5v0_usb_c2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc1_hs: endpoint {
+ remote-endpoint = <&usb_host1_xhci_drd_sw>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc1_ss: endpoint {
+ remote-endpoint = <&usbdp_phy1_typec_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usbc1_sbu: endpoint {
+ remote-endpoint = <&usbdp_phy1_typec_sbu>;
+ };
+ };
+ };
+ };
+ };
+
vdd_cpu_big0_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
@@ -483,6 +583,26 @@ pcie30x4_waken_m0: pcie30x4-waken-m0 {
rockchip,pins = <0 RK_PC7 12 &pcfg_pull_none>;
};
};
+
+ usb3 {
+ cc_int1: cc-int1 {
+ rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ cc_int2: cc-int2 {
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ typec0_sbu_pins: typec0-sbu-pins {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ typec1_sbu_pins: typec1-sbu-pins {
+ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&saradc {
@@ -850,6 +970,24 @@ &tsadc {
status = "okay";
};
+/* USB-C P11 connector */
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+/* USB-C P12 connector */
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
&u2phy2 {
status = "okay";
};
@@ -892,6 +1030,56 @@ &uart7 {
status = "okay";
};
+/* Type-C on P11 */
+&usbdp_phy0 {
+ orientation-switch;
+ pinctrl-names = "default";
+ pinctrl-0 = <&typec0_sbu_pins>;
+ sbu1-dc-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* Q7_USB_C0_SBU1_DC */
+ sbu2-dc-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; /* Q7_USB_C0_SBU2_DC */
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_typec_ss: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_ss>;
+ };
+
+ usbdp_phy0_typec_sbu: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usbc0_sbu>;
+ };
+ };
+};
+
+/* Type-C on P12 */
+&usbdp_phy1 {
+ orientation-switch;
+ pinctrl-names = "default";
+ pinctrl-0 = <&typec1_sbu_pins>;
+ sbu1-dc-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; /* Q7_USB_C1_SBU1_DC */
+ sbu2-dc-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; /* Q7_USB_C1_SBU2_DC */
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy1_typec_ss: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc1_ss>;
+ };
+
+ usbdp_phy1_typec_sbu: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usbc1_sbu>;
+ };
+ };
+};
+
/* host0 on P10 USB-A */
&usb_host0_ehci {
status = "okay";
@@ -902,6 +1090,36 @@ &usb_host0_ohci {
status = "okay";
};
+/* host0 on P11 USB-C */
+&usb_host0_xhci {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_host0_xhci_drd_sw: endpoint {
+ remote-endpoint = <&usbc0_hs>;
+ };
+ };
+};
+
+/* host1 on P12 USB-C */
+&usb_host1_xhci {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_host1_xhci_drd_sw: endpoint {
+ remote-endpoint = <&usbc1_hs>;
+ };
+ };
+};
+
/* host1 on M.2 E-key */
&usb_host1_ehci {
status = "okay";
--
2.47.2
Powered by blists - more mailing lists